Product details


Function Type-C Type PD controller Power role DRP, Sink Alternate mode No External power path control NFET Data role DFP, DRD, DRP Internal power path 20 V 5 A, 5 V 3 A Rating Catalog Dead battery support Yes Operating temperature range (C) -40 to 125 open-in-new Find other USB Type-C & USB Power Delivery ICs

Package | Pins | Size

VQFN (RSM) 32 16 mm² 4 x 4 WQFN (RJK) 38 24 mm² 6 x 4 WQFN (RJK) 38 open-in-new Find other USB Type-C & USB Power Delivery ICs


  • Integrated fully managed power paths

    • Integrated 5-V, 3-A, 36-mΩ sourcing switch (TPS25750S/D)
    • Integrated 28-V, 7-A, 16-mΩ bi-directional load switch (TPS25750D only)

  • Standalone USB Type-C PD solution

    • No firmware development or external micro-controller needed

  • Integrated robust power path protection
    • Integrated reverse current protection, overvoltage protection, and slew rate control the high-voltage bi-directional power path

    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for the 5V/3A source power path
    • 26-V tolerant CC pins for robust protection when connected to non-compliant devices
  • Optimized for power applications
    • Integrated I2C control for TI battery chargers
    • Web-based GUI and pre-configured firmware
    • Optimized for power consumer only (sink) (UFP) applications
    • Optimized for power provider (source) and power consumer (sink) (DRP) applications
  • USB Type-C power delivery (PD) controller
    • 10 configurable GPIOs
    • BC1.2 charging support
    • USB PD 3.0 compliant
    • USB Type-C specification complaint
    • Cable attach and orientation detection
    • Integrated VCONN switch
    • Physical layer and policy engine
    • 3.3-V LDO output for dead battery support
    • Power supply from 3.3 V or VBUS source
open-in-new Find other USB Type-C & USB Power Delivery ICs


The TPS25750 is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for applications supporting USB-C PD Power. The TPS25750 integrates fully managed power paths with robust protection for a complete USB-C PD solution. The TPS25750 also integrates control for external battery charger ICs for added ease of use and reduced time to market. The intuitive web based GUI will ask the user a few simple questions on the applications needs using clear block diagrams and simple multiple-choice questions. As a result, the GUI will create the configuration image for the user’s application, reducing much of the complexity associated with competitive USB PD solutions.

open-in-new Find other USB Type-C & USB Power Delivery ICs

Request more information

  • The TPS25750 graphical user interface (GUI) is available. Start development
  • If you are designing a battery powered system for 45 W and below please consider BQ25792 or BQ25790
  • If you are designing a battery powered system for 45 W and above please consider BQ25731

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 6
Type Title Date
* Data sheet TPS25750 USB Type-C and USB PD Controller with Integrated Power Switches datasheet (Rev. A) Nov. 12, 2020
User guide TPS25750 Application Customization Tool User's Guide Feb. 17, 2021
Certificate TPS25750EVM EU RoHS Declaration of Conformity (DoC) Nov. 17, 2020
User guide TPS25750 Host Interface Technical Reference Manual Nov. 16, 2020
User guide TPS25750EVM Quick Start Guide (Rev. A) Nov. 12, 2020
Technical article Adding USB Type-C® with USB Power Delivery to battery-powered applications Nov. 11, 2020

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

document-generic User guide

The TPS25750EVM is a complete reference design for a single port USB Type-C® and Power Delivery (PD) applications. It allows the user to develop various power profiles and debug existing USB Type-C and Power Delivery systems.

  • Up to 60-W source or 100-W sink
  • Power Delivery (PD) 3.0 compliant
  • Built in I2C programmer
  • Fully configurable for any USB Type-C and Power Delivery application
document-generic User guide

The USB-PD-CHG-EVM-01 evaluation module (EVM) is used to evaluate the BQ25792 device and TPS25750 device together. The BQ25792 is an integrated switched-mode buck-boost battery charge management device in HOTROD (QFN) package, intended for 1- to 4-series cell Li-ion and Li-polymer batteries from (...)

  • Easily evaluate the combination of a high-efficiency 5-A switch-mode buck-boost charger and USB Type-C and PD Controller with integrated switches.
  • Use of Aardvark™ connector to change the PD controller flash settings to meet the user's desired configuration.
  • Use of onboard internal I2C lines between (...)

Design tools & simulation

PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide

Reference designs

Integrated USB Type-C® power delivery (PD) and charging reference design for 2-4 cell batteries
TIDA-050047 This reference design features charging up to 20 V at 5 A without the need for any external FETs, enabling a much smaller solution size and reducing total BOM cost. A microprocessor is also not necessary as the TPS25750 power delivery (PD) controller will handle the I2C communication to the BQ25792 (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
VQFN (RSM) 32 View options
WQFN (RJK) 38 View options

Ordering & quality

Information included:
  • RoHS
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​