Top

Product details

Parameters

Number of channels (#) 2 Total supply voltage (Max) (+5V=5, +/-5V=10) 32 Total supply voltage (Min) (+5V=5, +/-5V=10) 3 Rail-to-rail In to V- GBW (Typ) (MHz) 0.7 Slew rate (Typ) (V/us) 0.3 Vos (offset voltage @ 25 C) (Max) (mV) 5 Iq per channel (Typ) (mA) 0.35 Vn at 1 kHz (Typ) (nV/rtHz) 40 Rating Catalog Operating temperature range (C) -25 to 85 Offset drift (Typ) (uV/C) 7 Features Input bias current (Max) (pA) 150000 CMRR (Typ) (dB) 80 Output current (Typ) (mA) 30 Architecture Bipolar open-in-new Find other General-purpose op amps

Package | Pins | Size

PDIP (P) 8 93 mm² 9.81 x 9.43 SOIC (D) 8 19 mm² 4.9 x 3.9 SOIC (D) 8 19 mm² 3.91 x 4.9 VSSOP (DGK) 8 15 mm² 3 x 4.9 open-in-new Find other General-purpose op amps

Features

  • Wide supply range of 3 V to 36 V (B version)
  • Quiescent current: 300 µA per amplifier (B version, typical)
  • Unity-gain bandwidth of 1.2 MHz (B version)
  • Common-mode input voltage range includes ground, enabling direct sensing near ground
  • Low input offset voltage of 3 mV at 25°C (A and B versions, maximum)
  • Internal RF and EMI filter (B version)
  • On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

All trademarks are the property of their respective owners.

open-in-new Find other General-purpose op amps

Description

The LM358B and LM2904B devices are the next-generation versions of the industry-standard operational amplifiers (op amps) LM358 and LM2904, which include two high-voltage (36-V) op amps. These devices provide outstanding value for cost-sensitive applications, with features including low offset (300 µV, typical), common-mode input range to ground, and high differential input voltage capability.

The LM358B and LM2904B op amps simplify circuit design with enhanced features such as unity-gain stability, lower offset voltage of 3 mV (maximum at room temperature), and lower quiescent current of 300 µA per amplifier (typical). High ESD (2 kV, HBM) and integrated EMI and RF filters enable the LM358B and LM2904B devices to be used in the most rugged, environmentally challenging applications.

The LM358B and LM2904B amplifiers are available in micro-sized packaging, such as the SOT23-8, as well as industry standard packages, including SOIC, TSSOP, and VSSOP.

open-in-new Find other General-purpose op amps
Download
Similar products you might be interested in
open-in-new Compare products
Exact equivalent in functionality and parametrics to the compared device:
NEW LM358B ACTIVE 1.2 MHz industry standard dual-channel amplifier with -40C to 85C operation Pin-to-pin upgrade with improved performance and pricing
Same functionality and pinout but is not an equivalent to the compared device:
LM358LV ACTIVE 2-Channel industry-standard low-voltage operational amplifier Optimized for low-voltage (5.5V) operation

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 35
Type Title Date
* Datasheet Industry-Standard Dual Operational Amplifiers datasheet (Rev. X) Jun. 22, 2020
Technical articles What is an op amp? Jan. 21, 2020
Application notes AN-31 amplifier circuit collection (Rev. C) Mar. 04, 2019
Application notes Design Guidelines for Devices with LM324/LM358 Cores Jan. 17, 2019
Technical articles Designing tiny microphone circuits with the industry’s smallest op amp Apr. 12, 2018
Technical articles How to lay out a PCB for high-performance, low-side current-sensing designs Feb. 06, 2018
Technical articles Low-side current sensing for high-performance cost-sensitive applications Jan. 22, 2018
White papers The Signal e-book: A compendium of blog posts on op amp design topics Mar. 28, 2017
Application notes Building an Op Amp With Bipolar Transistors, A Historical Application Note (Rev. A) Sep. 19, 2016
Application notes AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B) May 06, 2013
Application notes AN-262 Applying Dual and Quad FET Op Amps (Rev. B) May 06, 2013
Application notes AN-260 A 20-Bit (1 ppm) Linear Slope-Integrating A/D Converter (Rev. B) May 05, 2013
Application notes Super Matched Bipolar Transistor Pair Sets New Standards for Drift and Noise (Rev. B) May 05, 2013
Application notes AN-20 An Applications Guide for Op Amps (Rev. C) May 01, 2013
Application notes AN-29 IC Op Amp Beats FETs on Input Current (Rev. B) May 01, 2013
Application notes AN-30 Log Converters (Rev. B) May 01, 2013
Application notes AN-4 Monolithic Op Amp—The Universal Linear Component (Rev. B) May 01, 2013
Application notes AN-79 IC Preamplifier Challenges Choppers on Drift (Rev. B) May 01, 2013
Application notes AN-278 Designing with a New Super Fast Dual Norton Amplifier (Rev. B) Apr. 23, 2013
Application notes AN-263 Sine Wave Generation Techniques (Rev. C) Apr. 22, 2013
Application notes Applying a New Precision Op Amp Oct. 04, 2004
Application notes AN-46 The Phase Locked Loop IC as a Communication System Building Block May 14, 2004
Application notes AN-480 A 40 MHz Programmable Video Op Amp May 11, 2004
Application notes AN-446 A 150W IC Op Amp Simplifies Design of Power Circuits May 10, 2004
Application notes AN-24 A Simplified Test Set for Op Amp Characterization May 10, 2004
Application notes AN-32 FET Circuit Applications May 10, 2004
Application notes AN-241 Working with High Impedance Op Amps May 03, 2004
Application notes Audio Applications of Linear Integrated Circuits May 02, 2004
Application notes Predicting Op Amp Slew Rate Limited Response Oct. 07, 2002
Application notes General Purpose Power Supply Oct. 03, 2002
Application notes Get Fast Stable Response From Improved Unity-Gain Followers Oct. 02, 2002
Application notes Get More Power Out of Dual or Quad Op-Amps Oct. 02, 2002
Application notes Low Drift Amplifiers Oct. 02, 2002
Application notes Precise Tri-Wave Generation Oct. 02, 2002
Application notes True RMS Detector Oct. 01, 2002

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
29
Description

The TI Precision Amplifier Quickstart Kit simplifies op amp selection, design, and evaluation with samples of six op amps and an evaluation module for prototyping surface-mount ICs. The kit is the perfect starting point for your amplifier designs.

You may also be interested in TI Precision Labs, the (...)

Features

The kit includes:

  • Six samples: Three low-power, low-voltage amplifiers and three low-power, wide-supply amplifiers. See the table below for the complete list.
  • DIP Adapter Evaluation Module (DIP-ADAPTER-EVM) for prototyping surface-mount ICs. The EVM supports the following package types: D or U (...)
EVALUATION BOARDS Download
document-generic User guide
Description

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

Features
  • Simplifies prototyping of SMT IC’s
  • Supports 6 common package types
  • Low Cost
EVALUATION BOARDS Download
document-generic User guide
20
Description
The DUAL-DIYAMP-EVM is a unique evaluation module (EVM) family that provides engineers and do it yourselfers (DIYers) with real-world amplifier circuits, enabling you to quickly evaluate design concepts and verify simulations. It is designed specifically for dual package op amps in the (...)
Features
  • 10 circuit configurations to choose from: Non-Inverting, Inverting, Active Filters, Difference Amplifier with Reference Buffer, and more!
  • Multiple interface options: SMA, Header, Breadboard, Wire
  • Designed for 0805 size components; 0603 size friendly
  • Circuit schematic provided in silkscreen on the back (...)
EVALUATION BOARDS Download
document-generic User guide
Description

The Universal OPAMPEVM is a series of general purpose blank circuit boards that simplify prototyping circuits for a variety of IC package types. The evaluation module board design allows many different circuits to be constructed easily and quickly. Five models are offered with each targeted for (...)

Design tools & simulation

SIMULATION MODELS Download
SNOM268A.ZIP (3 KB) - PSpice Model
SIMULATION MODELS Download
SNOM670.ZIP (4 KB) - TINA-TI Spice Model
SIMULATION MODELS Download
SNOM671.ZIP (22 KB) - TINA-TI Reference Design
SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOLS Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CALCULATION TOOLS Download
Analog engineer's calculator
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
  • Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
    • Noise calculations
    • Common unit translation
  • Solves common amplifier circuit design problems
    • Gain selections using standard resistors
    • Filter configurations
    • Total noise for common amplifier configurations
  • (...)

Reference designs

REFERENCE DESIGNS Download
94% Peak efficiency, 150W norm, 240W peak industrial AC/DC power supply with CC/CV reference design
TIDA-010038 — This compact, high efficiency, 24V DC, 150W nominal, 240W peak output at 230VAC reference design is targeted for industrial AC/DC power supplies. The circuit consists of a frontend transition mode (TrM) power factor correction(PFC) circuit based on the UCC28056, followed by a robust LLC stage for an (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Boost for LED Driver +/-17V@0.35A and +/-30V@0.35A
PMP4057 — This low cost LED driver can regulate 350mA into a series string of LEDs with an output of up to 30V. It can operate over a wide input range and can tolerate transients up to 30Vin making it suitable for automotive applications. Open LED protection is included.

CAD/CAE symbols

Package Pins Download
PDIP (P) 8 View options
SOIC (D) 8 View options
VSSOP (DGK) 8 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos