TLV803
- 3-Pin SOT23 Package
- Supply Current: 9 µA (Typical)
- Precision Supply Voltage Monitor: 2.5 V, 3 V, 3.3 V, 5 V
- Power-On Reset Generator with Fixed Delay Time of 200 ms
- Pin-for-Pin Compatible with MAX803
- Temperature Range: –40°C to +125°C
- Open-Drain, RESET Output
The TLV8x3 family of supervisory circuits provides circuit initialization and timing supervision, primarily for DSPs and processor-based systems.
The TLV803, TLV853, and TLV863 are functionally equivalent. The TLV853 and TLV863 provide an alternate pinout of the TLV803. The newer TLV803E device is a pin-to-pin alternative to all of these 3.
During power on, RESET asserts when the supply voltage (VDD) exceeds 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time (td(typ) = 200 ms) starts after VDD exceeds the threshold voltage, VIT. When the supply voltage drops below the VIT threshold voltage, the output is active (low) again. All the devices in this family have a fixed sense-threshold voltage (VIT) set by an internal voltage divider.
The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. These devices are available in a 3-pin SOT-23 package. The TLV803 devices are characterized for operation over a temperature range of –40°C to +125°C.
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS114S08EVM — ADS114S08 評估模組
ADS114S08 評估模組 (EVM) 是用於評估 ADS114S08 類比轉數位轉換器 (ADC) 的平台。ADS114S08 為 16 位元、4kSPS、12 通道、低功耗 ΔΣ ADC，適用於感測器量測和製程控制應用。ADS114S08 還內建高精確度振盪器與卓越的整合式參考電壓漂移性能，能實現多種輸入訊號的精準量測。使用 ADS114S08EVM 和 ΔΣ ADC EvaluaTIon 軟體 (DELTASIGMAEVAL-GUI) 以縮短原型開發時間，加快產品上市速度。
ADS122C04EVM — ADS122C04 評估模組
ADS122C04 評估模組 (EVM) 是用於評估 ADS122C04 類比轉數位轉換器 (ADC) 的平台。ADS122C04 為一配備 I2C 介面的 24 位元，2kSPS，4 通道，低功耗 ΔΣ ADC，適用於感測器量測和製程控制應用。ADS122C04 也包括整合式振盪器、參考及使用 PGA 精準測量廣泛的輸入訊號。使用 ADS122C04EVM 和 ΔΣ ADC EvaluaTIon 軟體 (DELTASIGMAEVAL-GUI) 以縮短原型開發時間，加快產品上市速度。
TLV803M Unencrypted PSpice Transient Model Package (Rev. A)
TLV803R Unencrypted PSpice Transient Model Package (Rev. A)
TLV803S Unencrypted PSpice Transient Model Package (Rev. A)
TLV803Z Unencrypted PSpice Transient Model Package (Rev. A)
Driving Stepper Motor with High Performance MCU Assembly Drawing (from DRV8833)
Driving a Stepper Motor with High Performance MCU CAD Files (from DRV8833)
Driving a Stepper Motor with High Performance MCU CAD FIles (from EK-TM4C123GXL)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
TIDA-00447 — 24V、100W/30W 雙無感測器無刷 DC 馬達驅動參考設計
TIDA-01568 — 用於應用處理器的 12 mm x 12 mm 5 軌電源定序參考設計
TIDEP0020 — AM437x 分離式電源參考設計
TIDM-TM4C123XSUB1GHZ — 高效能微控制器上支援低於 1 GHz 技術的物聯網節點參考設計
TIDM-TM4C123STEPPERMOTOR — 採用高效能 MCU 驅動步進性能的參考設計
TIDA-00641 — 雙高解析度微型步進驅動器參考設計
TIDEP0038 — 視覺分析 OMAPL-138 架構硬體/軟體參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點