首頁 電源管理 電源保護開關與控制器 eFuse（整合式熱插拔）
首頁
電源管理
電源保護開關與控制器
eFuse（整合式熱插拔）
最新

TPS1686

現行

9V to 80V, 16mΩ, 10A eFuse with accurate and fast current monitor

立即訂購
產品規格表

TPS1686

現行
產品規格表 立即訂購

產品詳細資料

Vabsmax_cont (V) 92 Vin (max) (V) 80 Vin (min) (V) 9 Current limit (max) (A) 10 Current limit (min) (A) 2 Features Current monitoring, Fault output, Over Current Protection, Overvoltage protection, Power good signal, Short-circuit protection, Soft-start, Thermal shutdown Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 16 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0005 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 92 Vin (max) (V) 80 Vin (min) (V) 9 Current limit (max) (A) 10 Current limit (min) (A) 2 Features Current monitoring, Fault output, Over Current Protection, Overvoltage protection, Power good signal, Short-circuit protection, Soft-start, Thermal shutdown Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 16 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0005 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
VQFN (NLM) 23 30 mm² 5 x 6
  • Input operating voltage range: 9V to 80V
    • 92V absolute maximum
    • Withstands negative voltages up to –5V at output
  • Integrated FET with low on resistance: RON = 16mΩ (typ)
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Adjustable overvoltage protection
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Precise load current monitoring
    • <3% error for >50% current
    • 1MHz bandwidth
  • Robust overcurrent protection
    • Circuit-breaker response
    • Adjustable threshold: 1A to 10A
    • Overcurrent protection accuracy: ±3% (typ)
    • Adjustable transient overcurrent timer (ITIMER) to support peak currents
  • Fast trip response to short-circuit events
  • Overtemperature protection (OTP) with analog die temperature monitor output (TEMP)
    • FET SOA: 0.8W√s
  • FET health monitoring and reporting
  • Fault indication pin (FLT )
  • Power Good indication pin (PGOOD)
  • UL 2367 recognition (planned)
  • IEC 62368-1 CB certification (planned)
  • Small footprint: QFN 6mm × 5mm
    • IPC9592B clearance for 60V
  • Input operating voltage range: 9V to 80V
    • 92V absolute maximum
    • Withstands negative voltages up to –5V at output
  • Integrated FET with low on resistance: RON = 16mΩ (typ)
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Adjustable overvoltage protection
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Precise load current monitoring
    • <3% error for >50% current
    • 1MHz bandwidth
  • Robust overcurrent protection
    • Circuit-breaker response
    • Adjustable threshold: 1A to 10A
    • Overcurrent protection accuracy: ±3% (typ)
    • Adjustable transient overcurrent timer (ITIMER) to support peak currents
  • Fast trip response to short-circuit events
  • Overtemperature protection (OTP) with analog die temperature monitor output (TEMP)
    • FET SOA: 0.8W√s
  • FET health monitoring and reporting
  • Fault indication pin (FLT )
  • Power Good indication pin (PGOOD)
  • UL 2367 recognition (planned)
  • IEC 62368-1 CB certification (planned)
  • Small footprint: QFN 6mm × 5mm
    • IPC9592B clearance for 60V

The TPS1686x is an integrated high current circuit protection and power management device. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short circuits and excessive inrush current. Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Output current limit level can be set by user as per system needs. A user adjustable overcurrent blanking timer allows systems to support transient peaks in the load current without tripping the eFuse. An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management such as Intel PSYS and PROCHOT to optimize server and data-center performance.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.

The TPS1686x is an integrated high current circuit protection and power management device. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short circuits and excessive inrush current. Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Output current limit level can be set by user as per system needs. A user adjustable overcurrent blanking timer allows systems to support transient peaks in the load current without tripping the eFuse. An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management such as Intel PSYS and PROCHOT to optimize server and data-center performance.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.
filter 尋找其它 eFuse（整合式熱插拔）
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TPS1686x 9V to 80V , 16mΩ, 10A Integrated Hotswap (eFuse) with Accurate and Fast Current Monitor datasheet (Rev. A) PDF | HTML 2025年 11月 3日
Certificate TPS1686-87EVM EU Declaration of Conformity (DoC) 2025年 6月 9日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

TPS1686 PSpice Transient Model

SLVMEQ6.ZIP (93 KB) - PSpice Model
下載
計算工具

TPS1686-CALC — TPS1686 Design Calculator

The design calculator allows customer to size the external peripheral components while designing with TPS1686 eFuse.
支援產品和硬體

支援產品和硬體

產品
eFuse（整合式熱插拔）
TPS1686 — 9V to 80V, 16mΩ, 10A eFuse with accurate and fast current monitor
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (NLM) 23 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片