首頁 電源管理 DC/DC 電源模組 電源模組 (整合式電感器)

TPSM843320

現行

4-V 至 18-V 輸入、進階電流模式、3-A 同步 SWIFT™ 降壓電源模組

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 18 Vin (min) (V) 4 Vout (max) (V) 5.5 Vout (min) (V) 0.5 Features Adjustable current limit, Adjustable soft start, Enable, Forced PWM, Frequency synchronization, Overcurrent protection, Power good, Pre-bias startup, Synchronous rectification, UVLO adjustable EMI features Low parasitic Hotrod packaging Operating temperature range (°C) -40 to 125 Type Module Duty cycle (max) (%) 94 Control mode ACM/AECM Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 2200
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 18 Vin (min) (V) 4 Vout (max) (V) 5.5 Vout (min) (V) 0.5 Features Adjustable current limit, Adjustable soft start, Enable, Forced PWM, Frequency synchronization, Overcurrent protection, Power good, Pre-bias startup, Synchronous rectification, UVLO adjustable EMI features Low parasitic Hotrod packaging Operating temperature range (°C) -40 to 125 Type Module Duty cycle (max) (%) 94 Control mode ACM/AECM Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 2200
uSIP (SIT) 15 12.25 mm² 3.5 x 3.5
  • Fixed-frequency, internally-compensated Advanced Current Mode (ACM) control
  • Small form factor 3.5mm × 3.5mm × 1.6mm, 15-pin DFM package MicroSiP™ power module
  • High-efficiency, integrated 25mΩ and 6.5mΩ MOSFETs, inductor and basic passives
  • 4V to 18V input voltage range
  • 0.5V to 5.5V output voltage range
  • Three selectable PWM ramp options to optimize the control loop performance
  • Five selectable switching frequencies: 500kHz, 750kHz, 1MHz, 1.5MHz, and 2.2MHz
  • Synchronizable to an external clock
  • 0.5V, ±0.5% voltage reference accuracy over full temperature range
  • Selectable soft-start times: 0.5ms, 1ms, 2ms, and 4ms
  • Monotonic start-up into prebiased outputs
  • Selectable current limits to support lower current operation
  • Enable with adjustable input undervoltage lockout
  • Power-good output monitor
  • Output overvoltage, output undervoltage, input undervoltage, overcurrent, and overtemperature protection
  • Pin-to-pin compatible with 8A - TPSM843820, 6A - TPSM843620
  • – 40°C to 125°C operating junction temperature
  • Fixed-frequency, internally-compensated Advanced Current Mode (ACM) control
  • Small form factor 3.5mm × 3.5mm × 1.6mm, 15-pin DFM package MicroSiP™ power module
  • High-efficiency, integrated 25mΩ and 6.5mΩ MOSFETs, inductor and basic passives
  • 4V to 18V input voltage range
  • 0.5V to 5.5V output voltage range
  • Three selectable PWM ramp options to optimize the control loop performance
  • Five selectable switching frequencies: 500kHz, 750kHz, 1MHz, 1.5MHz, and 2.2MHz
  • Synchronizable to an external clock
  • 0.5V, ±0.5% voltage reference accuracy over full temperature range
  • Selectable soft-start times: 0.5ms, 1ms, 2ms, and 4ms
  • Monotonic start-up into prebiased outputs
  • Selectable current limits to support lower current operation
  • Enable with adjustable input undervoltage lockout
  • Power-good output monitor
  • Output overvoltage, output undervoltage, input undervoltage, overcurrent, and overtemperature protection
  • Pin-to-pin compatible with 8A - TPSM843820, 6A - TPSM843620
  • – 40°C to 125°C operating junction temperature

TPSM843320 is a highly efficient, small, and flexible synchronous step-down DC-DC converter in a MicroSiP power module package that is easy to use. The module operates up to 18V input with fixed-frequencies that are resistor adjustable by system designer. The embedded IC is internally compensated which reduces external components and design size. The integrated high-frequency capacitor reduces the transient peak at switching node.

The TPSM843320 module employs an internally compensated, fixed-frequency advanced current mode control. The device is capable of providing high efficiency while running at a switching frequency up to 2.2MHz. The fixed frequency controller can operate from 500kHz to 2.2MHz and can be synchronized to an external clock using the SYNC pin. Additional features include a high accuracy voltage reference, selectable soft-start times, monotonic start-up into prebiased outputs, selectable current limits, adjustable UVLO through the EN pin, and a full suite of fault protections.

TPSM843320 is a highly efficient, small, and flexible synchronous step-down DC-DC converter in a MicroSiP power module package that is easy to use. The module operates up to 18V input with fixed-frequencies that are resistor adjustable by system designer. The embedded IC is internally compensated which reduces external components and design size. The integrated high-frequency capacitor reduces the transient peak at switching node.

The TPSM843320 module employs an internally compensated, fixed-frequency advanced current mode control. The device is capable of providing high efficiency while running at a switching frequency up to 2.2MHz. The fixed frequency controller can operate from 500kHz to 2.2MHz and can be synchronized to an external clock using the SYNC pin. Additional features include a high accuracy voltage reference, selectable soft-start times, monotonic start-up into prebiased outputs, selectable current limits, adjustable UVLO through the EN pin, and a full suite of fault protections.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TPSM843320E 現行 具有擴展溫度的 4V 至 18V 輸入、3A 同步 SWIFT™ 降壓電源模組 Same part with extended temperature.
TPSM843820 現行 4-V 至 18-V 輸入、進階電流模式、8-A 同步 SWIFT™ 降壓電源模組 Optimized for higher current in same form factor
功能與所比較的裝置相似
TPSM843620 現行 4-V 至 18-V 輸入、進階電流模式、6-A 同步 SWIFT™ 降壓電源模組 Optimized for higher current in same form factor

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TPSM843320 4V to 18V Input, 3A Synchronous SWIFT Step-Down Converter MicroSiP Power Module With Integrated Inductor and Internally Compensated Advanced Current Mode Control datasheet (Rev. A) PDF | HTML 2023年 12月 1日
Application brief Solving Power Design Challenges in Semiconductor Test and ATE Applications PDF | HTML 2024年 8月 2日
Application note Detailed Comparison Between TPSM843620 Family and TPS543620 Family PDF | HTML 2023年 11月 20日
Application brief Solving power design challenges in oscilloscope applications PDF | HTML 2023年 10月 31日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPSM843620EVM — 適用於同步降壓轉換器的 TPSM843620 評估模組

TPSM843620 評估模組 (EVM) 是一款同步降壓電源模組,可提供高達 6A 的輸出,額定電壓為 4V 至 18V。TPSM843620 封裝內部採用高側和低側 MOSFET 以及閘極驅動電路、電感器和基本被動元件。MOSFET 的低汲極至源極導通電阻使 TPSM843620 能夠實現高效率,並有助於在額定輸出電流下保持低接面溫度。固定頻率進階電流模式控制可讓您將模組與外部時鐘來源同步。外部分壓器實現可調整的輸出電壓。TPSM843620 SYNC/FSEL 與 MODE 接腳提供可選的開關頻率、緩啟動時間、電流限制和內部補償功能。
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPSM843320 SIMPLIS Model

SLUM877.ZIP (1020 KB) - SIMPLIS Model
計算工具

CALC-TOOL-TPSM843X20 CALC-TOOL-TPSM843X20

TPSM843320 TPSM843620 TPSM843820 Calculator Tool
支援產品和硬體

支援產品和硬體

產品
電源模組 (整合式電感器)
TPSM843320 4-V 至 18-V 輸入、進階電流模式、3-A 同步 SWIFT™ 降壓電源模組 TPSM843320E 具有擴展溫度的 4V 至 18V 輸入、3A 同步 SWIFT™ 降壓電源模組 TPSM843620 4-V 至 18-V 輸入、進階電流模式、6-A 同步 SWIFT™ 降壓電源模組 TPSM843620E 具有擴展溫度的 4V 至 18V 輸入、6A 同步 SWIFT™ 降壓電源模組 TPSM843820 4-V 至 18-V 輸入、進階電流模式、8-A 同步 SWIFT™ 降壓電源模組 TPSM843820E 具有擴展溫度的 4V 至 18V 輸入、8A 同步 SWIFT™ 降壓電源模組
封裝 針腳 CAD 符號、佔位空間與 3D 模型
uSIP (SIT) 15 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片