TPS54320
- Integrated 57-mΩ / 50-mΩ MOSFETs
- Split Power Rail: 1.6 to 17 V on PVIN
- 200-kHz to 1.2-MHz Switching Frequency
- Synchronizes to External Clock
- 0.8-V Voltage Reference With ±1% Accuracy
- Low 2-µA Shutdown Quiescent Current
- Hiccup Overcurrent Protection
- Monotonic Start-Up into Prebiased Outputs
- –40°C to 150°C Operating Junction Temperature Range
- Pin-to-Pin Compatible With the TPS54620
- Adjustable Slow Start/Power Sequencing
- Power Good Output for Undervoltage and Overvoltage Monitoring
- Adjustable Input Undervoltage Lockout (UVLO)
- Supported by SwitcherPro™ Software Tool
- For SWIFT™ Documentation and SwitcherPro, Visit www.ti.com/swift
- Create a Custom Design Using the TPS54320 With the WEBENCH® Power Designer
The TPS54320 is a full-featured 17-V, 3-A synchronous step-down converter which is optimized for small designs through high efficiency and integrated high-side and low-side MOSFETs. Further space savings are achieved through current mode control, which reduces component count, and by selecting a high switching frequency, reducing footprint of the inductor.
The output voltage start-up ramp is controlled by the SS/TR pin which allows operation as either a stand-alone power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and the open drain power good pins.
Cycle by cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. Hiccup protection is triggered if the overcurrent condition has persisted for longer than the preset time. Thermal shutdown disables the part when die temperature exceeds thermal shutdown temperature. The TPS54320 is available in a 14-pin, 3.5-mm × 3.5-mm VQFN, thermally enhanced package.
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS54320EVM-513 — 用於 TPS54320 4.5V 至 17V 輸入、3A 同步降壓 SWIFT™ 轉換器的評估模組
The TPS54320EVM-513 is a fully assembled and tested circuit for evaluating the TPS54320 synchronous step-down SWIFT™ converter. The EVM converts a 8-V to 17-V input voltage to a regulated 3.3-V output voltage that delivers up to 3 A. The switching frequency is externally set at a nominal (...)
SLVC439 — Synchronous Inverting Buck Boost Design Calculator
TPS54620DESIGN-CALC — TPS54620 and TPS54XXX Current-Mode Step-Down Converter Design Calculator
TIDEP0011 — 具有動態電壓調節的 C667x DSP AVS 核心 (CVDD) 電源解決方案
此參考設計旨在為 Keystone 多核 DSP（主要是 C66x 系列）中的 AVS 內核電源 (CVDD) 供電。C66x 系列使用 SmartReflex 技術使 DSP 能夠控制其電源電壓。為了滿足此要求，此設計將同步降壓轉換器 (TPS56121) 與 POL 的電壓編程器 (LM10011) 結合在一起。LM10011 可以接受來自 DSP 的 6 位元或 4 位元 VCNTL，並將 TPS56121 的輸出電壓變更為 DSP 所需的電壓。LM10011 具有高準確度 (1.0%)，可在其餘電源供應元件和配電中增加額外的系統裕度。對於需要特定初始啟動電壓的處理器，LM10011 (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RHL) | 14 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。