홈 전력 관리 LED 드라이버 조명 LED 드라이버

TPS922152

미리 보기

제품 상세 정보

Input voltage type DC/DC Topology Buck Vin (min) (V) 4.5 Vin (max) (V) 200 Iout (max) (A) 20 Features Controller, Cycle-by-cycle over-current protection, LED Open Detection, LED Short Detection Operating temperature range (°C) -40 to 125 Dimming method Analog, PWM Number of channels 1 Rating Catalog
Input voltage type DC/DC Topology Buck Vin (min) (V) 4.5 Vin (max) (V) 200 Iout (max) (A) 20 Features Controller, Cycle-by-cycle over-current protection, LED Open Detection, LED Short Detection Operating temperature range (°C) -40 to 125 Dimming method Analog, PWM Number of channels 1 Rating Catalog
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • Wide application voltage up to 200V
  • 4.5V to 15V input voltage range
  • LED common Anode connection
  • Adjustable switching frequency: 50kHz-1MHz
  • Adaptive Off-Time mode
  • Advanced dimming options:
    • Analog dimming (1000:1)
    • PWM dimming (50ns pulse width, 1000:1 at 20kHz)
    • Flexible dimming (20,000:1 at 20kHz PWM)
  • Low Standby current
  • Full protection features:
    • LED open and short protection
    • Cycle-by-cycle current limit
    • Sense resistor open and short protection
    • Fault output
  • Package: SOIC-8
  • Wide application voltage up to 200V
  • 4.5V to 15V input voltage range
  • LED common Anode connection
  • Adjustable switching frequency: 50kHz-1MHz
  • Adaptive Off-Time mode
  • Advanced dimming options:
    • Analog dimming (1000:1)
    • PWM dimming (50ns pulse width, 1000:1 at 20kHz)
    • Flexible dimming (20,000:1 at 20kHz PWM)
  • Low Standby current
  • Full protection features:
    • LED open and short protection
    • Cycle-by-cycle current limit
    • Sense resistor open and short protection
    • Fault output
  • Package: SOIC-8

The TPS922152 is a non-synchronous, Average-Current control Buck LED driver with a wide bus voltage range of 4.5V to 200V. It utilizes Adaptive Off-Time (AOT) mode to drive external switching FETs, ensuring low LED current ripple and fast transient response even with a small output capacitor. The switching frequency is configurable from 50kHz to 1MHz, supporting single-layer PCB design and common anode configurations.

For dimming, the TPS922152 supports high-accuracy analog dimming via the ADIM pin, achieving a dimming ratio of up to 1000:1 using unique corrective sensing technology. For PWM dimming, the PDIM pin uses proprietary Inductive Fast Dimming (IFD) to provide high-frequency, high-ratio control with high precision. Additionally, the device integrates comprehensive protection features, including LED open/short and sense resistor open/short protection.

The TPS922152 is a non-synchronous, Average-Current control Buck LED driver with a wide bus voltage range of 4.5V to 200V. It utilizes Adaptive Off-Time (AOT) mode to drive external switching FETs, ensuring low LED current ripple and fast transient response even with a small output capacitor. The switching frequency is configurable from 50kHz to 1MHz, supporting single-layer PCB design and common anode configurations.

For dimming, the TPS922152 supports high-accuracy analog dimming via the ADIM pin, achieving a dimming ratio of up to 1000:1 using unique corrective sensing technology. For PWM dimming, the PDIM pin uses proprietary Inductive Fast Dimming (IFD) to provide high-frequency, high-ratio control with high precision. Additionally, the device integrates comprehensive protection features, including LED open/short and sense resistor open/short protection.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TPS922152 Average-Current Buck LED Driver with Wide Input Range, 0.1% Analog Dimming Ratio and Inductive Fast PWM Dimming datasheet (Rev. A) PDF | HTML 2026. 9. 24

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS922152EVM — TPS922152 평가 모듈

텍사스 인스트루먼트의 TPS922152EVM 평가 모듈(EVM)은 설계자가 벅 LED(발광 다이오드) 드라이버인 TPS922152의 작동과 성능을 평가하는 데 도움이 됩니다. TPS922152EVM은 4.5V~15V의 입력 전압 범위와 60V 버스 전압에서 작동하며, 외부 LED 부하를 구동하기 위해 기본적으로 5A의 정전류를 제공합니다.
사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
SOIC (D) 8 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상