この製品には新バージョンがあります
比較対象デバイスにアップグレード機能を搭載した、ドロップ・イン代替製品。
比較対象デバイスと同等の機能で、ピン配置が異なる製品。
TPS7A53
- 0.5% (max) accuracy over line, load, and temperature with BIAS
- Output voltage noise: 4.4 µVRMS
- Low dropout: 110 mV (max) at 3 A with BIAS
- Power-supply rejection ratio:
- 40 dB at 500 kHz
- Input voltage range:
- Without BIAS: 1.4 V to 6.5 V
- With BIAS: 1.1 V to 6.5 V
- Adjustable output voltage range: 0.8 V to 5.2 V
- Adjustable soft-start inrush control
- Open-drain, power-good (PG) output
- 2.2-mm × 2.5-mm, 12-pin VQFN package
The TPS7A53 is a low-noise (4.4 µVRMS), ultra-low dropout linear-regulator (LDO) capable of sourcing 3 A with only 110 mV of maximum dropout. The device output voltage is adjustable from 0.8 V to 5.2 V using an external resistor divider.
The combination of low noise (4.4 µVRMS), high PSRR, and high
output current capability makes the TPS7A53 an excellent choice to power noise-sensitive components
such as those found in high-speed communications, video, medical, or test-and-measurement
applications. The high performance of this device limits power-supply-generated phase noise and
clock jitter, making this device ideal for powering high-performance serializer and deserializer
(SerDes), analog-to-digital converters (ADCs), and digital-to-analog converters (DACs).
Specifically, RF amplifiers benefit from the high performance and
5.2-V output capability of the device.
For digital loads [such as application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and digital signal processors (DSPs)] requiring low-input voltage, low-output (LILO) voltage operation, the exceptional accuracy (0.5% over load and temperature), remote sensing, excellent transient performance, and soft-start capabilities of the TPS7A53 provides optimal system performance.
As an adjustable voltage regulator, there is versatility in the design of the TPS7A53 that makes the device a component of choice for analog loads such as VCO, ADC, DAC, and imaging sensors and for digital loads such as SerDes, FPGAs, and DSPs.
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | TPS7A53 3-A, High-Accuracy (0.5%), Low-Noise (4.4 µVRMS), LDO Voltage Regulator データシート (Rev. B) | PDF | HTML | 2020/05/07 | ||
| ホワイト・ペーパー | LDO ターンオン (スタートアップ) 時間の明確化 | PDF | HTML | PDF | HTML | 2026/04/27 | ||
| ホワイト・ペーパー | Reduce System Noise Using Parallel LDOs | PDF | HTML | 2025/11/03 | |||
| ホワイト・ペーパー | Parallel LDO Architecture Design Using Ballast Resistors | PDF | HTML | 2022/12/14 | |||
| ホワイト・ペーパー | Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast | PDF | HTML | 2022/12/13 | |||
| アプリケーション・ノート | Point-of-Load Solutions for Network Interface Cards (NIC) | PDF | HTML | 2021/09/08 | |||
| 技術記事 | Minimize noise and ripple with a low-noise buck converter | PDF | HTML | 2020/10/21 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
TPS7A53EVM-031 — TPS7A53 3A、低入力電圧範囲 (VIN)、低ノイズ、高精度、超低ドロップアウト (LDO) 電圧レギュレータの評価基板
TPS7A53 評価基板 (EVM) は、TPS7A53 デバイスの動作と性能を評価するための標準的な構成を意図した設計を採用しています。このデバイスは、高精度、3A、低入力電圧範囲 (VIN)、低出力電圧 (VOUT)、低ドロップアウト (LDO) 電圧レギュレータです。
この EVM 基板は、動的な負荷に対して最大 3 A の電流を供給するアプリケーションを製作するためのリファレンス デザインを意図した構成を採用しています。
PARALLEL-LDO-CALC — Parallel low-dropout (LDO) calculator
パラレル LDO カリキュレータは、Microsoft® Excel®-ベースのツールであり、複数のバラスト抵抗を使用してパラレル LDO レギュレータのワーストケース分析を提供することができます。このツールを使用すると、必要なパラレル LDO レギュレータの最少数と、一連のシステム要件に最適なバラスト抵抗を特定することができます。
パラレル アプリケーションで使用する一般的な LDO レギュレータのデータシート情報は、このカリキュレータにあらかじめ入力済みです。開発ユーザーは、開発中システムの要件に基づいて、システムのニーズに最もよく調和する LDO レギュレータ (...)
TIDA-010230 — レーダーと EW (電子戦) の各アプリケーション向け、マルチチャネル RF トランシーバ、低ノイズ クロック処理のリファレンス デザイン
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| VQFN-HR (RPS) | 12 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。