SPRUJE8C December   2024  – June 2025 AM2752-Q1 , AM2754-Q1

1.   1
2.   Description
3.   Features
4.   4
5. 1Evaluation Module Overview
   1. 1.1 Introduction
   2. 1.2 Preface Read This First
      1. 1.2.1 Important Usage Notes
   3. 1.3 Kit Contents
   4. 1.4 Device Information
      1. 1.4.1 Security
   5. 1.5 Audio Expansion Connectors
6. 2Hardware
   1. 2.1  Component Identification
   2. 2.2  Power Requirements
      1. 2.2.1 Power Input Using USB Type-C Connector
      2. 2.2.2 Power Status LEDs
      3. 2.2.3 Power Tree
      4. 2.2.4 Power Sequence
      5. 2.2.5 PMIC
   3. 2.3  Reset
   4. 2.4  Clock
   5. 2.5  Boot Mode Selection
   6. 2.6  Header Information
   7. 2.7  Push Buttons
   8. 2.8  Switches
   9. 2.9  GPIO Mapping
   10. 2.10 Interfaces
       1. 2.10.1  Memory Interface
          1. 2.10.1.1 OSPI Interface
          2. 2.10.1.2 Board ID EEPROM
          3. 2.10.1.3 MMC0 Interface
          4. 2.10.1.4 HYPERRAM
       2. 2.10.2  Ethernet Interface
          1. 2.10.2.1 Ethernet Add-on Connectors
       3. 2.10.3  Audio Interfaces
          1. 2.10.3.1 Audio Clocking
          2. 2.10.3.2 McASP
          3. 2.10.3.3 MLB
       4. 2.10.4  I2C Interface
       5. 2.10.5  SPI
       6. 2.10.6  UART
       7. 2.10.7  MCAN
       8. 2.10.8  JTAG
       9. 2.10.9  USB
       10. 2.10.10 ADC
   11. 2.11 AEC Mapping
       1. 2.11.1 Audio Expansion Connector 1
       2. 2.11.2 Audio Expansion Connector 2
   12. 2.12 Test Points
7. 3Hardware Design Files
8. 4Additional Information
   1. 4.1 If You need Assistance
   2. 4.2 Trademarks
   3. 4.3 Rev. E2 Design Changes
9. 5References
   1. 5.1 Reference Documents
   2. 5.2 Other TI Components Used This Design
10. 6Revision History