開發模組 (EVM) 的 GUI
PMBUSMGRGUI-SW — LM25066, LM5066, LM5064, LM25056 PMBus Manager GUI
Companion GUI for evaluation boards supporting: LM25066, LM5066, LM5064 Hot Swap + telemetry devices and the LM25056 telemetry-only device
LM5066
- 10- to 80-V Operation
- 100-V Continuous Absolute Max
- 26 mV (±12%) or 50 mV (±6%) ILIM Threshold
- Programmable FET SOA Protection
- Programable UV, OV, tFAULT Thresholds
- External FET Temperature Sensing
- Failed FET Detection
- I2C / SMBus Interface
- PMBus™ Compliant Command Structure
- Precision V IN, VOUT, IIN, PIN, VAUX Monitoring
- V (±2.7%); I (±3%); P (±4.5%)
- Programable I/V/P Averaging Interval
- 12-bit ADC with 1-kHz Sampling Rate
- –40°C < TJ < 125°C Operation
- Pin-to-Pin Compatible with LM5066I
LM5066 provides robust protection and precision monitoring for 10- to 80-V systems. Programmable UV, OV, ILIMIT, and fast-short circuit protection allow for customized protection for any application. Programmable FET SOA protection sets the maximum power the FET is allowed to dissipate under any condition. The programmable fault timer (tFAULT) is set to avoid nuisance trips, ensure start-up, and limit the duration of over load events.
In addition to circuit protection, the LM5066 supplies real-time power, voltage, current, temperature, and fault data to the system management host through the I2C / SMBus interface. PMBus compliant command structure makes it easy to program the device. Precision telemetry enables intelligent power management functions such as efficiency optimization and early fault detection. LM5066 also supports advanced features such as I/V/P averaging and peak power measurment to improve system diagnostics.
LM5066I is pin-to-pin compatible with the LM5066 and offers improved telemetry accuracy and supports the Read_Ein command to monitor energy.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | LM5066 10 to 80 V, Hotswap Controller With I/V/P Monitoring and PMBus Interface datasheet (Rev. I) | PDF | HTML | 2016年 1月 26日 |
| Application note | Implementation of PSYS Monitor Using TPS25984, TPS25985, or TPS25990 eFuses | PDF | HTML | 2023年 11月 15日 | |
| E-book | 11 Ways to Protect Your Power Path | 2019年 7月 3日 | ||
| Application note | Basics of Power Switches (Rev. A) | PDF | HTML | 2019年 4月 26日 | |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018年 6月 25日 | ||
| Technical article | Simplify digital hot swap design using the PI-Commander GUI | PDF | HTML | 2016年 6月 6日 | |
| Application note | Handling System Transients in Hot Swap Applications | 2015年 5月 8日 | ||
| Application note | Robust Hot Swap Design (Rev. A) | 2015年 4月 8日 | ||
| User guide | AN-2160 LM5066 Evaluation Board (Rev. A) | 2013年 4月 26日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
LM5066EVK — LM5066 評估套件
The LM5066EVK evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM5066 hot-swap controller with PMBUS compliant SMBUS/I2C interface to accurately measure, protect and control the electrical operating conditions of systems connected to a backplane power bus. The EVM (...)
使用指南: PDF
開發模組 (EVM) 的 GUI
SLVC572 — PI-Commander EVM GUI
支援產品和硬體
產品
eFuses 和熱插拔制器
供電設備
硬體開發
開發板
計算工具
TVS-RECOMMENDATION-CALC — TVS diode recommendation tool
This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
| 封裝 | 引腳 | 下載 |
|---|---|---|
| HTSSOP (PWP) | 28 | 檢視選項 |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。