Product details


Resistance (25°C) (Ω) 100000 Resistance tolerance (%) 1 Operating temperature range (C) -40 to 125, -40 to 150 Vin (Min) (V) 0 Vin (Max) (V) 5.5 Supply current (Max) (uA) 400 Sensor gain (mV/Deg C) 6400 ppm/°C Rating Catalog Interface type Resistance open-in-new Find other Thermistors

Package | Pins | Size

SOT-5X3 (DYA) 2 1 mm² 0.8 x 1.2 X1SON (DEC) 2 1 mm² 1 x 0.6 open-in-new Find other Thermistors


  • Silicon-based thermistor with a positive temperature coefficient (PTC)
  • Linear resistance change across temperature
  • 100-kΩ nominal resistance at 25 °C (R25)
    • ±1% maximum (0 °C to 70 °C)
  • Wide operating temperature of –40 °C to +150 °C
  • Consistent sensitivity across temperature
    • 6400 ppm/°C TCR (25 °C)
    • 0.2% typical TCR tolerance across temperature range
  • Fast thermal response time of 0.6 s (DEC)
  • Long lifetime and robust performance
    • Built-in fail-safe in case of short-circuit failures
    • 0.3% typical long term sensor drift
open-in-new Find other Thermistors


Get started today with the Thermistor Design Tool, offering complete resistance vs temperature table (R-T table) computation, other helpful methods to derive temperature and example C-code.

Linear thermistors offer linearity and consistent sensitivity across temperature to enable simple and accurate methods for temperature conversion. Low power consumption and a small thermal mass minimize the impact of self-heating. With built-in failsafe behavior at high temperatures and powerful immunity to environmental variation, these devices are designed for a long lifetime of high performance. The small size of the TMP6 series also allows for close placement to heat sources and quick response times.

Take advantage of benefits over NTC thermistors such as no extra linearization circuitry, minimized calibration, less resistance tolerance variation, larger sensitivity at high temperatures, and simplified conversion methods to save time and memory in the processor.

The TMP63 is currently available in a 0402 footprint-compatible X1SON package and a 0603 footprint-compatible SOT-5X3 package.

open-in-new Find other Thermistors

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 12
Type Title Date
* Data sheet TMP63 ±1% 100-kΩ Linear Thermistor With 0402 and 0603 Package Options datasheet (Rev. D) Nov. 02, 2020
Application note How to Protect Displays with the Latest Temperature Sensing Technology Jul. 26, 2021
Technical article How accurate sensing in HVAC systems improves efficiency and saves consumers money Jan. 26, 2021
Application note Wide temperature range linear negative temperature coefficient (NTC) output Dec. 22, 2020
Application note Wide temperature range linear positive temperature coefficient (PTC) output Dec. 18, 2020
Application note TMP6X Oversampling Oct. 14, 2020
Technical article Designing with linear thermistors Feb. 26, 2020
Technical article How to choose the right thermistor for your temperature sensing application Feb. 13, 2020
White paper Temperature Sensing with Thermistors Jan. 28, 2020
Technical article How to enable thermal safety for automotive infotainment and cluster systems Oct. 15, 2019
Application note Measurement error caused by self-heating in NTC and PTC thermistors Jun. 14, 2019
User guide TMP6EVM User's Guide Oct. 16, 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

document-generic User guide
The TMP6EVM evaluation kit is a plug and play system to test and evaluate the linear silicon TMP6 thermistor. The EVM can be powered with either with USB or a CR2032 coin cell battery. The EVM is a standalone module that supports the TMP116 digital sensor and two analog channels. The TMP116 can be (...)
  • Streaming temperature measurements
  • Highly accurate TMP116 digital temperature sensor for local temperature reference
  • Up to two analog channels
  • Detachable sensor section for prototyping remote operation
  • USB or battery power option

Design tools & simulation

TMP6 thermistor design tool with look-up tables, performance comparisons & code examples
TMP6-THERMISTOR-DESIGN — TMP6 linear thermistors, like other traditional negative temperature coefficient (NTC) or positive temperature coefficient (PTC) thermistors on the market, require resistance-to-temperature conversion tables to use them within a system. The TMP6 thermistor design tool offers these tables in addition (...)
  • Customizable based on part number, bias voltage/current, ADC resolution and bias resistor
  • Device resistance tables
  • Thermistor comparison based on resistance tables
  • Code examples for LUTs, polynomial regression and Steinhart-Hart equations
  • Code examples for threshold detection and software averaging

CAD/CAE symbols

Package Pins Download
SOT-5X3 (DYA) 2 View options
X1SON (DEC) 2 View options

Ordering & quality

Information included:
  • RoHS
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​