TLV803
3-polige Spannungsüberwachung (Reset-IC) mit Aktiv-Low- und Open-Drain-Reset
TLV803
- 3-Pin SOT23 Package
- Supply Current: 9 µA (Typical)
- Precision Supply Voltage Monitor: 2.5 V, 3 V, 3.3 V, 5 V
- Power-On Reset Generator with Fixed Delay Time of 200 ms
- Pin-for-Pin Compatible with MAX803
- Temperature Range: –40°C to +125°C
- Open-Drain, RESET Output
The TLV8x3 family of supervisory circuits provides circuit initialization and timing supervision, primarily for DSPs and processor-based systems.
The TLV803, TLV853, and TLV863 are functionally equivalent. The TLV853 and TLV863 provide an alternate pinout of the TLV803. The newer TLV803E device is a pin-to-pin alternative to all of these 3.
During power on, RESET asserts when the supply voltage (VDD) exceeds 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time (td(typ) = 200 ms) starts after VDD exceeds the threshold voltage, VIT. When the supply voltage drops below the VIT threshold voltage, the output is active (low) again. All the devices in this family have a fixed sense-threshold voltage (VIT) set by an internal voltage divider.
The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. These devices are available in a 3-pin SOT-23 package. The TLV803 devices are characterized for operation over a temperature range of –40°C to +125°C.
Technische Dokumentation
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
ADS114S08EVM — ADS114S08-Evaluierungsmodul
The ADS114S08 evaluation module (EVM) is a platform for evaluation of the ADS114S08 analog-to-digital converter (ADC). The ADS114S08 is a 16-bit, 4-kSPS, 12-channel, low-power delta-sigma ADC for sensor measurement and process control applications. The ADS114S08 also includes a highly-accurate (...)
ADS122C04EVM — ADS122C04-Evaluierungsmodul
The ADS122C04 evaluation module (EVM) is a platform for evaluating the ADS122C04 analog-to-digital converter (ADC). The ADS122C04 is a 24-bit, 2-kSPS, 4-channel, low-power delta-sigma ADC with an I2C interface for sensor measurement and process control applications. The ADS122C04 also includes an (...)
TLV803SEVM-019 — TLV803 3-polige Spannungsüberwachung mit Aktiv-Low-Open-Drain-Reset – Evaluierungsmodul
TIDCBC1 — TIDA-00447 Firmware
Unterstützte Produkte und Hardware
Produkte
Überwachungs- & Rücksetz-ICs
TIDCC99 — TIDM-TM4C123XSUB1GHZ Project Source Software
Unterstützte Produkte und Hardware
Produkte
Überwachungs- & Rücksetz-ICs
TLV803M Unencrypted PSpice Transient Model Package (Rev. A)
TLV803R Unencrypted PSpice Transient Model Package (Rev. A)
TLV803S Unencrypted PSpice Transient Model Package (Rev. A)
TLV803Z Unencrypted PSpice Transient Model Package (Rev. A)
Driving Stepper Motor with High Performance MCU Assembly Drawing (from DRV8833)
Driving a Stepper Motor with High Performance MCU CAD Files (from DRV8833)
Driving a Stepper Motor with High Performance MCU CAD FIles (from EK-TM4C123GXL)
Driving a Stepper Motor with High Performance MCU PCB (from DRV8833)
PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool
TIDEP0040 — Referenzdesign für OMAPL-138-basierte Hardware/Software für Software Defined Radio (SDR)
TIDA-00447 — Referenzdesign für sensorlosen Doppelantrieb von bürstenlosen Gleichstrommotoren, 24 V, 100 W/30 W
TIDA-01568 — Referenzdesign für Stromversorgungssequenzierung mit 12mm x 12mm, 5 Schienen für Anwendungsprozessor
TIDEP0020 — Referenzdesign zur diskreten Stromversorgung mit dem AM437x
TIDM-TM4C123XSUB1GHZ — Referenzdesign für WLAN-fähigen IoT-Knoten (Sub-1 GHz) mit Hochleistungs-Mikrocontroller
TIDM-TM4C123STEPPERMOTOR — Referenzdesign zur Ansteuerung eines Schrittmotors mit einem Hochleistungs-Mikrocontroller
TIDA-00641 — Hochauflösender Dual-Mikroschritt-Treiber – Referenzdesign
TIDEP0038 — Referenzdesign für OMAPL-138-basierte Hardware/Software zur Sichtanalytik
Gehäuse | Pins | Herunterladen |
---|---|---|
SOT-23 (DBZ) | 3 | Optionen anzeigen |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.