TRF3705EVM
TRF3705 평가 모듈
TRF3705EVM
개요
TRF3705EVM 평가 모듈은 기지국 및 통신 장비의 전송 경로에 있는 애플리케이션을 위한 TRF3705 직접 실행 직교 모듈레이터의 평가를 위해 설계되었습니다.
특징
- TRF3705EVM은 4개의 SMA 커넥터를 통한 차동 I/Q 입력 신호를 위해 구성되어 있습니다.
- 직교 모듈레이터의 RF 출력 신호는 SMA 커넥터를 통해 모니터링할 수 있습니다.
- LO 신호도 SMA 커넥터를 통해 제공됩니다.
IQ 변조기
주문 및 개발 시작
평가 보드
TRF3705EVM — TRF3705 Evaluation Module
TRF3705EVM — TRF3705 Evaluation Module
계산 툴
RF-CASCADE-CALC-TOOL — TI RF Cascade Calculator
지원되는 제품 및 하드웨어
제품
IQ 변조기
IQ 복조기
RF FDA(완전 차동 증폭기)
RF PLL 및 신시사이저
RF VGA(가변 게인 증폭기)
RF 게인 블록 증폭기
RF 저잡음 증폭기(LNA)
RF 프론트 엔드 모듈
기타 무선 제품
다운컨버팅 믹서
하드웨어 개발
개발 키트
평가 보드
RF-CASCADE-CALC-TOOL — TI RF Cascade Calculator
TI RF cascade calculator
제품
IQ 변조기
IQ 복조기
RF FDA(완전 차동 증폭기)
RF PLL 및 신시사이저
RF VGA(가변 게인 증폭기)
RF 게인 블록 증폭기
RF 저잡음 증폭기(LNA)
RF 프론트 엔드 모듈
기타 무선 제품
다운컨버팅 믹서
하드웨어 개발
개발 키트
평가 보드
출시 정보
Overview
The RF Cascade Calculator is a web-based tool for performing RF signal chain (lineup) cascade analysis. It computes cascaded performance parameters across a multi-stage RF signal chain using standard cascade equations (Friis formula for noise figure, reciprocal power sums for IP3/IP2/P1dB, etc.).
The tool is hosted on the TI Developer Gallery and runs entirely in the user's browser — no software download or installation is required.
Features (v1.0.0)
RF Cascade Analysis
- Support for up to 10 cascaded stages
- Per-stage input parameters: Name, Gain, OIP3, OIP2, NF, OP1dB
- Configurable source power, source frequency, and analysis bandwidth
- Dynamic stage count (add/remove stages on the fly)
Cascade Calculations (Friis and Standard Cascade Equations)
- Cascade Gain (cumulative sum)
- Cascade Noise Figure
- Cascade OIP3
- Cascade OIP2
- Cascade OP1dB
- Output Power (Pout) per stage
Derived System-Level Results
- Total Cascade Gain (dB)
- Output Power / Pout (dBm)
- Cascade OIP3 / IIP3 (dBm)
- Cascade OIP2 / IIP2 (dBm)
- Cascade NF (dB)
- Cascade OP1dB / IP1dB (dBm)
- Output Noise Spectral Density / NSD (dBm/Hz)
- Output Noise Floor (dBm)
- Signal-to-Noise Ratio / SNR (dB)
- IMD3 (dBc)
- IMD2 (dBc)
- P1dB Saturation Detection with stage identification
Interactive Plot
- Dual-axis Plotly.js chart showing cascade parameters per stage
- Selectable left Y-axis parameter (Gain, OIP3, OIP2, NF, OP1dB)
- Selectable right Y-axis parameter (independent selection)
- Data-point annotations and hover tooltips
- Responsive layout
Input Validation
- Per-field validation with visual feedback (red = error, amber = warning)
- Range checking for all RF parameters
- Cross-field validation (e.g., OIP3 vs OP1dB consistency, passive NF check)
- Non-numeric and out-of-range detection
Tooltip Equations
- Hovering over any result field shows the formula and calculation breakdown
Export
- One-click CSV export of all inputs, cascade results, and derived results
- Organized into sections: Source Config, Per-Stage Inputs, Per-Stage Cascade Results, Overall Results, Derived Results, Saturation Status
새 소식
- v1.0.0
설계 파일
기술 자료
=
TI에서 선정한 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
3개 모두 보기
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | EVM User's guide | TRF3705EVM Evaluation Module | 2011. 10. 11 | ||
| 인증서 | TRF3705EVM EU Declaration of Conformity (DoC) | 2019. 1. 2 | |||
| 설계 가이드 | TRF3705EVM Design Package | 2014. 6. 27 |