PTN04050C
- Up to 12 W Output Power
- Wide Input Voltage Range
(2.95 V to 5.5 V) - Wide Output Voltage Adjust
(5 V to 15 V) - High Efficiency (Up to 90%)
- Operating Temperature: –40°C to 85°C
- Surface Mount Package Available
- APPLICATIONS
- Telecommunications, Instrumentation,
and General-Purpose Applications
- Telecommunications, Instrumentation,
The PTN04050C is a 4-pin boost-voltage regulator product. In new designs it should be considered in place of the PT5040 series of positive step-up products. The PTN04050C is smaller and lighter than its predecessors, and has either similar or improved electrical performance characteristics. The case-less, double-sided package, also exhibits improved thermal characteristics, and is compatible with TI's roadmap for RoHS and lead-free compliance.
Operating over a 2.95V to 5.5V input range, the PTN04050C provides high-efficiency, step-up voltage conversion for loads of up to 12W. The output voltage is set using a single external resistor. The PTN04050C may be set to any value within the range, 5V to 15V. The output voltage of the PTN04050C can be as little as 0.5V higher than the input, allowing an output voltage of 5V, with an input voltage of 4.5V.
The PTN04050C modules are suited to a wide variety of general-purpose applications that operate off 3.3-V or 5-V dc power.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | 12-W 3.3/5-V Input Wide Output Adjustable Boost Converter datasheet (Rev. A) | 2011/02/10 | |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Application note | High-Temperatures Soldering Requirements for Plug-in Power, Surface-Mount Pdts (Rev. A) | 2009/08/13 | ||
| Analog Design Journal | Wide-input dc/dc modules offer maximum design flexibility | 2006/04/18 | ||
| Analog Design Journal | New power modules improve surface-mount manufacturability | 2005/07/14 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| DIPMODULE (EUU) | 4 | 옵션 보기 |
| DIPMODULE (EUV) | 4 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치