Startseite Schnittstelle Andere Schnittstellen

LM2512A

AKTIV

Serializer für Mobile Pixel Link (MPL-1), 24 Bit, RGB-Display, mit optionalem Dithering & Nachschlag

Produktdetails

Protocols Catalog Rating Catalog Operating temperature range (°C) -30 to 85
Protocols Catalog Rating Catalog Operating temperature range (°C) -30 to 85
NFBGA (NZK) 49 16 mm² 4 x 4 X2QFN (NJM) 40 36 mm² 6 x 6
  • 24-bit RGB Interface Support up to 640 x 480 VGA Format
  • Optional 24 to 18-bit Dithering
  • Optional Look Up Table for Independent Color Correction
  • MPL-1 Physical Layer
  • SPI Interface for Look Up Table Control and Loading
  • Low Power Consumption & Powerdown State
  • Level Translation Between Host and Display
  • Optional Auto Power Down on STOP PCLK
  • Frame Sequence Bits Auto Resync upon Data or Clock Error
  • 1.6V to 2.0V Core / Analog Supply Voltage
  • 1.6V to 3.0V I/O Supply Voltage Range

System Benefits

  • Dithered Data Reduction
  • Independent RGB Color Correction
  • 24-bit Color Input
  • Small Interface, Low Power and Low EMI
  • Intrinsic Level Translation

All trademarks are the property of their respective owners.

  • 24-bit RGB Interface Support up to 640 x 480 VGA Format
  • Optional 24 to 18-bit Dithering
  • Optional Look Up Table for Independent Color Correction
  • MPL-1 Physical Layer
  • SPI Interface for Look Up Table Control and Loading
  • Low Power Consumption & Powerdown State
  • Level Translation Between Host and Display
  • Optional Auto Power Down on STOP PCLK
  • Frame Sequence Bits Auto Resync upon Data or Clock Error
  • 1.6V to 2.0V Core / Analog Supply Voltage
  • 1.6V to 3.0V I/O Supply Voltage Range

System Benefits

  • Dithered Data Reduction
  • Independent RGB Color Correction
  • 24-bit Color Input
  • Small Interface, Low Power and Low EMI
  • Intrinsic Level Translation

All trademarks are the property of their respective owners.

The LM2512A is a MPL Serializer (SER) that performs a 24-bit to 18-bit Dither operation and serialization of the video signals to Mobile Pixel link (MPL) levels on only 3 or 4 active signals. An optional Look Up Table (Three X 256 X 8 bit RAM) is also provided for independent color correction. 18-bit Bufferless or partial buffer displays from QVGA (320 x 240) up to VGA (640 x 480) pixels can utilize a 24-bit video source.

The interconnect is reduced from 28 signals to only 3 or 4 active signals with the LM2512A and companion deserializer easing flex interconnect design, size constraints and cost.

The LM2512A SER resides by the application, graphics or baseband processor and translates the wide parallel video bus from LVCMOS levels to serial Mobile Pixel Link levels for transmission over a flex cable (or coax) and PCB traces to the DES located near or in the display module.

When in Power_Down, the SER is put to sleep and draws less than 10μA. The link can also be powered down by stopping the PCLK (DES dependant) or by the PD* input pins.

The LM2512A provides enhanced AC performance over the LM2512. It implements the physical layer of the MPL-1 and uses a single-ended current-mode transmission.

The LM2512A is a MPL Serializer (SER) that performs a 24-bit to 18-bit Dither operation and serialization of the video signals to Mobile Pixel link (MPL) levels on only 3 or 4 active signals. An optional Look Up Table (Three X 256 X 8 bit RAM) is also provided for independent color correction. 18-bit Bufferless or partial buffer displays from QVGA (320 x 240) up to VGA (640 x 480) pixels can utilize a 24-bit video source.

The interconnect is reduced from 28 signals to only 3 or 4 active signals with the LM2512A and companion deserializer easing flex interconnect design, size constraints and cost.

The LM2512A SER resides by the application, graphics or baseband processor and translates the wide parallel video bus from LVCMOS levels to serial Mobile Pixel Link levels for transmission over a flex cable (or coax) and PCB traces to the DES located near or in the display module.

When in Power_Down, the SER is put to sleep and draws less than 10μA. The link can also be powered down by stopping the PCLK (DES dependant) or by the PD* input pins.

The LM2512A provides enhanced AC performance over the LM2512. It implements the physical layer of the MPL-1 and uses a single-ended current-mode transmission.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet MPL-1 24-Bit RGB Display I/F Serializer w/ Optional Dithering & Look Up Table datasheet (Rev. B) 02 Mai 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
NFBGA (NZK) 49 Ultra Librarian
X2QFN (NJM) 40 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos