NEW

AMC3301-Q1

ACTIVE

Automotive ±250-mV input, precision reinforced isolated amplifier with integrated DC/DC converter

Top

Product details

Parameters

Input range (Vp-p) ±0.25 Isolation working voltage VIOWM (rms) (V) 1200 Isolation transient overvoltage VIOTM (peak) (V) 6000 CMTI (Min) (kV/µs) 85 Input offset (+/-) (Max) (mV) 0.15 Input offset drift (+/-) (Typ) (uV/C) 0.15 Gain error (+/-) (Max) (%) 0.2 Gain error drift (+/-) (Typ) (ppm/°C) 6 Gain non-linearity (+/-) (Max) (%) 0.04 Small signal bandwidth (Typ) (kHz) 334 Rating Automotive Operating temperature range (C) -40 to 125 open-in-new Find other Isolated amplifiers

Package | Pins | Size

SO-MOD (DWE) 16 106 mm² 10.3 x 10.3 open-in-new Find other Isolated amplifiers

Features

  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C, TA
  • 3.3-V or 5-V single supply with integrated DC/DC converter
  • ±250-mV linear input voltage range optimized for current measurement using shunt resistors
  • Fixed gain: 8.2
  • Low DC errors:
    • Input offset voltage: ±0.15 mV (max)
    • Input offset drift: ±1 µV/°C (max)
    • Gain error: ±0.2% (max)
    • Gain error drift: ±40 ppm/°C (max)
    • Nonlinearity: ±0.04% (max)
  • High CMTI: 85 kV/µs (min)
  • System-level diagnostic features
  • Safety-related certifications:
    • 6000-VPK reinforced isolation per DIN VDE V 0884-11
    • 4250-VRMS isolation for 1 minute per UL1577
  • Meets CISPR-11 and CISPR-25 EMI standards

All trademarks are the property of their respective owners.

open-in-new Find other Isolated amplifiers

Description

The AMC3301-Q1 is a precision, isolated amplifier with a fully integrated, isolated DC/DC converter that allows single-supply operation from the low-side of the device. The reinforced capacitive isolation barrier is certified according to VDE V 0884-11 and UL1577 and separates sections of the system that operate on different common-mode voltage levels and protects low-voltage domains from damage.

The input of the AMC3301-Q1 is optimized for direct connection to shunt resistors or other low voltage-level signal sources. The integrated isolated DC/DC converter allows flexible placement of the shunt and the AMC3301-Q1, and makes the device a unique solution for space-constrained applications.

The excellent performance of the device supports accurate current monitoring and control, which is an important feature to achieve low torque ripple in motor control applications. The integrated DC/DC converter fault-detection and diagnostic output pin of the AMC3301-Q1 simplify system-level design and diagnostics.

The AMC3301-Q1 is specified over the industrial temperature range of –40°C to +125°C.

open-in-new Find other Isolated amplifiers
Download

Technical documentation

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
49
Description

The AMC3301 evaluation module (EVM) is a platform for evaluating the AMC3301 device, a precision isolated amplifier with an integrated DC/DC converter, which powers the high side of the amplifier. AMC3301 is a 7-kV reinforced isolated amplifier designed for use in current shunt measuring (...)

Features
  • Integrated DC/DC converter for high-side power
  • Reinforced isolated amplifier: 7-kV peak, 10-kV surge
  • Fixed gain of 8.2
  • ±250-mV input range

Design tools & simulation

SIMULATION MODEL Download
SBAM440.TSC (82 KB) - TINA-TI Reference Design
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
CALCULATION TOOL Download
SBAR013A.ZIP (290 KB)

CAD/CAE symbols

Package Pins Download
SOIC (DWE) 16 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos