NEW

AMC3330-Q1

ACTIVE

Automotive ±1-V input, precision reinforced isolated amplifier with integrated DC/DC converter

Top

Product details

Parameters

Input range (Vp-p) ±1 Isolation working voltage VIOWM (rms) (V) 1200 Isolation transient overvoltage VIOTM (peak) (V) 6000 CMTI (Min) (kV/µs) 75 Input offset (+/-) (Max) (mV) 0.2 Input offset drift (+/-) (Typ) (uV/C) 5 Gain error (+/-) (Max) (%) 0.4 Gain error drift (+/-) (Typ) (ppm/°C) 60 Gain non-linearity (+/-) (Max) (%) 0.075 Small signal bandwidth (Typ) (kHz) 310 Rating Automotive Operating temperature range (C) -40 to 125 open-in-new Find other Isolated amplifiers

Package | Pins | Size

SO-MOD (DWE) 16 106 mm² 10.3 x 10.3 open-in-new Find other Isolated amplifiers

Features

  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C, TA
  • 3.3-V or 5-V single supply operation with integrated DC/DC converter
  • ±1-V input voltage range optimized for voltage measurements with high input impedance
  • Fixed gain: 2.0
  • Low DC errors:
    • Gain error: ±0.2% (max)
    • Gain drift: ±45 ppm/°C (max)
    • Offset error: ±0.3 mV (max)
    • Offset drift: ±4 µV/°C (max)
    • Nonlinearity: ±0.02% (max)
  • High CMTI: 85 kV/µs (min)
  • System-level diagnostic features
  • Safety-related certifications:
    • 6000-VPK reinforced isolation per DIN VDE V 0884-11 (VDE V 0884-11): 2017-01
    • 4250-VRMS isolation for 1 minute per UL1577
  • Meets CISPR-11 and CISPR-25 EMI standards

All trademarks are the property of their respective owners.

open-in-new Find other Isolated amplifiers

Description

The AMC3330-Q1 is a precision, isolated amplifier with a fully integrated, isolated DC/DC converter that allows single-supply operation from the low-side of the device. The reinforced capacitive isolation barrier is certified according to VDE V 0884-11 and UL1577 and separates sections of the system that operate on different common-mode voltage levels and protects low-voltage domains from damage.

The input of the AMC3330-Q1 is optimized for direct connection to high-impedance, voltage-signal sources such as a resistor-divider network to sense high-voltage signals. The integrated isolated DC/DC converter allows measurement of non-ground-referenced signals and makes the device a unique solution for noisy, space-constrained applications.

The excellent performance of the device supports accurate voltage monitoring and control. The integrated DC/DC converter fault-detection and diagnostic output pin of the AMC3330-Q1 simplify system-level design and diagnostics.

The AMC3330-Q1 is specified over the temperature range of –40°C to +125°C.

open-in-new Find other Isolated amplifiers
Download

Technical documentation

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
49
Description

The AMC3330 evaluation module (EVM) is an evaluation platform for the AMC3330 product, a precision isolated amplifier with an integrated DC/DC converter that powers the high side of the amplifier. AMC3330 is a 7-kV reinforced isolated amplifier designed for use in bipolar voltage-measuring (...)

Features
  • Integrated DC/DC converter for high-side power
  • Reinforced isolated amplifier: 7-kV peak, 10-kV surge
  • Fixed gain of 2
  • ±1-V input range

Design tools & simulation

SIMULATION MODEL Download
SBAM446.TSC (78 KB) - TINA-TI Spice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
CALCULATION TOOL Download
SBAR013A.ZIP (290 KB)

CAD/CAE symbols

Package Pins Download
SOIC (DWE) 16 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos