DLPC900
- Scalable controller supporting DLP500YX, DLP5500, DLP6500, DLP670S, and DLP9000 digital micromirror devices (DMDs) for high-resolution industrial and display applications
- Supports multiple high-speed pattern rates up
to:
- 16129Hz (DLP500YX, 1-bit pre-stored pattern mode)
- 2016Hz (DLP500YX, 8-bit pre-stored pattern mode with illumination modulation)
- 1008Hz (DLP500YX, 16-bit pre-stored pattern mode with illumination modulation)
- Internal DRAM: 128 megabytes
- External flash capability: 128-megabyte external flash capability
- 1-to-1 input mapping to micromirrors
- Easy synchronization with cameras and sensors
- Two configurable input and output triggers
- Fully programmable GPIO and PWM signals
- Multiple control interfaces
- One USB 1.1 target port and three I2C ports
- LED enable and PWM generators
- Video mode
- Dual 24-bit RGB inputs up to 120Hz
- YUV, YCrCb, or RGB data format
- Standard video from XGA to WQXGA
- DLP9000 (WQXGA), DLP500YX (2048 × 1200), and DLP670S (2716 × 1600) require two DLPC900 controllers
The DLP DLPC900 is a scalable digital micromirror device (DMD) controller that supports reliable operation of DLP500YX, DLP5500, DLP6500, DLP670S, and DLP9000 DMDs. This high-performance DMD controller enables programmable, high-speed pattern rates for advanced light control, especially in industrial applications. DLPC900 pattern rates enable fast and accurate 3D scanning and 3D printing, as well as support high-resolution and intelligent imaging applications. DLPC900 offers 128 megabytes of embedded internal DRAM for convenient buffering of between 400 to 1024 1-bit patterns depending on DMD. Input and output triggers offer easy connection and synchronization with a variety of cameras, sensors, and other peripherals.
Go to the TI DLP® light-control technology page to learn how to get started. DLP advanced light control resources include evaluation modules, reference designs, optical module manufacturers, and DLP design network partners.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DLPLCRC900DEVM — DLP® LightCrafter™ 듀얼 DLPC900 평가 모듈
이 DLP 평가 모듈(EVM)에는 DLPC900 DMD(디지털 마이크로미러 디바이스) 컨트롤러 2개가 포함되어 있어 DLPLCR50XEVM, DLPLCR67EVM, DLPLCR90EVM 및 기타 호환 DMD EVM의 구성 가능한 제어가 가능합니다. 카메라, 센서 또는 기타 주변 장치와 편리하게 동기화할 수 있는 입력 /출력 트리거를 제공합니다. 추가된 유연성으로 산업용, 의료용, 계측, 보안, 통신 및 계측 애플리케이션을 위한 다양한 아키텍처가 가능합니다.
DLPLCRC900DEVM은 DLP 기술을 다양한 조명 스티어링 (...)
DLPLCRC900EVM — DLP® LightCrafter™ 싱글 DLPC900 평가 모듈
이 DLP 평가 모듈(EVM)에는 DLPC900 DMD(디지털 마이크로미러 디바이스) 컨트롤러 1개가 포함되어 있어 DLPLCR65EVM 및 기타 호환 DMD EVM의 구성 가능한 제어가 가능합니다. 카메라, 센서 또는 기타 주변 장치와 편리하게 동기화할 수 있는 입력 /출력 트리거를 제공합니다. 추가된 유연성으로 산업용, 의료용, 계측, 보안, 통신 및 계측 애플리케이션을 위한 다양한 아키텍처가 가능합니다.
DLPLCRC900EVM은 DLP 기술을 다양한 조명 스티어링 애플리케이션에 통합하기 위한 매우 유연한 개발 키트를 필요로 (...)
DLI-3P-DLI6500 — DLP6500용 DLi6500 1080p 개발 키트
DLI-3P-DLI9000 — DLP9000용 DLi 3DLP9000 조명 엔진
VISI-3P-LRS-WQ — Visitech LUXBEAM Rapid System WQ
The LUXBEAM® Rapid System LRS-WQ is a DLP® technology based stereo lithography sub-system specifically designed for professional 3D printing and Additive Manufacturing systems. With the robust and reliable high resolution DLP9000 WQXGA chip, the LRS-WQ offers long lifetime and low (...)
INV-3P-FIREBIRD — DLP9000용 In-Vision Firebird, 고해상도 3D 프린터 조명 엔진
In-Vision의 Firebird 광학 모듈은 2560x1600 픽셀의 기본 해상도와 7.6 µm의 마이크로미러 피치 크기로 DLP9000을 지원합니다. 딥 블루 LED 조명에 최적화. Firebird는 높은 픽셀 해상도와 뛰어난 광학 성능을 갖춘 구조화된 경량 애플리케이션플을 지원합니다. 프로젝션 장치에는 개별 응용 분야의 요구 사항을 충족하기 위해 교환 가능한 렌즈 어셈블리의 여러 옵션이 있습니다. In-Vision은 맞춤형 렌즈 솔루션을 설계하고 제조할 수도 있습니다. 애플리케이션 분야: 3D 프린팅, 노광, 생물공학 및 (...)
INV-3P-HELIOS — In-Vision Helios, DLP9000을 사용하는 적층 가공 조명 엔진
DLP® 기술 기반 3D 프린팅을 위해 설계된 Helios는 In-Vision의 새로운 독점 고전력 조명 모듈과 고성능 광학 부품을 결합했습니다. TI의 DLP9000을 기반으로 하는 Helios는 최대 12W의 출력 전력을 제공하며, 비용 효율적인 인화에 기여하고, 새로운 재료에 기반한 애플리케이션을 지원하고, 직렬 생산을 위한 적층 가공을 검증할 것입니다. 애플리케이션 분야: 3D 프린팅, 노광, 생물공학 및 기타 산업용 및 과학 애플리케이션.
INV-3P-HELIOS-DUO-TRIO — DLP9000 칩셋을 사용하는 In-Vision Helios Duo 및 Trio
Helios Duo 및 Helios Trio를 사용하면 365 ~ 405 나노미터에서 최대 3개의 다중 파장으로 작업할 수 있습니다. 고객은 2~162um의 픽셀 크기에 맞는 렌즈를 선택할 수 있는 구성 중에서 자유롭게 선택할 수 있습니다. 이 시스템은 완전 캡슐화된 광 경로로 수랭식으로 냉각됩니다. 견고한 설계로 먼지와 증기가 광학 시스템에 매우 강한 거친 생산 환경에도 대응할 수 있습니다. 애플리케이션 분야: 3D 프린팅, 노광, 생물공학 및 기타 산업용 및 과학 애플리케이션.
INV-3P-IKARUS — DLP6500용 In-Vision IKARUS 풀 HD II, 적층 가공 조명 엔진
In-Vision의 Ikarus II는 3D 프린팅 애플리케이션을 위해 파란색 파장 조명을 사용하는 조명 엔진 모듈 제품군 중 하나입니다. DLP6500 칩셋에 기반을 둔 Ikarus II는 광학 성능 저하 없이 비용 효율적인 솔루션을 제공합니다. 다양한 기성품 프로젝션 렌즈를 즉시 사용할 수 있습니다. 또한 In-Vision의 엔지니어링 및 제조 팀은 짧은 리드 타임에 특정 파장 또는 초점 비율을 위해 사용자 지정 렌즈 또는 조명 시스템 설계를 제공합니다. 애플리케이션 분야: 3D 프린팅, 노광, 생물공학 및 기타 산업용 및 (...)
INV-3P-MERCURY — In-Vision Mercury, DLP6500 기반 3D 계측 조명 엔진
Designed for 3D metrology, scanning and mapping applications, the Mercury light engine is based on TI’s DLP6500 chipset and projects patterns with a resolution of 1440x1080 pixels and an aspect ratio of 4:3. The optical system offers a high depth-of-field, low distortion as well as high MTF values.
INV-3P-PHOENIX — DLP670S 칩셋과 함께 연중무휴 24시간 사용할 수 있는 산업용 4K UV 프로젝터인 In-Vision Phoenix
In-Vision의 4K UV 프로젝터는 TI의 670S 칩셋과 In-Vision의 독점 픽셀 전환 기술 및 품질 광학 장치를 결합하여 산업용 애플리케이션의 요구 사항을 충족할 수 있는 고성능 4K UV DLP 프로젝터를 제공합니다. Phoenix는 LED의 전체 수명 동안 높은 수준의 안정적인 광도, 보다 효율적인 냉각 시스템(고정된 픽셀 없음)으로 DMD 성능 향상, 통합형 4-웨이 액추에이터 덕분에 최대 8K의 이미지를 제공하도록 설계되었습니다. 405nm 자외선 및 385nm용으로 설계되었습니다. 애플리케이션 분야: 3D (...)
OPTECKS-3P-RAY65 — DLP LightCrafter 6500용 Optecks RAY 65S, 광학 모듈
WDST-3P-PRO6500 — Wintech PRO6500 생산 준비가 된 광학 엔진
DLP-ALC-LIGHTCRAFTER-SDK — LightCrafter™ 시리즈 컨트롤러용 DLP® 고급 조명 제어 SDK
This DLP® Software Development Kit (SDK) supports the DLPC900 controller used in multiple DLP Advanced Light Control LightCrafter™ series evaluation modules. The SDK provides APIs to integrate DLP technology with cameras to create 3D machine vision or 3D printer solutions for a variety of (...)
OPTECKS-3P-LIGHT-ANIMATOR — DLP 고급 조명 제어 제품용 Optectks 조명 애니메이터 소프트웨어
DLPC900REF-SW — DLP® LightCrafter 6500 and 9000 Firmware and Software Bundle
텍사스 인스트루먼트는 개발자에게 DLP LightCrafter 6500 및 DLP LightCrafter 9000 EVM의 유연성과 고급 제어 기능을 제공하는 무료 소프트웨어와 펌웨어 다운로드를 제공합니다. 레퍼런스 설계 문서를 통해 고객은 DLP6500 및 DLP9000 칩셋 기반의 맞춤형 제품을 개발할 수 있습니다.
이 번들에는 다음 구성 요소가 포함되어 있습니다:
- DLPC900REF-GUI: 소프트웨어 번들에는 DLPC900 컨트롤러와 USB로 쉽게 통신할 수 있도록 PC 기반 그래픽 사용자 인터페이스(GUI)의 실행 파일이 (...)
DLPR900PROM — DLPC900 Configuration and Support Firmware
The DLPR900 configuration and support firmware enables broad functionality of the DLPC900 digital controller. The DLPC900 offers reliable operation of DLP670S, DLP6500FYE, DLP6500FLQ, and DLP9000 digital micromirror devices (DMDs). Combined with the DLPC900 controller, the DLPR900 firmware (...)
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
DLP-OMM-SEARCH — DLP® 제품 광학 모듈 검색 툴
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
DLI-3P-ACCESSORIES — DLP® 제품용 DLi 액세서리 및 어셈블리
- (...)
TIDA-00362 — DLP® 기술을 사용한 공장 자동화를 위한 고해상도 3D 스캐너
The Factory Automation reference design employs the Texas Instruments DLP® Advanced Light Control Software Development Kit (SDK) for LightCrafter™ series controllers, which allows developers to easily construct 3D point clouds by integrating TI’s digital micromirror device (DMD) technology (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| PBGA (ZPC) | 516 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.