Top

Product details

Parameters

Technology Family LVC VCC (Min) (V) 1.65 VCC (Max) (V) 5.5 Channels (#) 2 IOL (Max) (mA) 32 ICC (Max) (uA) 10 IOH (Max) (mA) 0 Input type Standard CMOS Output type Open-Drain Features Very high speed (tpd 5-10ns), Partial power down (Ioff), Over-voltage tolerant inputs Data rate (Mbps) 300 Rating Catalog open-in-new Find other Non-Inverting buffer/driver

Package | Pins | Size

DSBGA (YZP) 6 2 mm² .927 x 1.427 SOT-23 (DBV) 6 5 mm² 2.9 x 1.6 SOT-SC70 (DCK) 6 4 mm² 2 x 2.1 USON (DRY) 6 1 mm² 1.5 x 1 X2SON (DSF) 6 1 mm² 1 x 1 open-in-new Find other Non-Inverting buffer/driver

Features

  • Dual Open-Drain Buffer Configuration
  • -24-mA Output Drive at 3.3 V
  • Support Translation-Up and Down
  • Available in the Texas Instruments
    NanoFree™ Package
  • Supports 5-V VCC Operation
  • Inputs and Open-Drain Outputs Accept Voltages
    Up to 5.5 V
  • Max tpd of 3.7 ns at 3.3 V
  • Low Power Consumption, 10-µA Max ICC
  • Typical VOLP (Output Ground Bounce)
    <0.8 V at VCC = 3.3 V, TA = 25°C
  • Typical VOHV (Output VOH Undershoot)
    >2 V at VCC = 3.3 V, TA = 25°C
  • Ioff Supports Live Insertion, Partial-Power-Down
    Mode, and Back-Drive Protection
  • Latch-Up Performance Exceeds 100 mA
    Per JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)
    • 1000-V Charged-Device Model (C101)
open-in-new Find other Non-Inverting buffer/driver

Description

This dual buffer and driver is designed for 1.65-V to 5.5-V VCC operation. The output of the SN74LVC2G07 device is open drain and can be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 32 mA.

NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

open-in-new Find other Non-Inverting buffer/driver
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 29
Type Title Date
* Datasheet SN74LVC2G07 Dual Buffer and Driver With Open-Drain Outputs datasheet (Rev. L) May 22, 2015
Selection guide Little Logic Guide 2018 (Rev. G) Jul. 06, 2018
Selection guide Logic Guide (Rev. AB) Jun. 12, 2017
Application note How to Select Little Logic (Rev. A) Jul. 26, 2016
Application note Implications of Slow or Floating CMOS Inputs (Rev. D) Jun. 23, 2016
Application note Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) Dec. 02, 2015
User guide LOGIC Pocket Data Book (Rev. B) Jan. 16, 2007
More literature Design Summary for WCSP Little Logic (Rev. B) Nov. 04, 2004
Application note Semiconductor Packing Material Electrostatic Discharge (ESD) Protection Jul. 08, 2004
Application note Selecting the Right Level Translation Solution (Rev. A) Jun. 22, 2004
User guide Signal Switch Data Book (Rev. A) Nov. 14, 2003
Application note Use of the CMOS Unbuffered Inverter in Oscillator Circuits Nov. 06, 2003
More literature Logic Cross-Reference (Rev. A) Oct. 07, 2003
User guide LVC and LV Low-Voltage CMOS Logic Data Book (Rev. B) Dec. 18, 2002
Application note Texas Instruments Little Logic Application Report Nov. 01, 2002
Application note TI IBIS File Creation, Validation, and Distribution Processes Aug. 29, 2002
More literature Standard Linear & Logic for PCs, Servers & Motherboards Jun. 13, 2002
Application note 16-Bit Widebus Logic Families in 56-Ball, 0.65-mm Pitch Very Thin Fine-Pitch BGA (Rev. B) May 22, 2002
Application note Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices May 10, 2002
More literature STANDARD LINEAR AND LOGIC FOR DVD/VCD PLAYERS Mar. 27, 2002
More literature Military Low Voltage Solutions Apr. 04, 2001
Application note Migration From 3.3-V To 2.5-V Power Supplies For Logic Devices Dec. 01, 1997
Application note Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A) Aug. 01, 1997
Application note CMOS Power Consumption and CPD Calculation (Rev. B) Jun. 01, 1997
Application note LVC Characterization Information Dec. 01, 1996
Application note Input and Output Characteristics of Digital Integrated Circuits Oct. 01, 1996
Application note Live Insertion Oct. 01, 1996
User guide Low-Voltage Logic (LVC) Designer's Guide Sep. 01, 1996
Application note Understanding Advanced Bus-Interface Products Design Guide May 01, 1996

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
10
Description
Flexible EVM designed to support any device that has a DCK, DCT, DCU, DRL, or DBV package in a 5 to 8 pin count.
Features
  • Board design allows for versatility in evaluation
  • Supports a wide-range of logic devices
EVALUATION BOARD Download
49
Description
The BOOSTXL-AFE031-DF1 evaluation module features the AFE031, TI’s integrated power-line communication (PLC) analog front-end device. When paired with a supported C2000™ MCU LaunchPad™ development kit, the BoosterPack™ plug-in module offers a robust evaluation platform for (...)
Features
  • AFE031-based PLC transceiver for SunSpec rapid shutdown applications
  • Integrated powerline driver with thermal and overcurrent protection
  • Large output swing: 12Vpp at 1.5A with 15VDC supply
  • Programmable Tx/Rx filters and gain control
  • C2000Ware transmit and receive examples
EVALUATION BOARD Download
30
Description
LAUNCHXL-F280049C is a low-cost development board for TI C2000™ Real-Time Controllers series of F28004x devices. Ideal for initial evaluation and prototyping, it provides a standardized and easy to use platform to develop your next application. This extended version LaunchPad offers extra pins (...)
Features

Hardware Features

  • TMS320F280049C: 100 MHz C28x CPU with FPU and TMU, 256 KB Flash, InstaSPIN-FOC enabled, 3x 12-bit ADC, CAN, encoder, FSI, UART, and more
  • On-board XDS110 debug probe for real-time debug and flash programming
  • 80 pin LaunchPad leveraging the BoosterPack ecosystem
  • Power domain isolation (...)
EVALUATION BOARD Download
199
Description
To get started:

Step 1: Hardware
Order TAS2770EVM (for mono) or request TAS2770EVM-STEREO (for stereo) evaluation module & PP-SALB2-EVM learning board (if using speaker protection features)

Step 2: Software
Request PurePath Console 3 (PPC3) control GUI, be sure to indicate you are working with the (...)
Features
  • Stereo or Mono evaluation mode USB input
  • Connect up to eight boards
  • Interface to TAS2559YZEVM for speaker protection evaluation
  • Access to TAS2770 add-in PurePath Console 3
EVALUATION BOARD Download
199
Description
The TAS2770EVM-Stereo evaluation module provides developers with a simple to use module pre-configured in as a stereo solution. It is powerful tool kit for assessing stereo or mono implementations of the TAS2770 with or without IV sense. Everything needed for evaluating TAS2770 as a conventional amp (...)
Features
  • Stereo or Mono evaluation mode
  • USB input
  • IV sense evaluation mode
  • Interface to TAS2559YZEVM for speaker protection evaluation
  • Access to TAS2770 add-in PurePath Console 3
EVALUATION BOARD Download
249
Description
To get started:

Step 1: Hardware
Purchase the TAS3251 Evaluation Module
If you intend to use Smart Amp features, purchase the Speaker Characterization Board for PurePath™ Audio Smart Amp 

Step 2: Software
Request access to PurePath™ Console 3 and TAS3251 Software 
If you intend to use Smart Amp features,  (...)

Features
  • Stereo, Mono, and Two-way speaker configurations
  • Audio Inputs: USB, Optical SPDIF, COAX SPDIF, Direct I2S or TDM
  • Audio Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Works with PurePath™ Console 3 for advanced tuning
  • Double-sided, plated-through, 2 oz. Cu 2 layer PCB layout
EVALUATION BOARD Download
249
Description
The TAS5431Q1EVM evaluation module (EVM) showcases the latest TI analog input class D closed-loop mono amplifier. The EVM can be used as stand-alone platform with default I2C register settings. The EVM also works with PPC3 GUI for programming I2C register settings.
Features
  • Mono audio for automotive emergency call (eCall) and VESS applications
  • Runs with I2C initialization
  • GUI control via USB port
EVALUATION BOARD Download
199
Description
The TPA6304-Q1 evaluation module showcases the industry's smallest 2.1-MHz 4-channel Analog Input Class-D Audio solution for Automotive Infotainment applications. TPA6304-Q1’s 2.1-MHz switching frequency allows customers to significantly reduce inductor size and cost and optimize total system (...)
Features
  • 2.1-Mhz switching frequency
  • 4-channel Analog input Class-D automotive audio amplifier
  • 27-W/Ch at 10% THD+N into 4-Ω with a 14.4-V supply
  • 45-W/Ch at 10% THD+N into 2-Ω with a 14.4-V supply
  • I2C diagnostics and protection
EVALUATION BOARD Download
249
Description

The TPA6404Q1EVM evaluation module (EVM) demonstrates the TPA6404-Q1 integrated circuit from Texas Instruments. The TPA6404-Q1 device is a four-channel analog-input Class-D audio amplifier that implements a 2.1 MHz PWM switching frequency that enables a cost optimized solution in a very small PCB (...)

Features
  • 4.5 V to 18 V input supply voltage support
  • Simple PPC3 GUI driven interface to support evaluation and diagnostics
  • Intelligent load diagnostics, including advanced AC diagnostic for Tweeter detection with impedance and phase response
  • 4 BTL output channels and 4 differential inputs 
  • Double-sided (...)
DAUGHTER CARD Download
Description

TMDSCNCD280049C is an HSEC180 controlCARD based evaluation and development tool for the C2000™ F28004x series of microcontroller products. controlCARDs are ideal to use for initial evaluation and system prototyping. controlCARDs are complete board-level modules that utilize one of two standard form (...)

Features

Hardware Features

  • Isolated on-board XDS100v2 USB-to-JTAG debug probe enables real-time in-system programming and debugging
  • Standard 180-pin controlCARD HSEC interface
  • Analog I/O, digital I/O and JTAG signals at card interface
  • Hardware Files are in C2000Ware at boards\controlCARDs\TMDSCNCD280049C

Software (...)

DAUGHTER CARD Download
159
Description

TMDSCNCD28379D is an HSEC180 controlCARD based evaluation and development tool for the F2837xD,  F2837xS, and F2807x series in the TI MCU. controlCARDs are ideal to use for initial evaluation and system prototyping. controlCARDs are complete board-level modules that utilize one of two standard (...)

Features

Hardware Features

  • TMDSCNCD28379D: TMS320F28379D HSEC180 based controlCARD
    • Isolated XDS100v2 USB-to-JTAG Debug Probe enables real-time in-system programming and debugging
  • Standard 180-pin HSEC interface
  • Analog I/O, digital I/O and JTAG signals at card interface
  • USB Host connector
  • SDCard Slot
  • Hardware Files (...)
DEVELOPMENT KIT Download
Description

To get started developing:
Step 1: Buy the C2000 MCU F28379D LaunchPad
Step 2: Read the quick start guide

LAUNCHXL-F28379D is a low cost evaluation and development tool for the F2837xD,  F2837xS, and F2807x series in the TI MCU LaunchPad ecosystem which is compatible with various plug-on BoosterPacks (...)

Features

Hardware features

  • USB connected isolated XDS100v2 JTAG debug probe for real-time debug and flash programming
  • 4x 20-pin headers/connectors
  • Programmable buttons and LEDs
  • TMS320F28379D: 200 MHz dual C28xCPUs and dual CLAs, 1 MB Flash, 16-bit/12-bit ADCs, comparators, 12-bit DACs, delta-sigma sinc filters (...)
DEVELOPMENT KIT Download
219
Description

TMDSDOCK28379D is a HSEC180 controlCARD based evaluation and development tool for the C2000™ Delfino™ F2837x and Piccolo F2807x series of microcontroller products. The Docking Station provides power to the controlCARD and has a bread-board area for prototyping. Access to the key device (...)

Features

Hardware Features

  • TMDSCNCD28379D: TMS320F28379D HSEC180 based controlCARD
    • Isolated XDS100v2 USB-to-JTAG Debug Probe enables real-time in-system programming and debugging
  • Bread-board like baseboard with HSEC180 controlCARD female connector
    • Header pin access to key MCU signals
    • Breadboard area for (...)

Software development

DRIVER OR LIBRARY Download
SPRCAE5.ZIP (3864 KB)

Design tools & simulation

SIMULATION MODEL Download
SCEM254E.ZIP (24 KB) - IBIS Model
SIMULATION MODEL Download
SCEM621.ZIP (7 KB) - PSpice Model

Reference designs

REFERENCE DESIGNS Download
Industrial Servo Drive and AC Inverter Drive Reference Design
TIDM-SERVODRIVE The DesignDRIVE Development Kit is a reference design for a complete industrial drive directly connecting to a three phase ACI or PMSM motor. Many drive topologies can be created from the combined control, power and communications technologies included on this single platform.  Includes (...)
document-generic Schematic
REFERENCE DESIGNS Download
Stereo Evaluation Module Reference Design of the Digital Input, Class-D, IV Sense Audio Amplifier
TIDA-01572 — This reference design provides a high-performance stereo audio subsystem for use in PC applications. It operates off a single supply, ranging from 4.5 V to 16 V, and features the TAS2770, a digital-input Class-D audio amplifier that provides excellent noise and distortion performance and is (...)
document-generic Schematic
REFERENCE DESIGNS Download
SunSpec Rapid Shutdown Transmit and Receive Reference Design
TIDA-060001 — This reference design interfaces an AFE031 Powerline Communications Analog Front End with a C2000 MCU to send and receive data over a wired coupled interface using frequency shift keying (FSK). The design demonstrates the SunSpec standard protocol transmitting the specific 33-bit word packet using (...)
document-generic Schematic
REFERENCE DESIGNS Download
Isolated CAN Flexible Data (FD) Rate Repeater Reference Design
TIDA-01487 — CAN and CANopen are legacy fieldbus protocols used in many applications in factory automation. Whenever high voltage could damage the end equipment there is need for isolation. This isolated CAN flexible data (FD) rate repeater reference design adds electrical isolation between two CAN bus (...)
document-generic Schematic

CAD/CAE symbols

Package Pins Download
DSBGA (YZP) 6 View options
SC70 (DCK) 6 View options
SON (DRY) 6 View options
SON (DSF) 6 View options
SOT-23 (DBV) 6 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos