TRF3302EVM
TRF3302 평가 모듈
TRF3302EVM
개요
TRF3302EVM(EVM)은 TRF3302 저잡음 증폭기를 빠르게 평가하기 위해 설계되었습니다. EVM은 기본적으로 1,300~1630MHz(L1 대역)에서 작동하도록 조정되어 있으며, 단일 인덕터 변경으로 EVM을 1,165~1320MHz(L2/L5 대역)에 맞게 최적화할 수 있습니다. 4개의 부품을 변경하면 EVM은 1,165~1630MHz(모든 GPS/GNSS 대역)를 동시에 지원하는 광대역으로 작동할 수 있습니다.
특징
- 재구성 가능한 입력 매칭
- 1165MHz~1630GHz를 지원하는 온칩 광대역 출력 매칭
반도체
주문 및 개발 시작
TRF3302EVM — TRF3302 평가 모듈
TRF3302EVM — TRF3302 평가 모듈
RF-CASCADE-CALC-TOOL — TI RF 캐스케이드 계산기
지원되는 제품 및 하드웨어
제품
반도체
하드웨어 개발
개발 키트
평가 보드
RF-CASCADE-CALC-TOOL — TI RF 캐스케이드 계산기
TI RF cascade calculator
제품
반도체
하드웨어 개발
개발 키트
평가 보드
출시 정보
Overview
The RF Cascade Calculator is a web-based tool for performing RF signal chain (lineup) cascade analysis. It computes cascaded performance parameters across a multi-stage RF signal chain using standard cascade equations (Friis formula for noise figure, reciprocal power sums for IP3/IP2/P1dB, etc.).
The tool is hosted on the TI Developer Gallery and runs entirely in the user's browser — no software download or installation is required.
Features (v1.0.0)
RF Cascade Analysis
- Support for up to 10 cascaded stages
- Per-stage input parameters: Name, Gain, OIP3, OIP2, NF, OP1dB
- Configurable source power, source frequency, and analysis bandwidth
- Dynamic stage count (add/remove stages on the fly)
Cascade Calculations (Friis and Standard Cascade Equations)
- Cascade Gain (cumulative sum)
- Cascade Noise Figure
- Cascade OIP3
- Cascade OIP2
- Cascade OP1dB
- Output Power (Pout) per stage
Derived System-Level Results
- Total Cascade Gain (dB)
- Output Power / Pout (dBm)
- Cascade OIP3 / IIP3 (dBm)
- Cascade OIP2 / IIP2 (dBm)
- Cascade NF (dB)
- Cascade OP1dB / IP1dB (dBm)
- Output Noise Spectral Density / NSD (dBm/Hz)
- Output Noise Floor (dBm)
- Signal-to-Noise Ratio / SNR (dB)
- IMD3 (dBc)
- IMD2 (dBc)
- P1dB Saturation Detection with stage identification
Interactive Plot
- Dual-axis Plotly.js chart showing cascade parameters per stage
- Selectable left Y-axis parameter (Gain, OIP3, OIP2, NF, OP1dB)
- Selectable right Y-axis parameter (independent selection)
- Data-point annotations and hover tooltips
- Responsive layout
Input Validation
- Per-field validation with visual feedback (red = error, amber = warning)
- Range checking for all RF parameters
- Cross-field validation (e.g., OIP3 vs OP1dB consistency, passive NF check)
- Non-numeric and out-of-range detection
Tooltip Equations
- Hovering over any result field shows the formula and calculation breakdown
Export
- One-click CSV export of all inputs, cascade results, and derived results
- Organized into sections: Source Config, Per-Stage Inputs, Per-Stage Cascade Results, Overall Results, Derived Results, Saturation Status
새 소식
- v1.0.0
TRF3302EVM-DOC-CERT — TRF3302EVM EU Declaration of Conformity (DoC)
지원되는 제품 및 하드웨어
제품
반도체
하드웨어 개발
평가 보드
TRF3302EVM-DOC-CERT — TRF3302EVM EU Declaration of Conformity (DoC)
제품
반도체
하드웨어 개발
평가 보드
출시 정보
initial release of RoHS Declaration of Conformity for TRF3302EVM
새 소식
- release of RoHS Declaration of Conformity for TRF3302EVM
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | EVM User's guide | TRF3302 Evaluation Module User's Guide | PDF | HTML | 2025. 10. 22 |