DCH010505S
- 3-kVDC Isolation (operational): 1-second test
- Continuous voltage applied across isolation barrier: 60 VDC / 42.5 VAC
- UL60950 certified product
- Industry standard footprint
- JEDEC 7-pin SIP package
- Input voltage: 5 V ±10%
- Output voltage: ±5 V, ±12 V, or ±15 V
- Supports series operation for higher output voltage
- Supports parallel operation for higher output power
- Up to 78% efficiency
The DCH010505, DCH010512, and DCH010515 devices are a family of miniature, 1-W, 3-kV isolated DC/DC converters. Featured in an industry standard 7-pin SIP package, the DCH01 series requires minimal external components, reducing board space. The DCH01 series provides both single and dual split-supply outputs.
The use of a highly integrated package design results in highly reliable products with high power densities. High performance and small size makes the DCH01 suitable for a wide range of applications including signal chain applications and ground loop elimination.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | Miniature, 1W, 3kV Isolated, Unregulated DC/DC Converters datasheet (Rev. J) | 2020年 4月 22日 | |
| Technical article | Pile on to a charger – my EV needs power | PDF | HTML | 2016年 12月 20日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TIEVM-VIENNARECT — 使用 C2000™ MCU 且基於 Vienna 整流器的三相功率因數校正評估模組
The Vienna rectifier power topology is used in high power three phase power factor (AC-DC) applications such as off-board electric vehicle (EV) chargers and telecom rectifiers. This design illustrates how to control the power stage using C2000™ MCUs. This design uses an HSEC180 controlCARD (...)
開發套件
TIEVM-HV-1PH-DCAC — 具有電壓源和併聯模式的單相逆變器開發套件
This reference design implements single phase inverter (DC-AC) control using the C2000™ F2837xD and F28004x microcontrollers. Design supports two modes of operation for the inverter. First is voltage source mode using an output LC filter, this control mode is typically used in Uninterrupted (...)
參考設計
TIDM-1000 — 採用 C2000 MCU 的 Vienna 整流器式三相功率因數校正參考設計
Vienna rectifier power topology is used in high power three phase power factor (AC-DC) applications such as off board EV chargers and telecom rectifiers. Control design of the rectifier can be complex. This design illustrates a method to control the power stage using C2000™ microcontrollers (...)
參考設計
TIDM-HV-1PH-DCAC — 具有電壓來源和併聯模式的單相逆變器參考設計
此參考設計使用 C2000™ F2837xD 和 F28004x 微控制器，實作單相逆變器 (DC-AC) 控制。設計支援逆變器的兩種操作模式。第一個是使用輸出 LC 濾波器的電壓來源模式。此控制模式通常用於不斷電電源供應器 (UPS)。第二個則是搭載輸出 LCL 濾波器的併聯模式，通常用於太陽能逆變器。powerSUITE 架構支援適用於設計的韌體，可利用 Solution Adapter 進行修改，並利用 Compensation Designer 和 SFRA 調整控制迴路。高效率，低 THD 和直覺式軟體，讓此設計對於從事 UPS 逆變器設計以及 PV (...)
參考設計
TIDM-02000 — 使用 C2000™ 即時 MCU 的尖峰電流模式控制相移式全橋參考設計
This design implements a digitally peak current mode controlled (PCMC) phase shifted full bridge (PSFB) DC-DC converter which converts a 400-V DC input to a regulated 12-V DC output. Novel PCMC waveform generation based on type-4 PWM and internal slope compensation, and simple PCMC implementation (...)
參考設計
TIDM-BIDIR-400-12 — 雙向 400-V/12-V DC/DC 轉換器參考設計
The Bidirectional 400V-12V DC/DC Converter Reference Design is a microcontroller-based implementation of an isolated bi-directional DC-DC converter. A phase shifted full-bridge (PSFB) with synchronous rectification controls power flow from a 400V bus/battery to the 12V battery in step-down (...)
參考設計
TIDM-RM46XDRV8301KIT — 具有高效能微控制器的三相 BLDC / PMSM 馬達驅動參考設計
This reference design describes a motor-control evaluation kit for spinning 3-phase brushless DC and brushless AC (BLAC) often referred to as permanent-magnet synchronous (PMSM) motors with example of sensorless field oriented / vector control (FOC). The implementation leverages the DRV8301 (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SIPMODULE (EDJ) | 4 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點