MSP430FE423 16-bit Ultra-Low-Power Microcontroller for Energy Meters, 8KB Flash, 256B RAM | TI.com

MSP430FE423 (ACTIVE) 16-bit Ultra-Low-Power Microcontroller for Energy Meters, 8KB Flash, 256B RAM

 

Recommended alternative parts

  • MSP430FE423A  - The device has SIMILAR FUNCTIONALITY but is not functionally equivalent to the compared device.   MSP430FE423A is recommended for new designs
  • MSP430FE423A  - The device has SIMILAR FUNCTIONALITY but is not functionally equivalent to the compared device.   The MSP430FE423A is recommended for new designs.

Description

The TI MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 6 µs.

The MSP430FE42x series are microcontroller configurations with three independent 16-bit sigma-delta ADCs and an embedded signal processor core used to measure and calculate single-phase energy in both 2-wire and 3-wire configurations. Also included are a built-in 16-bit timer, 128-segment LCD drive capability, and 14 I/O pins.

Typical applications include 2-wire and 3-wire single-phase metering including tamper-resistant meter implementations.

Features

  • Low Supply Voltage Range: 2.7 V to 3.6 V
  • Ultra-Low Power Consumption:
    • Active Mode: 400 µA at 1 MHz, 3 V
    • Standby Mode: 1.6 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Five Power-Saving Modes
  • Wake up From Standby Mode in Less Than 6 µs
  • Frequency-Locked Loop, FLL+
  • 16-Bit RISC Architecture, 125-ns Instruction Cycle Time
  • Embedded Signal Processing for Single-Phase Energy Metering With Integrated Analog Front End and Temperature Sensor (ESP430CE1)
  • 16-Bit Timer_A With Three Capture/Compare Registers
  • Integrated LCD Driver for 128 Segments
  • Serial Communication Interface (USART), Asynchronous UART or Synchronous SPI Selectable by Software
  • Brownout Detector
  • Supply Voltage Supervisor and Monitor With Programmable Level Detection
  • Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
  • Bootloader (BSL)
  • Family Members Include:
    • MSP430FE423
      8KB + 256 B of Flash Memory, 256 B of RAM
    • MSP430FE425
      16KB + 256 B of Flash Memory, 512 B of RAM
    • MSP430FE427
      32KB + 256 B of Flash Memory, 1KB of RAM
  • Available in 64-Pin Quad Flat Pack (LQFP)

Parametrics

Compare all products in Other MSP430 MCUs Email Download to Excel
Part number Order Non-volatile memory (kB) RAM (KB) ADC ADC: channels (#) GPIO pins (#) I2C SPI UART Comparator channels (#) Package Group Approx. price (US$) USB Timers - 16-bit Bootloader (BSL) Package size: mm2:W x L (PKG)
MSP430FE423 Order now 8     0.25     16-bit Sigma Delta     3     14     0     1     1     0     LQFP | 64     4.70 | 1ku     No     1     UART     64LQFP: 144 mm2: 12 x 12 (LQFP | 64)    
MSP430FE425 Order now 16     0.5     16-bit Sigma Delta     3     14     0     1     1     0     LQFP | 64     5.12 | 1ku     No     1     UART     64LQFP: 144 mm2: 12 x 12 (LQFP | 64)    
MSP430FE427 Samples not available 32     1     16-bit Sigma Delta     3     14     0     1     1     0     LQFP | 64     5.45 | 1ku     No     1     UART     64LQFP: 144 mm2: 12 x 12 (LQFP | 64)