Inicio Interfaz Transceptores CAN

TCAN1146-Q1

ACTIVO

Transceptor CAN FD autom. c/ vigilancia, diagn. de bus y conexión a red parcial vía activ. select

Detalles del producto

Features Inhibit, Partial networking, Sleep, Wake Architecture 12V, 24V Bus fault voltage (V) -58 to 58 Protocols CAN, CAN FD Supply voltage (VCC) (V) 4.5V to 5.5V I/O supply voltage (V) 1.8, 3.3, 5 Signaling rate (max) (Mbps) 5 Number of channels 1 Rating Automotive
Features Inhibit, Partial networking, Sleep, Wake Architecture 12V, 24V Bus fault voltage (V) -58 to 58 Protocols CAN, CAN FD Supply voltage (VCC) (V) 4.5V to 5.5V I/O supply voltage (V) 1.8, 3.3, 5 Signaling rate (max) (Mbps) 5 Number of channels 1 Rating Automotive
SOT-23-THN (DYY) 14 13.692 mm² (4.2 mm × 3.26 mm) VSON (DMT) 14 13.5 mm² (4.5 mm × 3 mm) SOIC (D) 14 51.9 mm² (8.65 mm × 6 mm)

The TCAN114x-Q1 is a family of enhanced high-speed, CAN FD transceivers supporting data rates up to 5 Mbps. The devices are configured using serial peripheral interface (SPI) for access to full functionality. The TCAN114x-Q1 supports nominal processor IO voltages from 1.8 V to 5 V by applying the appropriate voltage to the VIO pin, allowing lower power processors to be used.

The TCAN1145-Q1 and TCAN1146-Q1 transceivers support selective wake (being able to wake-up based on WUF identification). This feature enables systems to implement partial networking and operate with a reduced number of nodes in an active state while the remaining nodes are in a low-power sleep mode). The transceivers and selective wake function meet the specifications of the ISO 11898-2:2016 standard.

The TCAN1144-Q1 and TCAN1146-Q1 are full featured devices supporting watchdog and advanced bus diagnostics. For ease of debug, the advanced bus fault diagnostics and communication feature can be used to determine specific bus faults.

The TCAN114x-Q1 is a family of enhanced high-speed CAN FD transceivers that are register compatible enabling system designers the flexibility to implement features needed without hardware modifications and with minimal software changes. The TCAN1144-Q1 and TCAN1146-Q1 inhibit (INH) pin can be used to either enable node power or be configured as a limp home pin when a watchdog error takes place.

The TCAN114x-Q1 is a family of enhanced high-speed, CAN FD transceivers supporting data rates up to 5 Mbps. The devices are configured using serial peripheral interface (SPI) for access to full functionality. The TCAN114x-Q1 supports nominal processor IO voltages from 1.8 V to 5 V by applying the appropriate voltage to the VIO pin, allowing lower power processors to be used.

The TCAN1145-Q1 and TCAN1146-Q1 transceivers support selective wake (being able to wake-up based on WUF identification). This feature enables systems to implement partial networking and operate with a reduced number of nodes in an active state while the remaining nodes are in a low-power sleep mode). The transceivers and selective wake function meet the specifications of the ISO 11898-2:2016 standard.

The TCAN1144-Q1 and TCAN1146-Q1 are full featured devices supporting watchdog and advanced bus diagnostics. For ease of debug, the advanced bus fault diagnostics and communication feature can be used to determine specific bus faults.

The TCAN114x-Q1 is a family of enhanced high-speed CAN FD transceivers that are register compatible enabling system designers the flexibility to implement features needed without hardware modifications and with minimal software changes. The TCAN1144-Q1 and TCAN1146-Q1 inhibit (INH) pin can be used to either enable node power or be configured as a limp home pin when a watchdog error takes place.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TCAN1145-Q1 ACTIVO Transceptor CAN FD con conexión a red parcial mediante activación selectiva de calidad automotriz Without advanced bus fault diagnostics
Funcionalidad similar a la del dispositivo comparado
NUEVO TCAN1576-Q1 ACTIVO Transceptor CAN automotriz con capacidad de mejora de la señal, conexión en red parcial y vigilancia Higher signaling rate (8Mbps), CAN FD + Signal Improvement Capable (SIC)

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 10
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TCAN114x-Q1 Enhanced CAN FD Transceiver with Partial Networking datasheet (Rev. B) PDF | HTML 23/03/2022
Nota sobre la aplicación Comparison of CAN, CAN FD, and CAN XL PDF | HTML 18/06/2026
Application brief Simplify the Design of Isolated CAN with Selective Wake ECUs PDF | HTML 18/04/2023
Nota sobre la aplicación How Selective Wake Enables Partial Networking (Rev. B) PDF | HTML 22/06/2022
Nota sobre la aplicación Protecting Automotive CAN Bus Systems From ESD Overvoltage Events PDF | HTML 27/04/2022
Guía del usuario Q&A Watchdog Overview and Configuration PDF | HTML 3/06/2021
Artículo técnico How selective wake CAN transceivers enable lower power consumption in automotive d PDF | HTML 22/02/2021
Información sobre seguridad funcional TCAN114x-Q1 Functional Safety Analysis Report PDF | HTML 19/10/2020
Información sobre seguridad funcional TCAN114x-Q1 Functional Safety Report PDF | HTML 19/10/2020
Información sobre seguridad funcional TCAN114x-Q1 Functional Safety Manual PDF | HTML 4/03/2020

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TCAN-SOIC14-EVM — Módulo de evaluación CAN universal de circuito integrado de contorno pequeño de 14 pines

El módulo de evaluación CAN universal de circuito integrado de contorno pequeño de 14 pines (EVM) ofrece a los usuarios la posibilidad de evaluar todas las familias de transceptores CAN de 14 pines de TI. El EVM CAN universal de 14 pines se puede configurar para su uso con todas las familias de (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

TCAN1145EVM — TCAN1145-Q1 Transceptor CAN con vigilancia y módulo de evaluación de red parcial

Este EVM se puede utilizar para evaluar la familia de dispositivos TLIN114x. Se puede acceder fácilmente al bus CAN a través de puntos de prueba, el cabezal J7 y un conector DSUB9, estándar en muchas aplicaciones de automoción para cableado. Todos los pines están disponibles a través de cabezales (...)
Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-23-THN (DYY) 14 Ultra Librarian
VSON (DMT) 14 Ultra Librarian
SOIC (D) 14 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos