首頁 電源管理 LED 驅動器 RGB LED 驅動器
首頁
電源管理
LED 驅動器
RGB LED 驅動器
最新

LP5814

現行

具有自動動畫控制的 4 通道 I2C 介面 RGBW LED 驅動器

立即訂購
產品規格表

LP5814

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 4 LED current per channel (mA) 50 LED configuration Parallel Program memory Yes Topology Linear Programmable ramp control Yes Vin (min) (V) 2.5 Vin (max) (V) 5.5 Iout (max) (A) 0.2 Features Analog/PWM mixed dimming, Constant current, I2C control, Programmable lighting engines, Thermal shutdown Iq (typ) (mA) 0.15 Shutdown current (ISD) (typ) (µA) 0.1 Operating temperature range (°C) -40 to 125 Rating Catalog
Number of channels 4 LED current per channel (mA) 50 LED configuration Parallel Program memory Yes Topology Linear Programmable ramp control Yes Vin (min) (V) 2.5 Vin (max) (V) 5.5 Iout (max) (A) 0.2 Features Analog/PWM mixed dimming, Constant current, I2C control, Programmable lighting engines, Thermal shutdown Iq (typ) (mA) 0.15 Shutdown current (ISD) (typ) (µA) 0.1 Operating temperature range (°C) -40 to 125 Rating Catalog
DSBGA (YCH) 8 0.98 mm² 1.4 x 0.7 SOT-5X3 (DRL) 8 3.36 mm² 2.1 x 1.6
  • Operating voltage range
    • VCC range: 2.5V to 5.5V
    • Logic pins compatible with 1.8V, 3.3V, and 5V
    • Output voltage up to 5.5V
  • 4 constant current sinks with high precision
    • 0.1mA to 51mA per channel
    • Device-to-device error: ±8% (max.)
    • Channel-to-channel error: ±3% (max.)
    • Ultra-low headroom voltage: 135mV (max.) at 25.5mA; 275mV (max.) at 51mA
  • Ultra-low power consumption
    • Shutdown: ISD = 0.1µA (typ.)
    • Standby: ISTB = 22µA (typ.)
    • Active:
      • INOR = 0.15mA(typ.), when disable output channel
      • INOR = 0.23mA(typ.), LED current = 25.5mA
  • Analog dimming (current gain control)
    • Global 1-bit Maximum Current (MC) 25.5mA/51mA
    • Individual 8-bits Dot Current (DC) setting
  • PWM dimming up to audible-noise-free 23kHz
    • Individual 8-bits PWM dimming resolution
    • Linear or exponential dimming curves
  • Autonomous animation engine control
  • 1MHz (max.) I2C interface
  • ESD: 4kV HBM, 1.5kV CDM
  • Package
    • 1.6 x 2.1mm SOT583-8, 0.5mm pitch
    • 1.36 x 0.8mm DSBGA-8, 0.35mm pitch
  • –40°C to 125°C operating temperature range
  • Operating voltage range
    • VCC range: 2.5V to 5.5V
    • Logic pins compatible with 1.8V, 3.3V, and 5V
    • Output voltage up to 5.5V
  • 4 constant current sinks with high precision
    • 0.1mA to 51mA per channel
    • Device-to-device error: ±8% (max.)
    • Channel-to-channel error: ±3% (max.)
    • Ultra-low headroom voltage: 135mV (max.) at 25.5mA; 275mV (max.) at 51mA
  • Ultra-low power consumption
    • Shutdown: ISD = 0.1µA (typ.)
    • Standby: ISTB = 22µA (typ.)
    • Active:
      • INOR = 0.15mA(typ.), when disable output channel
      • INOR = 0.23mA(typ.), LED current = 25.5mA
  • Analog dimming (current gain control)
    • Global 1-bit Maximum Current (MC) 25.5mA/51mA
    • Individual 8-bits Dot Current (DC) setting
  • PWM dimming up to audible-noise-free 23kHz
    • Individual 8-bits PWM dimming resolution
    • Linear or exponential dimming curves
  • Autonomous animation engine control
  • 1MHz (max.) I2C interface
  • ESD: 4kV HBM, 1.5kV CDM
  • Package
    • 1.6 x 2.1mm SOT583-8, 0.5mm pitch
    • 1.36 x 0.8mm DSBGA-8, 0.35mm pitch
  • –40°C to 125°C operating temperature range

The LP5814 is a 4-channel RGBW LED driver with autonomous animation engine control. The device has ultra-low operation current with 0.1µA (typical) in shutdown mode, 0.1mA (typical) when enable device and 0.2mA (typical) when illuminate LEDs.

Both analog dimming and PWM dimming methods are adopted to achieve powerful dimming performance. The output current of each LED can be adjusted with 256 steps from 0.1mA to 25.5mA or 0.2mA to 51mA. The 8-bits PWM generator enables smooth and audible-noise-free dimming control for LED brightness.

The autonomous animation engine can significantly reduce the real-time loading of controller. Each LED can be configured through the related registers to realize vivid and fancy lighting effects.

The LP5814 is a 4-channel RGBW LED driver with autonomous animation engine control. The device has ultra-low operation current with 0.1µA (typical) in shutdown mode, 0.1mA (typical) when enable device and 0.2mA (typical) when illuminate LEDs.

Both analog dimming and PWM dimming methods are adopted to achieve powerful dimming performance. The output current of each LED can be adjusted with 256 steps from 0.1mA to 25.5mA or 0.2mA to 51mA. The 8-bits PWM generator enables smooth and audible-noise-free dimming control for LED brightness.

The autonomous animation engine can significantly reduce the real-time loading of controller. Each LED can be configured through the related registers to realize vivid and fancy lighting effects.
filter 尋找其它 RGB LED 驅動器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet LP5814 4-Channel I2C Interface RGBW LED Driver with Auto Animation Control datasheet 2025年 3月 5日
Certificate LP5814YCHEVM EU Declaration of Conformity (DoC) 2025年 7月 11日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LP5814DRLEVM — LP5814 評估模組

LP5814 評估模組 (EVM) 展示了 LP5814 四通道 LED 驅動器的功能。提供 LP581x_RUKA 圖形使用者介面 (GUI)，透過 USB2ANY 介面轉接器控制所有系列裝置 LP5814/4I/5/6/7。
使用指南: PDF | HTML
TI.com 無法提供
開發板

LP5814YCHEVM — 具有 4 通道 I2C 介面 RGB LED 驅動器和自動動畫控制功能的 LP5814 評估模組

LP5814DRLEVM 和 LP5814YCHEVM 評估模組 (EVM) 可協助設計師評估 LP5814、LP5814I 及 LP5816 的功能。LP5815DRLEVM 和 LP5815YCHEVM 可協助設計師評估 LP5815 和 LP5817 的功能。提供 LP581x_RUKA 圖形使用者介面 (GUI)，並透過 USB2ANY 介面轉接器控制所有系列裝置，包括 LP5814、LP5814I、LP5815、LP5816 及 LP5817。
使用指南: PDF | HTML
TI.com 無法提供
開發模組 (EVM) 的 GUI

LP581X-RUKA-GUI — LP581x_RUKA Graphical User Interface to control all the family devices LP5814/4I/5/6/7

LP581x_RUKA Graphical User Interface
支援產品和硬體

支援產品和硬體

產品
RGB LED 驅動器
LP5814 — 具有自動動畫控制的 4 通道 I2C 介面 RGBW LED 驅動器 LP5814I — 4-channel I2C interface RGBW LED driver with instant blinking and auto animation control LP5815 — 具有即時閃爍及自動動畫控制功能的 3 通道 I2C 介面 RGB LED 驅動器 LP5816 — 4 通道 I2C 介面 RGBW LED 驅動器 LP5817 — 3 通道 I2C 介面 RGB LED 驅動器
硬體開發
開發板
LP5814DRLEVM — LP5814 評估模組 LP5815DRLEVM — LP5815 評估模組 LP5814YCHEVM — 具有 4 通道 I2C 介面 RGB LED 驅動器和自動動畫控制功能的 LP5814 評估模組 LP5815YCHEVM — 具有 3 通道 I2C 介面 RGB LED 驅動器、充電指示燈及自動動畫功能的 LP5815 評估模組
啟動 下載選項
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YCH) 8 Ultra Librarian
SOT-5X3 (DRL) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片