Product details

Local sensor accuracy (max) 0.2, 0.9 Type Local Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 1.7 Interface type 1-wire Supply voltage (max) (V) 5.5 Features 2-kb EEPROM, 64-bit unique ID, NIST traceable, SHA-2 authentication Temp resolution (max) (Bits) 16 Remote channels (#) 0 Addresses 256 Rating Catalog TI functional safety category Functional Safety-Capable
Local sensor accuracy (max) 0.2, 0.9 Type Local Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 1.7 Interface type 1-wire Supply voltage (max) (V) 5.5 Features 2-kb EEPROM, 64-bit unique ID, NIST traceable, SHA-2 authentication Temp resolution (max) (Bits) 16 Remote channels (#) 0 Addresses 256 Rating Catalog TI functional safety category Functional Safety-Capable
WSON (NGR) 8 6.25 mm² 2.5 x 2.5
  • 1-Wire interface with multi-drop shared bus and cyclic redundancy check (CRC)
  • Bus powered with operating voltage: 1.7 V to 5.5 V
  • IEC 61000-4-2 ESD for 8-kV contact discharge
  • Functional Safety-Capable
  • High-accuracy digital temperature sensor
    • TMP1827
      • ±0.2°C (maximum) from +10°C to +45°C
      • ±0.3°C (maximum) from –40°C to +105°C
      • ±0.4°C (maximum) from –55°C to +150°C
    • TMP1827N
      • ±0.9°C (maximum) from –55°C to +150°C
  • Temperature measurement current: 94 µA
  • Shutdown current: 1.3 µA
  • 16-bit temperature resolution: 7.8125 m°C (1 LSB)
  • Fast data rates of 90 kbps in overdrive speed
  • Flexible user programmable short address modes for faster device address
  • SHA-256-HMAC authentication scheme
    • FIPS 180-4 compliant Secure Hash Implementation
    • FIPS 198-1 compliant HMAC Implementation
  • 2Kb EEPROM features:
    • Write operation in 64-bit block size
    • Continuous read mode
    • Read with write protection with 256-bit page size
    • Authenticated write protection mode with 256-bit page size
    • Programming current: 178 µA
  • NIST traceable factory-programmed non erasable 64-bit identification number for device addressing
  • Four configurable open-drain digital input-output and temperature alert
  • 1-Wire interface with multi-drop shared bus and cyclic redundancy check (CRC)
  • Bus powered with operating voltage: 1.7 V to 5.5 V
  • IEC 61000-4-2 ESD for 8-kV contact discharge
  • Functional Safety-Capable
  • High-accuracy digital temperature sensor
    • TMP1827
      • ±0.2°C (maximum) from +10°C to +45°C
      • ±0.3°C (maximum) from –40°C to +105°C
      • ±0.4°C (maximum) from –55°C to +150°C
    • TMP1827N
      • ±0.9°C (maximum) from –55°C to +150°C
  • Temperature measurement current: 94 µA
  • Shutdown current: 1.3 µA
  • 16-bit temperature resolution: 7.8125 m°C (1 LSB)
  • Fast data rates of 90 kbps in overdrive speed
  • Flexible user programmable short address modes for faster device address
  • SHA-256-HMAC authentication scheme
    • FIPS 180-4 compliant Secure Hash Implementation
    • FIPS 198-1 compliant HMAC Implementation
  • 2Kb EEPROM features:
    • Write operation in 64-bit block size
    • Continuous read mode
    • Read with write protection with 256-bit page size
    • Authenticated write protection mode with 256-bit page size
    • Programming current: 178 µA
  • NIST traceable factory-programmed non erasable 64-bit identification number for device addressing
  • Four configurable open-drain digital input-output and temperature alert

The TMP1827 is a high-accuracy, 1-Wire compatible digital output temperature sensor with integrated 2Kb EEPROM , SHA-256-HMAC authentication scheme and a wide operating temperature range from –55°C to +150°C. The TMP1827 provides a high accuracy of ±0.1°C (typical)/±0.2°C (maximum) across the temperature range of +10°C to +45°C. Each device comes with a factory programmed 64-bit unique identification number for addressing and NIST traceability. The TMP1827 supports both standard speed for legacy application and overdrive mode with 90-kbps data rate for low latency communication across a wide voltage range of 1.7 V to 5.5 V.

In the simplest mode of operation, the TMP1827 1-Wire interface, with an integrated 8-kV IEC-61000-4-2 ESD protection on the data pin, requires only a single connection and a ground return in bus powered mode, which simplifies and reduces cost by reducing the number of wires and external protection components. Additionally, there is the V DD power pin also available for applications that may want to have a dedicated power supply.

The TMP1827 is a high-accuracy, 1-Wire compatible digital output temperature sensor with integrated 2Kb EEPROM , SHA-256-HMAC authentication scheme and a wide operating temperature range from –55°C to +150°C. The TMP1827 provides a high accuracy of ±0.1°C (typical)/±0.2°C (maximum) across the temperature range of +10°C to +45°C. Each device comes with a factory programmed 64-bit unique identification number for addressing and NIST traceability. The TMP1827 supports both standard speed for legacy application and overdrive mode with 90-kbps data rate for low latency communication across a wide voltage range of 1.7 V to 5.5 V.

In the simplest mode of operation, the TMP1827 1-Wire interface, with an integrated 8-kV IEC-61000-4-2 ESD protection on the data pin, requires only a single connection and a ground return in bus powered mode, which simplifies and reduces cost by reducing the number of wires and external protection components. Additionally, there is the V DD power pin also available for applications that may want to have a dedicated power supply.

Download View video with transcript Video
Information

Request more information

NIST calibration documentation is available. Request now

The TMP1827 security programming guide, secure tool and software are available. Request now

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
TMP1826 ACTIVE 1-Wire® ±0.2°C accurate digital temperature sensor with 2-kbit EEPROM Pin-to-pin, same accuracy temperature sensor, with EEPROM only

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 8
Type Title Date
* Data sheet TMP1827 1-Wire®, ±0.2°C Accurate Temperature Sensor With SHA-256-HMAC Authentication Engine, 2Kb EEPROM datasheet (Rev. A) PDF | HTML 30 May 2023
Functional safety information TMP1827 Functional Safety FIT Rate, FMD and Pin FMA (Rev. A) PDF | HTML 30 May 2023
Application brief Key Generation and Authentication Mechanism for TMP1827 PDF | HTML 25 Jan 2023
Application brief Replace External Memory for Module Identification With TMP1826 Embedded EEPROM PDF | HTML 25 Jan 2023
Certificate TMP1827EVM EU RoHs Declaration of Conformity (DoC) 21 Dec 2022
Application note Implementing Host Controller for TMP1826 & TMP1827 Single-Wire Temp. Sensor PDF | HTML 03 Nov 2022
EVM User's guide TMP1827EVM User's Guide PDF | HTML 07 Sep 2022
Application note Implementing 1-Wire Enumeration for TMP1826 With TM4C129x Microcontrollers (Rev. D) PDF | HTML 13 Jul 2020

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TMP1827EVM — TMP1827 evaluation module for single-wire digital temperature sensor

The TMP1827 is a high-accuracy single-wire compatible digital-output temperature sensor with integrated secure hash algorithm (SHA) 256-bit with hash message authentication code (HMAC) and 2-Kbit EEPROM. The TMP1827 provides a high-accuracy of ±0.3°C across the temperature range of -55°C to 150°C.

(...)

User guide: PDF | HTML
Not available on TI.com
Application software & framework

TMP1826-1-WIRE-CODE TMP1826 code and drivers for C2000™ MCU TMS320F28003x, MSPM0L1306 and Tiva™ ARM® MCUs C series

lock = Requires export approval (1 minute)
Supported products & hardware

Supported products & hardware

Products
Digital temperature sensors
TMP1826 1-Wire® ±0.2°C accurate digital temperature sensor with 2-kbit EEPROM TMP1827 1-Wire®, ±0.2°C accurate digital temperature sensor with authentication,  2-K
Package Pins Download
WSON (NGR) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos