首頁 介面 RS-485 & RS-422 收發器
首頁
介面
RS-485 & RS-422 收發器

SN65LBC174A-EP

現行

強化型產品四路 RS-485/RS-422 差動線路驅動器

立即訂購
產品規格表

SN65LBC174A-EP

現行
產品規格表 立即訂購

產品詳細資料

Number of receivers 0 Number of transmitters 4 Supply voltage (nom) (V) 5 Signaling rate (max) (Mbps) 30 Fault protection (V) -10 to 15 Common-mode range (V) -7 to 12 Number of nodes 32 Isolated No Supply current (max) (µA) 23000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
Number of receivers 0 Number of transmitters 4 Supply voltage (nom) (V) 5 Signaling rate (max) (Mbps) 30 Fault protection (V) -10 to 15 Common-mode range (V) -7 to 12 Number of nodes 32 Isolated No Supply current (max) (µA) 23000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
SOIC (DW) 16 106.09 mm² 10.3 x 10.3 SOIC (DW) 20 131.84 mm² 12.8 x 10.3
  • VID V62/07611
  • Designed for TIA/EIA-485, TIA/EIA-422, and ISO 8482 applications
  • Signaling rates up to 30 Mbps (1)
  • Propagation delay times < 11 ns
  • Low standby power consumption 1.5-mA max
  • Driver positive- and negative-current limiting
  • Power-up and power-down glitch free for line-insertion applications
  • Thermal shutdown protection
  • Industry standard pinout, compatible with SN75174, MC3487, DS96174, LTC487, and MAX3042
  • Supports defense, aerospace, and medical applications
    • Controlled baseline
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability

(1)The signaling rate of a line is the number of voltage transitions that are made per second, expressed in the unit bits per second (bps).
  • VID V62/07611
  • Designed for TIA/EIA-485, TIA/EIA-422, and ISO 8482 applications
  • Signaling rates up to 30 Mbps (1)
  • Propagation delay times < 11 ns
  • Low standby power consumption 1.5-mA max
  • Driver positive- and negative-current limiting
  • Power-up and power-down glitch free for line-insertion applications
  • Thermal shutdown protection
  • Industry standard pinout, compatible with SN75174, MC3487, DS96174, LTC487, and MAX3042
  • Supports defense, aerospace, and medical applications
    • Controlled baseline
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability

(1)The signaling rate of a line is the number of voltage transitions that are made per second, expressed in the unit bits per second (bps).

The SN65LBC174A-EP is a quadruple differential line driver with tri-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 applications.

This device is optimized for balanced multipoint bus transmission at signaling rates up to 30-million bits per second (Mbps). The transmission media may be printed-circuit-board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Each driver features current limiting and thermal-shutdown circuitry, making it suitable for high-speed multipoint applications in noisy environments. The device is designed using LinBiCMOS™ technology, facilitating low power consumption and robustness.

The two enable (EN) inputs provide pair-wise driver enabling, or can be externally tied together to provide enable control of all four drivers with one signal. When disabled or powered off, the driver outputs present a high impedance to the bus for reduced system loading.

The SN65LBC174A-EP is characterized for operation over the temperature range of –55°C to 125°C.

The SN65LBC174A-EP is a quadruple differential line driver with tri-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 applications.

This device is optimized for balanced multipoint bus transmission at signaling rates up to 30-million bits per second (Mbps). The transmission media may be printed-circuit-board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Each driver features current limiting and thermal-shutdown circuitry, making it suitable for high-speed multipoint applications in noisy environments. The device is designed using LinBiCMOS™ technology, facilitating low power consumption and robustness.

The two enable (EN) inputs provide pair-wise driver enabling, or can be externally tied together to provide enable control of all four drivers with one signal. When disabled or powered off, the driver outputs present a high impedance to the bus for reduced system loading.

The SN65LBC174A-EP is characterized for operation over the temperature range of –55°C to 125°C.
filter 尋找其它 RS-485 & RS-422 收發器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
SN75174 現行 四路差分線路驅動器 Catalog version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet SN65LBC174A-EP Quadruple RS-485 Differential Line Driver datasheet (Rev. A) PDF | HTML 2019年 11月 18日
* VID SN65LBC174A-EP VID V6207611 2016年 6月 21日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (DW) 16 Ultra Librarian
SOIC (DW) 20 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片