首頁 介面 乙太網路 IC 乙太網路重定時器、訊號調節器和多工器緩衝器
首頁
介面
乙太網路 IC
乙太網路重定時器、訊號調節器和多工器緩衝器

SN65LVCP114

停產

具訊號調節的 14.2-Gbps 四多工器線性轉接驅動器

立即訂購
產品規格表

SN65LVCP114

停產
產品規格表 立即訂購

產品詳細資料

Type Mux Buffer Number of channels 8 Speed (max) (Gbpp) 14.2 Input compatibility AC-coupling Protocols Fibre Channel, General purpose Operating temperature range (°C) -40 to 85
Type Mux Buffer Number of channels 8 Speed (max) (Gbpp) 14.2 Input compatibility AC-coupling Protocols Fibre Channel, General purpose Operating temperature range (°C) -40 to 85
NFBGA (ZJA) 167 144 mm² 12 x 12
  • Quad 2:1 Mux and 1:2 Demux
  • Multi-Rate Operation up to 14.2 Gbps Serial Data
    Rate
  • Linear Receiver Equalization Which Increases
    Margin at System Level of Decision Feedback
    Equalizer
  • Bandwidth: 18 GHz, Typical
  • Per-Lane P/N Pair Inversion
  • Port or Single Lane Switching
  • Low Power: 150 mW/Channel, Typical
  • Loopback Mode on All Three Ports
  • I2C Control in Addition to GPIO
  • DIAG Mode That Outputs Data of Line Side Port
    to Both Fabric Side Ports
  • 2.5-V or 3.3-V Single Power Supply
  • PBGA Package 12-mm × 12-mm × 1-mm, 0.8-mm
    Terminal Pitch
  • Excellent Impedance Matching to 100-Ω PCB
    Transmission Lines
  • Small Package Size Provides Board Real Estate
    Saving
  • Adjustable Output Swing Provides Flexible EMI
    and Crosstalk Control
  • Low Power
  • Supports 10GBASE-KR Applications With Ability
    to Transparency for Link Training
  • Quad 2:1 Mux and 1:2 Demux
  • Multi-Rate Operation up to 14.2 Gbps Serial Data
    Rate
  • Linear Receiver Equalization Which Increases
    Margin at System Level of Decision Feedback
    Equalizer
  • Bandwidth: 18 GHz, Typical
  • Per-Lane P/N Pair Inversion
  • Port or Single Lane Switching
  • Low Power: 150 mW/Channel, Typical
  • Loopback Mode on All Three Ports
  • I2C Control in Addition to GPIO
  • DIAG Mode That Outputs Data of Line Side Port
    to Both Fabric Side Ports
  • 2.5-V or 3.3-V Single Power Supply
  • PBGA Package 12-mm × 12-mm × 1-mm, 0.8-mm
    Terminal Pitch
  • Excellent Impedance Matching to 100-Ω PCB
    Transmission Lines
  • Small Package Size Provides Board Real Estate
    Saving
  • Adjustable Output Swing Provides Flexible EMI
    and Crosstalk Control
  • Low Power
  • Supports 10GBASE-KR Applications With Ability
    to Transparency for Link Training

The SN65LVCP114 device is an asynchronous, protocol-agnostic, low-latency QUAD mux, linear-redriver optimized for use in systems operating at up to 14.2 Gbps. The device linearly compensates for channel loss in backplane and active-cable applications. The architecture of SN65LVCP114 linear-redriver is designed to work effectively with ASIC or FPGA products implementing digital equalization using decision feedback equalizer (DFE) technology. The SN65LVCP114 mux, linear-redriver preserves the integrity (composition) of the received signal, ensuring optimum DFE and system performance. The SN65LVCP114 provides a low-power mux-demux, linear-redriver solution while at the same time extending the effectiveness of DFE.

SN65LVCP114 is configurable through GPIO or an I2C interface.

A single 2.5-V or 3.3-V power supply supports the operation of the SN65LVCP114.

The SN65LVCP114 is packaged in a 12-mm × 12-mm × 1-mm PBGA package with 0.8-mm pitch.

The SN65LVCP114 has three ports; each port is a quad lane. The switch logic of SN65LVCP114 can be implemented to support a 2:1 MUX per lane, 1:2 DEMUX per lane, and independent lane switching. The receive equalization can be independently programmed for each of the ports. The SN65LVCP114 supports loopback on all three ports.

The SN65LVCP114 device is an asynchronous, protocol-agnostic, low-latency QUAD mux, linear-redriver optimized for use in systems operating at up to 14.2 Gbps. The device linearly compensates for channel loss in backplane and active-cable applications. The architecture of SN65LVCP114 linear-redriver is designed to work effectively with ASIC or FPGA products implementing digital equalization using decision feedback equalizer (DFE) technology. The SN65LVCP114 mux, linear-redriver preserves the integrity (composition) of the received signal, ensuring optimum DFE and system performance. The SN65LVCP114 provides a low-power mux-demux, linear-redriver solution while at the same time extending the effectiveness of DFE.

SN65LVCP114 is configurable through GPIO or an I2C interface.

A single 2.5-V or 3.3-V power supply supports the operation of the SN65LVCP114.

The SN65LVCP114 is packaged in a 12-mm × 12-mm × 1-mm PBGA package with 0.8-mm pitch.

The SN65LVCP114 has three ports; each port is a quad lane. The switch logic of SN65LVCP114 can be implemented to support a 2:1 MUX per lane, 1:2 DEMUX per lane, and independent lane switching. The receive equalization can be independently programmed for each of the ports. The SN65LVCP114 supports loopback on all three ports.
filter 尋找其它 乙太網路重定時器、訊號調節器和多工器緩衝器
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 日期
* Data sheet SN65LVCP114 14.2-Gbps Quad 1:2-2:1 Mux, Linear-Redriver With Signal Conditioning datasheet (Rev. A) PDF | HTML 2016年 4月 1日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點