Product details

Protocols HDMI Speed (Max) (Gbps) 6 Supply voltage (V) 3.3, 1.1 Operating temperature range (C) 0 to 85
Protocols HDMI Speed (Max) (Gbps) 6 Supply voltage (V) 3.3, 1.1 Operating temperature range (C) 0 to 85
WQFN (RSB) 40 25 mm² 5 x 5
  • AC-coupled TMDS or DisplayPort Dual-Mode Physical Layer Input to HDMI2.0bTMDS Physical Layer Output Supporting up to 6 Gbps Data Rate, Compatible with HDMI2.0b Electrical Parameters
  • Supporting DisplayPort Dual-Mode Standard Version 1.1
  • Support 4k2k60p and up to WUXGA 16-bit Color Depth or 1080p with Higher Refresh Rates
  • Programmable Fixed Receiver Equalizer up to
    15.5 dB
  • Global or Independent High Speed Lane Control, Pre-emphasis and Transmit Swing, and Slew Rate Control
  • I2C or Pin Strap Programmable
  • Configurable as a DisplayPort Redriver via I2C
  • Full Lane Swap on Main Lanes
  • Low Power Consumption
    • –200 mW Active at 6-Gbps and –8 mW at Shutdown State
  • 40-pin, 0.4 mm Pitch, 5 mm x 5 mm, WQFN Package, Pin Compatible to the SN75DP159RSB Retimer
  • AC-coupled TMDS or DisplayPort Dual-Mode Physical Layer Input to HDMI2.0bTMDS Physical Layer Output Supporting up to 6 Gbps Data Rate, Compatible with HDMI2.0b Electrical Parameters
  • Supporting DisplayPort Dual-Mode Standard Version 1.1
  • Support 4k2k60p and up to WUXGA 16-bit Color Depth or 1080p with Higher Refresh Rates
  • Programmable Fixed Receiver Equalizer up to
    15.5 dB
  • Global or Independent High Speed Lane Control, Pre-emphasis and Transmit Swing, and Slew Rate Control
  • I2C or Pin Strap Programmable
  • Configurable as a DisplayPort Redriver via I2C
  • Full Lane Swap on Main Lanes
  • Low Power Consumption
    • –200 mW Active at 6-Gbps and –8 mW at Shutdown State
  • 40-pin, 0.4 mm Pitch, 5 mm x 5 mm, WQFN Package, Pin Compatible to the SN75DP159RSB Retimer

The TDP158 device is an AC-Coupled HDMI signal to transition-minimized differential signal (TMDS) Redriver supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI) 1.4b and 2.0b output signals. The TDP158 supports four TMDS channels and Digital Display Control (DDC) interfaces. The TDP158 supports signaling rates up to 6 Gbps to allow for the highest resolutions of 4k2k60p 24 bits per pixel and up to WUXGA 16-bit color depth or 1080p with higher refresh rates. The TDP158 can be configured to support the HDMI2.0 standard.

The TDP158 supports dual power supply rails of
1.1 V on VDD and 3.3 V on VCC for power reduction. Several methods of power management are implemented to reduce overall power consumption. TDP158 supports fixed receiver EQ gain using I2C or pin strap to compensate for different lengths input cable or board traces.

The TDP158 device is an AC-Coupled HDMI signal to transition-minimized differential signal (TMDS) Redriver supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI) 1.4b and 2.0b output signals. The TDP158 supports four TMDS channels and Digital Display Control (DDC) interfaces. The TDP158 supports signaling rates up to 6 Gbps to allow for the highest resolutions of 4k2k60p 24 bits per pixel and up to WUXGA 16-bit color depth or 1080p with higher refresh rates. The TDP158 can be configured to support the HDMI2.0 standard.

The TDP158 supports dual power supply rails of
1.1 V on VDD and 3.3 V on VCC for power reduction. Several methods of power management are implemented to reduce overall power consumption. TDP158 supports fixed receiver EQ gain using I2C or pin strap to compensate for different lengths input cable or board traces.

Download

Similar products you might be interested in

open-in-new Compare products
Same functionality with different pin-out to the compared device.
SN65DP159 ACTIVE 6-Gbps DP++ 1.1 to HDMI 2.0 retimer -40 to 85C operating temperature HDMI2.0 retimer instead of redriver (no alternative HDMI2.0 redriver)
NEW TDP0604 ACTIVE DP++ 6-Gbps HDMI 2.0 redriver 

DP++ to HDMI level shifter or HDMI redriver

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 7
Type Title Date
* Data sheet TDP158 6-Gbps, AC-Coupled to TMDS™ or HDMI™ Level Shifter Redriver datasheet (Rev. D) 17 Mar 2020
Application note TDP158 Configuration Guide 16 Mar 2020
Application note TDP158 Schematic Checklist 03 Apr 2019
User guide SNx5DP159RSB - TDP158RSB Transition Document (Rev. A) 26 Feb 2018
User guide TDP158RSBEVM User's Guide (Rev. A) 09 Feb 2018
Technical article How to select a redriver or retimer for HDMI 2.0 jitter cleansing 01 May 2017
White paper Build a true fidelity system using video signal conditioners 09 Jun 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TDP158RSBEVM — 6-Gbps AC-coupled to TMDS & HDMI™ redriver evaluation module

The TDP158 EVM is a PCB created to help customers evaluate the TDP158 device for video applications.  This EVM can also be used as a hardware reference design for implementation of the TDP158 in the RSB package.  PCB design/layout files can be provided upon request to provide PCB design (...)
In stock
Limit: 2
Simulation model

TDP158 IBIS-AMI Model

SLLM364.ZIP (3486 KB) - IBIS-AMI Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Package Pins Download
WQFN (RSB) 40 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos