首頁 電源管理 LED 驅動器 RGB LED 驅動器

TLC6A598

現行

適合航空電子應用的高功率 8 位元相移高可靠性驅動器

產品詳細資料

Number of channels 8 LED current per channel (mA) 350 LED configuration Parallel Program memory No Vin (min) (V) 3 Vin (max) (V) 5.5 Features Enable/Shutdown, LED Shorted Detection, LED open detection, Thermal shutdown Shutdown current (ISD) (typ) (µA) 300 Operating temperature range (°C) -55 to 125 Rating Catalog
Number of channels 8 LED current per channel (mA) 350 LED configuration Parallel Program memory No Vin (min) (V) 3 Vin (max) (V) 5.5 Features Enable/Shutdown, LED Shorted Detection, LED open detection, Thermal shutdown Shutdown current (ISD) (typ) (µA) 300 Operating temperature range (°C) -55 to 125 Rating Catalog
SOIC (DW) 24 159.65 mm² 15.5 x 10.3
  • High reliability and robustness for avionics application
  • Wide operating ambient temperature: –55ºC to +125ºC
  • Wide VCC from 3 V to 5.5 V
  • Eight power DMOS transistor output channels
    • 350-mA continuous current
    • 1.1-A current limit capability
    • Output clamp voltage, 50 V
    • Low Rds(on), 1 Ω (typical)
    • Avalance energy, 90 mJ (maximum)
  • Protection
    • Overcurrent protection
    • Open and short load detection
    • Serial-interface communication-error detection
    • Thermal shutdown protection
  • Enhanced cascading for multiple stages
  • All registers cleared with single input
  • Cyclic redundancy check (CRC)
  • Low power consumption
  • 24-pin SOIC DW package
  • High reliability and robustness for avionics application
  • Wide operating ambient temperature: –55ºC to +125ºC
  • Wide VCC from 3 V to 5.5 V
  • Eight power DMOS transistor output channels
    • 350-mA continuous current
    • 1.1-A current limit capability
    • Output clamp voltage, 50 V
    • Low Rds(on), 1 Ω (typical)
    • Avalance energy, 90 mJ (maximum)
  • Protection
    • Overcurrent protection
    • Open and short load detection
    • Serial-interface communication-error detection
    • Thermal shutdown protection
  • Enhanced cascading for multiple stages
  • All registers cleared with single input
  • Cyclic redundancy check (CRC)
  • Low power consumption
  • 24-pin SOIC DW package

The TLC6A598 device is a monolithic, high-voltage, high-current power 8-bit shift register designed for use in systems that require relatively high load power, such as LEDs.

The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power driver applications include relays, solenoids, and other high-current or high-voltage loads. Each open-drain DMOS transistor features an independent chopping current-limiting circuit to prevent damage in the case of a short circuit.

This device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Outputs are low-side, open-drain DMOS transistors with output ratings of 50 V and 350-mA continuous sink-current capabilities. A built-in load open or load short diagnostic mechanism provides enhanced safety protection. The device provides a cycle redundancy check to verify register values in the shift registers. In read-back mode, the device provides 6 bits of the CRC remainder. The MCU can read back the CRC remainder and check if the remainder is correct to determine whether the communication loop between MCU and device is good.

The TLC6A598 characterization is for operation over the operating ambient temperature range of −55°C to 125°C.

The TLC6A598 device is a monolithic, high-voltage, high-current power 8-bit shift register designed for use in systems that require relatively high load power, such as LEDs.

The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power driver applications include relays, solenoids, and other high-current or high-voltage loads. Each open-drain DMOS transistor features an independent chopping current-limiting circuit to prevent damage in the case of a short circuit.

This device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Outputs are low-side, open-drain DMOS transistors with output ratings of 50 V and 350-mA continuous sink-current capabilities. A built-in load open or load short diagnostic mechanism provides enhanced safety protection. The device provides a cycle redundancy check to verify register values in the shift registers. In read-back mode, the device provides 6 bits of the CRC remainder. The MCU can read back the CRC remainder and check if the remainder is correct to determine whether the communication loop between MCU and device is good.

The TLC6A598 characterization is for operation over the operating ambient temperature range of −55°C to 125°C.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TLC6A598 Power Logic 8-Bit Shift Register datasheet (Rev. C) PDF | HTML 2022年 3月 23日
EVM User's guide TLC6A598 Power Logic 8-Bit Shift Register Evaluation Module PDF | HTML 2021年 6月 25日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TLC6A598EVM — 適用於電源邏輯 8 位元移位暫存器的 TLC6A598 評估模組

TLC6A598EVM 可協助您評估德州儀器 TLC6A598 功率邏輯 8 位元移位暫存器的功能。TLC6A598EVM 提供八通道繼電器控制範例解決方案。

使用指南: PDF | HTML
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 引腳 下載
SOIC (DW) 24 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片