TPS7B84-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- Junction temperature: –40°C to +150°C, TJ
- Input voltage range: 3 V to 40 V (42 V max)
- Output voltage range:
- Adjustable output: 1.2 V to 18 V
- Fixed output: 3.3 V and 5 V
- Output current: up to 150 mA
- Output voltage accuracy: ±0.75% (max)
- Low dropout voltage:
- 225 mV (max) at 150 mA (VOUT ≥ 3.3 V)
- Low quiescent current:
- 18 µA (typ)
- 4 µA (max) when disabled
- Excellent line transient response:
- ±2% VOUT deviation during cold-crank
- ±2% VOUT deviation (1-V/µs VIN slew rate)
- Stable with a 2.2-µF or larger capacitor
- Functional Safety-Capable
- Package options:
- DRB (8-pin VSON), RθJA: 50.8°C/W
- DCY (4-pin SOT-223), RθJA: 85.5°C/W
The TPS7B84-Q1 is a low-dropout linear regulator designed to connect to the battery in automotive applications. The device has an input voltage range extending to 40 V, which allows the device to withstand transients (such as load dump) that are anticipated in automotive systems. With only an 18-µA quiescent current, the device is an optimal solution for powering always-on components such as microcontrollers (MCUs) and controller area network (CAN) transceivers in standby systems.
The TPS7B84-Q1 has both fixed and adjustable output types. The wide output voltage range allows the device to generate the bias voltage for silicon carbide (SiC) gate drivers and microphones as well as power MCUs and processors.
The device has state-of-the-art transient response that allows the output to quickly react to changes in load or line (for example, during cold-crank conditions). Additionally, the device has a novel architecture that minimizes output overshoot when recovering from dropout. During normal operation, the device has a tight DC accuracy of ±0.75% over line, load, and temperature.
The device is available in both a SOT223 package and a small VSON package with wettable flanks that facilitates a compact printed circuit board (PCB) design. The low thermal resistance enables sustained operation despite significant dissipation across the device.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS7B84-Q1 150-mA, 40-V, Adjustable, Low-Dropout Regulator datasheet (Rev. A) | PDF | HTML | 2020年 11月 17日 |
| Functional safety information | TPS7B84-Q1 Functional Safety FIT Rate and FMD | 2020年 6月 9日 | ||
| EVM User's guide | TPS7B8401EVM Evaluation Module User's Guide (Rev. A) | 2020年 4月 3日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
MULTIPKGLDOEVM-823 — 支援 DBV、DRB、DRV 和 DQN 封裝的通用 LDO 線性穩壓器評估模組
MULTIPKGLDOEVM-823 評估模組 (EVM) 可協助您評估多種常用線性穩壓器封裝的運作與性能，以供電路應用使用。此特定 EVM 配置具有 DRB、DRV、DQN 和 DBV 元件封裝，能讓您焊接並評估低壓差 (LDO) 穩壓器。
TPS7B4255EVM-062 — 適用 70-mA、40-V 電壓追蹤低壓降 (LDO) 穩壓器的 TPS7B4255 評估模組
TPS7B4255EVM-062 評估模組 (EVM) 可用來評估 TPS7B4255-Q1 線性穩壓器的運作及性能，以在電路應用中使用。
此特定 EVM 配置包含適合汽車應用的 70-mA、高電壓、電壓追蹤、低壓降 (LDO) 穩壓器，以及適合超低寄生測量的板載負載暫態電路。該穩壓器可提供最高 70-mA 和 3-mV 追蹤公差，並具備高達 40 V 及 45 V 暫態的廣泛輸入電壓 (VIN) 範圍。為確保 TPS7B4255-Q1 的穩定性，請使用具小於 3-&Omega 等效串聯電阻 (ESR) 的 1-µF (或更大) 輸出電容器。
TPS7B8401EVM — TPS7B84-Q1 150-mA 低 IQ 高 PSRR LDO 電壓穩壓器評估模組
The TPS7B8401 evaluation module (EVM) is a platform for evaluating the operation and performance of the TPS7B84 family of linear regulators.
This particular EVM configuration contains a single wide-input-voltage, small-size, linear regulator for a wide range of applications. The regulator is capable (...)
TRKRLDOEVM-119 — 通用型低壓差 (LDO) 追蹤穩壓器評估模組
通用低壓差 (LDO) 追蹤器穩壓器評估模組 (EVM)，可用於評估 TI 搭載外部元件墊的追蹤器 LDO 裝置的運作及性能，以及最適合超低寄生量測的板載負載瞬態電路。此 EVM 適用於採用 DDA 及 D 封裝的追蹤器 LDO。
PMP23223 — 配備偏壓電源的智慧型隔離式閘極驅動器參考設計
UCC14240-Q1、UCC14141-Q1 和 UCC14341-Q1 皆屬於整合式偏壓電源的直接投入使用的替代產品，每個元件都具備不同的目標輸入電壓和輸出功率。
UCC14xxx-Q1 資訊：
- UCC14240-Q1
- 隔離：基本
- 輸入電壓 (V)：24 (21 至 27)
- 輸出電壓 (V)：25 (18 至 25)
- 功率輸出 (...)
| 封裝 | 引腳 | 下載 |
|---|---|---|
| SOT-223 (DCY) | 4 | 檢視選項 |
| VSON (DRB) | 8 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。