計算工具
SBAR013 — Isolated Amplifier Voltage Sensing Excel Calculator
This calculator provides estimates of the errors associated with using isolation amplifier devices in a voltage sensing configuration.
AMC1400
- ±250-mV input voltage range optimized for current measurements using shunt resistors
- Fixed gain: 8.2 V/V
- Low DC errors:
- Offset error: ±0.2 mV (max)
- Offset drift: ±0.9 µV/°C (max)
- Gain error: ±0.3% (max)
- Gain drift: ±30 ppm/°C (max)
- Nonlinearity: 0.03% (max)
- 3.3-V or 5-V operation on high-side and low-side
- Missing high-side supply detection feature
- High CMTI: 100 kV/µs (min)
- Low EMI, meets CISPR-11 and CISPR-32 standards
- ≥15.7-mm creepage, stretched SOIC package
- Safety-related certifications:
- 10600-VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 7500-VRMS isolation for 1 minute per UL1577
- Fully specified over the extended industrial temperature range: –40°C to +125°C
The AMC1400 is a precision, isolated amplifier with an output separated from the input circuitry by an isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced galvanic isolation of up to 7.5 kVRMS according to DIN EN IEC 60747-17 (VDE 0884-17) and UL1577, and supports a working voltage of up to 2 kVRMS.
The isolation barrier separates parts of the system that operate on different common-mode voltage levels and protects the low-side from voltage levels that can cause electrical damage and are potentially harmful to an operator.
The input of the AMC1400 is optimized for direct connection to a low-impedance shunt resistor or other low-impedance voltage source with low signal levels. The excellent DC accuracy and low temperature drift supports accurate current control in DC/DC converters, frequency inverters, AC motor drives, and other applications that must operate at high voltages, high altitudes, or in environments with high pollution degrees.
The AMC1400 is offered in a stretched SOIC package and is specified over the extended industrial temperature range from –40°C to +125°C .
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | AMC1400 Precision, ±250-mV Input, Reinforced Isolated Amplifierin a 15-mm Stretched SOIC Package datasheet | PDF | HTML | 2022年 7月 25日 |
| Application brief | Shunt Resistor Selection for Isolated Data Converters | PDF | HTML | 2023年 5月 4日 | |
| Certificate | AMC1400EVM EU RoHS Declaration of Conformity (DoC) | 2022年 9月 20日 | ||
| Circuit design | Isolated Current-Sensing Circuit W/ ±250-mV Input Range & Single-Ended Output | PDF | HTML | 2022年 6月 27日 | |
| Certificate | UL Certificate of Compliance Vol4 Sec13 - E181974 | 2022年 5月 20日 | ||
| Application brief | TI's First Isolated Amplifiers With Ultra-Wide Creepage and Clearance | PDF | HTML | 2021年 8月 13日 | |
| Circuit design | Isolated current-measurement circuit with ±250-mV input and differential output | 2020年 7月 23日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
AMC1400EVM — 適用於 ±250-mV 輸入、精密電壓感測隔離放大器的 AMC1400 評估模組
AMC1400 評估模組 (EVM) 是用於開發 AMC1400 的平台，是一款精密隔離放大器，輸入範圍為 ±250-mV，輸出與輸入電路透過高度電阻的二氧化矽 (SiO2) 絕緣層阻絕磁場干擾來進行隔開。AMC1400 10600-VPK 強化隔離專為雙極電流測量應用而設計。
計算工具
SBAR020 — Isolated Amplifier Current Sensing Excel Calculator
This calculator provides estimates of the errors associated with using isolation amplifier devices in a current sensing configuration.
支援產品和硬體
產品
隔離式放大器
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (DWL) | 8 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。