TPS7H4011-SP
- Total ionizing dose (TID) characterized
- Radiation hardness assurance (RHA) availability of up to 100krad(Si)
- Single-Event Effects (SEE)
characterized
- Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
- Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
- Input voltage range from 4.5V to 14V
- 12A maximum output current
- High efficiency (typical values
for VIN = 12V, VOUT = 3.3V, fSW = 500kHz)
- 91% (CFP), 91% (plastic) at 2A
- 87% (CFP), 88% (plastic) at 9A
- 85% (CFP), 86% (plastic) at 12A
- Integrated HS 45mΩ(CFP)/31mΩ(plastic) and LS 33mΩ(CFP)/27mΩ(plastic) MOSFETs (typ at 12V)
- Flexible switching frequency options:
- 100kHz to 1MHz, accurate (±15% or better), adjustable internal oscillator
- 100kHz to 1MHz external sync capability
- SYNC pins can be configured 90° out of phase to parallel up to 4 devices
- 0.6V ±0.67% (CFP), ±0.83% (plastic) voltage reference over line, temperature, and radiation
- Differential remote sensing
- Selectable current limit
- FAULT input pin for flexible fault management
- Monotonic start-up into prebiased outputs
- Adjustable slope compensation and soft-start
- Adjustable input enable and power-good output for power sequencing
- Power-good output monitor for undervoltage and overvoltage
- Supports inverting buck-boost topology
- Plastic packages outgas tested per ASTM E595
- Available in military (–55°C to 125°C) temperature range
The TPS7H4011 is a 14V, 12A synchronous buck converter optimized for use in a space environment. The peak current mode converter obtains high efficiency with good transient performance and reduced component count.
The wide voltage range of the TPS7H4011 enables it to be used as a point of load regulator to convert directly from a 12V or 5V rail. The output voltage start-up ramp is controlled by the SS_TR pin. Power sequencing is possible with the EN and PWRGD pins.
The device can be configured with up-to four devices in parallel without an external clock for increased current capabilities. Additionally, various features are included such as differential remote sensing, selectable current limit, a flexible fault input pin, and configurable compensation.
您可能會感興趣的類似產品
功能相似於所比較的產品。
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS7H4011EVM — 適用於 4.5V 至 14V 輸入、12A 同步降壓轉換器的 TPS7H4011-SEP 和 QMLP 評估模組
TPS7H4011 評估模組 (EVM) 可展示單一 TPS7H4011-SEP 降壓轉換器（塑膠封裝）的運作。電路板提供可裝入其他元件的元件封裝，以便進行自訂配置測試，並提供跨接器和測試點，以簡化裝置配置和性能驗證。
TPS7H4011EVM-CVAL — TPS7H4011-SP 評估模組
TPS7H4011EVM-CVAL 展示單一 TPS7H4011-SP 降壓轉換器的運作。電路板提供可裝入其他元件的元件封裝，以便進行自訂配置測試，並提供跨接器和測試點，以簡化裝置配置和性能驗證。
TPS7H4011QEVM-CVAL — TPS7H4011-SP 評估模組
TPS7H4011-CALC — TPS7H4011 component calculator
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| CFP (HLB) | 30 | Ultra Librarian |
| HTSSOP (DDW) | 44 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。