Inicio Interfaz Circuitos integrados USB Concentradores y controladores USB
Inicio
Interfaz
Circuitos integrados USB
Concentradores y controladores USB

TUSB1211

OBSOLETO

Transceptor OTG USB 2.0 de alta velocidad de 480 Mbps compatible con BC 1.2

Haga su pedido ahora
Hoja de datos

TUSB1211

OBSOLETO
Hoja de datos Haga su pedido ahora

Detalles del producto

Function USB2 USB speed (Mbps) 480 Type Transceiver Rating Catalog Operating temperature range (°C) -40 to 85
Function USB2 USB speed (Mbps) 480 Type Transceiver Rating Catalog Operating temperature range (°C) -40 to 85
JRBGA (ZRQ) 36 12.25 mm² 3.5 x 3.5
  • USB2.0 PHY Transceiver Chip, Designed to
    Interface With a USB Controller Through a ULPI
    Interface, Fully Compliant With:
    • Universal Serial Bus Specification Rev. 2.0
    • On-The-Go Supplement to the USB 2.0
      Specification       Rev. 1.3
    • UTMI+ Low Pin Interface (ULPI) Specification
      Rev. 1.1
  • DP/DM Line External Component Compensation
    (Patent #US7965100 B1)
  • Interfaces to Host, Peripheral, and OTG Device
    Cores; Optimized for Portable Devices or System
    ASICs With Built-in USB OTG Device Core
  • Complete USB OTG Physical Front-End
  • USB Battery Charger Detection Feature
  • USB HS Start-of-Frame Clock Output Feature
    Available on SOF Pin Can be Used to Synchronize
    Another Application, for Example Audio, With the
    USB Packet Stream
  • ULPI Interface:
    • I/O Interface (1.8 V) Optimized for Non-
      Terminated 50-Ω Line Impedance
    • ULPI CLOCK Pin (60 MHz) Supports Both Input
      and Output Clock Configurations
    • Fully Programmable ULPI-Compliant Register Set
  • Full Industrial-Grade Operating Temperature
    Range from –40°C to 85°C
  • Available in a TFBGA36 Ball Package
  • USB2.0 PHY Transceiver Chip, Designed to
    Interface With a USB Controller Through a ULPI
    Interface, Fully Compliant With:
    • Universal Serial Bus Specification Rev. 2.0
    • On-The-Go Supplement to the USB 2.0
      Specification       Rev. 1.3
    • UTMI+ Low Pin Interface (ULPI) Specification
      Rev. 1.1
  • DP/DM Line External Component Compensation
    (Patent #US7965100 B1)
  • Interfaces to Host, Peripheral, and OTG Device
    Cores; Optimized for Portable Devices or System
    ASICs With Built-in USB OTG Device Core
  • Complete USB OTG Physical Front-End
  • USB Battery Charger Detection Feature
  • USB HS Start-of-Frame Clock Output Feature
    Available on SOF Pin Can be Used to Synchronize
    Another Application, for Example Audio, With the
    USB Packet Stream
  • ULPI Interface:
    • I/O Interface (1.8 V) Optimized for Non-
      Terminated 50-Ω Line Impedance
    • ULPI CLOCK Pin (60 MHz) Supports Both Input
      and Output Clock Configurations
    • Fully Programmable ULPI-Compliant Register Set
  • Full Industrial-Grade Operating Temperature
    Range from –40°C to 85°C
  • Available in a TFBGA36 Ball Package

The TUSB1211 device is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps and low-speed 1.5 Mbps), and is compliant to both Host and Peripheral modes. The TUSB1211 also supports a UART mode and legacy ULPI serial modes.

The TUSB1211 device supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including Host Negotiation Protocol (HNP) and Session Request Protocol (SRP). TUSB1211 also supports USB Battery Charging Specification Ver1.1 integrating a charger detection module for sensing and control on DP/DM lines, and ACA (Accessory Charger Adapter) detection and control on ID line.

The DP/DM external component compensation in the transmitter compensates for variations in the series impendence to match with the data line impedance and the receiver input impedance, to limit data reflections and, thereby, improve eye diagrams.

The TUSB1211 device is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps and low-speed 1.5 Mbps), and is compliant to both Host and Peripheral modes. The TUSB1211 also supports a UART mode and legacy ULPI serial modes.

The TUSB1211 device supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including Host Negotiation Protocol (HNP) and Session Request Protocol (SRP). TUSB1211 also supports USB Battery Charging Specification Ver1.1 integrating a charger detection module for sensing and control on DP/DM lines, and ACA (Accessory Charger Adapter) detection and control on ID line.

The DP/DM external component compensation in the transmitter compensates for variations in the series impendence to match with the data line impedance and the receiver input impedance, to limit data reflections and, thereby, improve eye diagrams.
filter Buscar otro/a Concentradores y controladores USB
Descargar

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet TUSB1211 Stand-Alone USB Transceiver Chip datasheet (Rev. B) PDF | HTML 30 jun 2015

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje