TUSB3410
- Fully Compliant With USB 2.0 Full-Speed Specifications: TID#40340262
- Supports 12-Mbps USB Data Rate (Full Speed)
- Supports USB Suspend, Resume, and Remote Wake-Up Operations
- Configurable to Bus-Powered and Self-Powered Operation
- Supports a Total of Three Input and Three Output (Interrupt, Bulk) Endpoints
- Integrated 8052 Microcontroller With:
- 256 × 8 RAM for Internal Data
- 10K × 8 ROM (With USB and I2C Bootloader)
- 16K × 8 RAM for Code Space Loadable From Host or I2C Port
- 2K × 8 Shared RAM Used for Data Buffers and Endpoint Descriptor Blocks (EDBs)
- Master I2C Controller for EEPROM Device Access
- MCU Operates at 24 MHz, Providing 2-MIPS Operation
- 128-ms Watchdog Timer
- Enhanced UART Features:
- Software and Hardware Flow Control
- Automatic RS-485 Bus Transceiver Control, With and Without Echo
- Selectable IrDA Mode for Up to 115.2-kbps Transfer
- Software-Selectable Baud Rate From 50 BPS to 921.6 kbps
- Programmable Serial-Interface Characteristics
- 5-, 6-, 7-, or 8-Bit Characters
- Even, Odd, or No Parity-bit Generation and Detection
- 1-, 1.5-, or 2-Stop Bit Generation
- Line Break Generation and Detection
- Internal Test and Loopback Capabilities
- Modem Control Functions (CTS, RTS, DSR, RI and DCD)
- Internal Diagnostic Capability
- Loopback Control for Communications
Link-Fault Isolation - Break, Parity, Overrun, Framing-Error Simulation
- Loopback Control for Communications
The TUSB3410 device provides bridging between a USB port and an enhanced UART serial port. The device contains an 8052 microcontroller unit (MCU) with 16KB of RAM that can be loaded from the host or from the external onboard memory through an I2C. The device also contains 10KB of ROM that allows the MCU to configure the USB port at boot time. The ROM code also contains an I2C bootloader. All device functions (such as the USB command decoding, UART setup, and error reporting) are managed by the internal MCU firmware in unison with the PC host.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TUSB3410 USB to Serial Port Controller datasheet (Rev. J) | PDF | HTML | 2017/07/10 |
| * | Errata | TUSB3410 Errata. (Rev. B) | 2011/06/09 | |
| Application note | ESD and Surge Protection for USB Interfaces (Rev. B) | PDF | HTML | 2024/01/11 | |
| Technical article | 6 key questions when designing for USB protocol interfaces | PDF | HTML | 2020/07/31 | |
| User guide | TUSB3x10 EEPROM Burner | 2014/06/20 | ||
| White paper | Software Release Notes for TUSB3410 | 2013/07/12 | ||
| Application note | TUSBWINVCP Customization Guide | 2011/06/17 | ||
| Application note | USB/Serial Applications Using TUSB3410 VCP Software (Rev. F) | 2011/06/08 | ||
| Product overview | UART Quick Reference Card (Rev. D) | 2008/04/09 | ||
| Application note | TMS320F280x DSC USB Connectivity Using TUSB3410 USB-to-UART Bridge Chip | 2006/05/26 | ||
| EVM User's guide | TUSB3410UART EVM User's Guide (Rev. B) | 2006/01/26 | ||
| Application note | VIDs, PIDs, and Firmware: Design Decisions When Using TI USB Device Controllers | 2003/09/24 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DP149RSBEVM — DP149 3.4Gbps DP++ ~ HDMI 리타이머 평가 모듈
DP149RSBEVM은 고객이 비디오 애플리케이션용 DP149 장치를 평가할 수 있도록 만들어진 PCB입니다. 이 EVM은 RSB 패키지의 DP149 구현을 위한 하드웨어 레퍼런스 설계로도 사용할 수 있습니다. 라우팅/배치 규칙에 대한 PCB 설계 그림을 제공하도록 요청하면 PCB 설계/레이아웃 파일을 제공할 수 있습니다.
DP159RGZEVM — DP159RGZEVM 평가 모듈
The DP159RSBEVM is a PCB created to help customers evaluate the DP159 device for video applications. The EVM has a DP connection for the source and a HDMI connection for the sink. J2 is a standard DP connector (Molex 47272-0001). P2 is a standard HDMI connector (Molex (...)
DP159RSBEVM — DP159RSBEVM 평가 모듈
The DP159RSBEVM is a PCB created to help customers evaluate the DP159 device for video applications. The EVM has a DP connection for the source and a HDMI connection for the sink. J2 is a standard DP connector (Molex 47272-0001). P2 is a standard HDMI connector (Molex (...)
TDP158RSBEVM — TMDS & HDMI™ 리드라이버와 결합된 6Gbps AC 평가 모듈
TMDS171RGZEVM — TMDS171 RGZ 패키지의 3.4Gbps TMDS 리타이머 평가 모듈
TMDS171 EVM은 고객이 HDMI 인터페이스가 있는 비디오 애플리케이션용 TMDS171 장치를 평가할 수 있도록 만들어진 PCB입니다. 이 EVM은 RGZ 패키지의 TMDS171 구현을 위한 하드웨어 레퍼런스 설계로도 사용할 수 있습니다. TMDS171 또는 DP159 RGZ 부품을 사용한 라우팅/배치 규칙에 대한 PCB 설계 그림을 제공하도록 요청하면 PCB 설계/레이아웃 파일을 제공할 수 있습니다.
TMDS181RGZEVM — TMDS181 RGZ 패키지의 6Gbps TMDS 리타이머 평가 모듈
TUSB3410UARTPDK — TUSB3410UARTPDK 평가 모듈
The TUSB3410UARTPDK can be used to evaluate the TUSB3410 as a USB-to-serial converter (or bridge). The user is expected to be familiar with universal serial bus (USB) certification requirements. Go to www.usb.org for more information on USB and certification, logo and testing requirements.
An object (...)
USB-CTM-MINIDK-EVM — 비디오 및 충전을 지원하는 USB Type-C™ 미니 도크 보드 평가 모듈
USB Type-C™ 및 PD(Power Delivery) 미니 도크 EVM(평가 모듈)은 오디오, USB 데이터, 전력 및 비디오를 포함한 USB Type-C 도크를 위한 완전한 레퍼런스 솔루션을 제공합니다. EVM에는 소형 2인치 x 4인치 폼 팩터가 있으며 기본 USB Type-C PD 포트를 통해 소스 및 싱크 전원 기능을 모두 지원합니다. 비디오 출력 기능에는 DisplayPort 및 HDMI가 모두 포함됩니다.
SLLC428 — TUSB3410 Virtual COM Port Windows Driver
지원되는 제품 및 하드웨어
제품
USB 허브 및 컨트롤러
소프트웨어
소프트웨어 개발 키트(SDK)
드라이버 또는 라이브러리
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
TIDA-01243 — 비디오 및 충전 지원 USB Type-C™ 및 전원 공급 미니 도크 레퍼런스 디자인
TIDA-050001 — HDMI 2.0 ESD 보호 레퍼런스 설계
TIDM-G2XXSWRGBLED — 초저전력 마이크로컨트롤러의 소프트웨어 컨트롤러 빨간색/녹색/파란색 LED
TIDM-NFC-DESFIRE-AES — 근거리 무선 통신(NFC) MIFARE DESFire EV1 태그 인증 레퍼런스 디자인
TIDM-ORIENTATIONTRACKER — 저전력 오리엔테이션 추적기 레퍼런스 설계
TIDM-LPBP-CAPTOUCH — 저전력 정전식 터치 솔루션 기능 HMI(Human Machine Interface) 앱 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| LQFP (VF) | 32 | Ultra Librarian |
| VQFN (RHB) | 32 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.