首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)
首頁
電源管理
AC/DC 和 DC/DC 轉換器 (整合式 FET)

LMQ61460

現行

工業 3-V 至 36-V、6-V、低雜訊同步降壓轉換器

立即訂購
產品規格表

LMQ61460

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 34 Vout (min) (V) 1 Features Enable, Fixed soft start, Forced PWM, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Prebias startup, Spread Spectrum, Synchronous rectification, Tracking, UVLO adjustable, Wettable flanks package Control mode current mode Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 7 Duty cycle (max) (%) 98 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 34 Vout (min) (V) 1 Features Enable, Fixed soft start, Forced PWM, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Prebias startup, Spread Spectrum, Synchronous rectification, Tracking, UVLO adjustable, Wettable flanks package Control mode current mode Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 7 Duty cycle (max) (%) 98 Type Converter
VQFN-HR (RJR) 14 14 mm² 4 x 3.5
  • Functional Safety-Capable
  • ZEN 2 switcher
    • HotRod™ package minimizes switch node ringing
    • Internal bypass capacitors reduce EMI
    • Parallel input path minimizes parasitic inductance
    • Spread spectrum reduces peak emissions
    • Adjustable switch node rise time
  • Designed for rugged applications
    • Supports 42V transient
    • 0.4V dropout with 4A load (typical)
  • High efficiency power conversion at all loads
    • 7µA no load current at 13.5 VIN, 3.3 VOUT
    • 90% PFM efficiency at 1mA, 13.5 VIN, 5 VOUT
    • Low MOSFET ON resistance
      • RDS_ON_HS = 41mΩ (typical)
      • RDS_ON_LS = 21mΩ (typical)
  • External bias option for improved efficiency
  • Pin compatible with:
  • Use TPSM63606 module for faster time to market
  • Functional Safety-Capable
  • ZEN 2 switcher
    • HotRod™ package minimizes switch node ringing
    • Internal bypass capacitors reduce EMI
    • Parallel input path minimizes parasitic inductance
    • Spread spectrum reduces peak emissions
    • Adjustable switch node rise time
  • Designed for rugged applications
    • Supports 42V transient
    • 0.4V dropout with 4A load (typical)
  • High efficiency power conversion at all loads
    • 7µA no load current at 13.5 VIN, 3.3 VOUT
    • 90% PFM efficiency at 1mA, 13.5 VIN, 5 VOUT
    • Low MOSFET ON resistance
      • RDS_ON_HS = 41mΩ (typical)
      • RDS_ON_LS = 21mΩ (typical)
  • External bias option for improved efficiency
  • Pin compatible with:
  • Use TPSM63606 module for faster time to market

The LMQ61460 is a high-performance, DC-DC synchronous buck converter with integrated bypass capacitors. With integrated high-side and low-side MOSFETs, up to 6A of output current is delivered over a wide input range of 3.0V to 36V; tolerant of 42V, easing input surge protection design. The device implements soft recovery from dropout eliminating overshoot on the output.

LMQ61460 with ZEN 2 switcher technology is specifically designed for minimal EMI. The device incorporates pseudo-random spread spectrum, integrated bypass capacitors, adjustable SW node rise time, low-EMI VQFN-HR package featuring low switch node ringing, and optimized pinout for ease of use. The switching frequency can be synchronized between 200kHz and 2.2MHz to avoid noise sensitive frequency bands. In addition, the frequency can be selected for improved efficiency at low operating frequency or smaller design size at high operating frequency.

Auto mode enables frequency foldback when operating at light loads, allowing an unloaded current consumption of only 7µA (typical) and high light load efficiency. Seamless transition between PWM and PFM modes, along with very low MOSFET ON resistances and an external bias input, makes sure of exceptional efficiency across the entire load range.

The LMQ61460 is a high-performance, DC-DC synchronous buck converter with integrated bypass capacitors. With integrated high-side and low-side MOSFETs, up to 6A of output current is delivered over a wide input range of 3.0V to 36V; tolerant of 42V, easing input surge protection design. The device implements soft recovery from dropout eliminating overshoot on the output.

LMQ61460 with ZEN 2 switcher technology is specifically designed for minimal EMI. The device incorporates pseudo-random spread spectrum, integrated bypass capacitors, adjustable SW node rise time, low-EMI VQFN-HR package featuring low switch node ringing, and optimized pinout for ease of use. The switching frequency can be synchronized between 200kHz and 2.2MHz to avoid noise sensitive frequency bands. In addition, the frequency can be selected for improved efficiency at low operating frequency or smaller design size at high operating frequency.

Auto mode enables frequency foldback when operating at light loads, allowing an unloaded current consumption of only 7µA (typical) and high light load efficiency. Seamless transition between PWM and PFM modes, along with very low MOSFET ON resistances and an external bias input, makes sure of exceptional efficiency across the entire load range.
filter 尋找其它 AC/DC 和 DC/DC 轉換器 (整合式 FET)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet LMQ61460 3V to 36V, 6A , Synchronous ZEN 2 Step-Down Converter datasheet (Rev. E) PDF | HTML 2025年 10月 30日
Application note How to Implement a Simple Constant Current Regulation Scheme to a PCM Based Buck PDF | HTML 2023年 8月 16日
Technical article How buck regulators with integrated capacitors help lower EMI and save board space PDF | HTML 2022年 3月 16日
Technical article Powering medical imaging applications with DC/DC buck converters PDF | HTML 2020年 11月 24日
Functional safety information LMQ6x4x0-Q1 Functional Safety, FIT Rate, FMD, and Pin FMA (Rev. A) PDF | HTML 2020年 9月 9日
Certificate LMQ61460EVM-400K EU Declaration of Conformity (DoC) 2020年 9月 1日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMQ61460EVM — 36-V、低 EMI 6-A、5-V 同步、400 kHz、降壓轉換器評估模組

LMQ61460EVM 評估模組 (EVM) 是完全組裝且經過測試的電路，用於評估 LMQ61460-Q1 同步降壓轉換器。  LMQ61460-Q1 採用搭載整合式電容器的小型解決方案，從而提供絕佳效率、低 IQ 與低 EMI。
使用指南: PDF | HTML
TI.com 無法提供
設計工具

SNVR488 — LMQ61460EVM-400K Design Files

支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 轉換器 (整合式 FET)
LMQ61460 — 工業 3-V 至 36-V、6-V、低雜訊同步降壓轉換器 LMQ61460-Q1 — 具有整合式電容器的車用 3-V 至 36-V、6-V 低 EMI 同步降壓安靜轉換器
硬體開發
開發板
LMQ61460EVM — 36-V、低 EMI 6-A、5-V 同步、400 kHz、降壓轉換器評估模組
下載
設計工具

SNVR493 — LMQ61460 Design Tool

支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 轉換器 (整合式 FET)
LMQ61460 — 工業 3-V 至 36-V、6-V、低雜訊同步降壓轉換器 LMQ61460-Q1 — 具有整合式電容器的車用 3-V 至 36-V、6-V 低 EMI 同步降壓安靜轉換器
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RJR) 14 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片