Top

Product details

Parameters

Function Type-C Type PD controller Power role DRP, Sink, Source Alternate mode Yes External power path control GPIO, I2C Data role DFP, DRD, UFP Internal power path 20V 5A Sink, 20V 5A Source, 5V 600mA VCONN USB speed (Mbps) Rating Catalog Dead battery support Yes Operating temperature range (C) -10 to 75 Iq (Typ) (uA) 45 open-in-new Find other USB Type-C & USB Power Delivery ICs

Package | Pins | Size

VQFN (RSH) 56 49 mm² 7 x 7 open-in-new Find other USB Type-C & USB Power Delivery ICs

Features

  • USB Power Delivery (PD) Controller
    • USB PD 3.0 Compliant
    • Fast Role Swap Support
    • Physical Layer and Policy Engine
    • Configurable at Boot and Host-Controlled
  • USB Type-C Specification Compliant
    • Cable Attach and Orientation Detection
    • Default, 1.5 A, or 3 A Power Advertisement
    • Up to 600-mA VConn Current
  • Port Power Switch
    • Two 5 V to 20 V, 5-A Bidirectional Switches to or from VBUS
    • Up to 10-A Adjustable Current Limiting
    • Ideal Diode Reverse Current Protection
    • Undervoltage, and Overvoltage Protection
    • Slew Rate Control
    • 5-V, 600-mA VConn Source
  • BC1.2 Support
    • Advertisement as DCP and CDP
    • Automatic DCP Modes Selection:
      • Shorted Mode per BC1.2 and YD/T 1591-2009
      • 2.7-V Divider 3 Mode
      • 1.2-V Mode
    • Data Contact Detect
    • Primary and Secondary Detection
  • I2C Master Write Control for Alt Mode Muxes and Variable DCDCs
  • Alternate Mode Support
    • DisplayPort
    • Thunderbolt™
  • Power Management
    • Power Supply from 3.3 V or VBUS Source
    • 3.3-V LDO Output for Dead Battery Support
  • 7-mm × 7-mm QFN Package
    • 0.4-mm Pitch
    • 56 Pin

All trademarks are the property of their respective owners.

open-in-new Find other USB Type-C & USB Power Delivery ICs

Description

The TPS65987D is a stand-alone USB Type-C and Power Delivery (PD) controller providing cable plug and orientation detection for a single USB Type-C connector. Upon cable detection, the TPS65987D communicates on the CC wire using the USB PD protocol. When cable detection and USB PD negotiation are complete, the TPS65987D enables the appropriate power path and configures alternate mode settings for external multiplexers.

open-in-new Find other USB Type-C & USB Power Delivery ICs
Download
Similar products you might be interested in
open-in-new Compare products
Similar but not functionally equivalent to the compared device:
NEW TPS25750 PREVIEW Highly integrated USB Type-C® and USB PD controller with pre-configured GUI TPS25750 is optimized for power-only USB Type-C PD applications

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 24
Type Title Date
* Datasheet TPS65987D USB Type-C and USB PD Controller with Integrated Power Switches datasheet (Rev. B) Oct. 23, 2018
Technical articles Ease power-supply design for USB PD applications with buck-boost converters Jul. 09, 2020
Application notes USB Type C Power Delivery Source with TPS65987 and TPS55288 Mar. 06, 2020
Application notes TPS65988 BC1.2 Implementation Guideline (Rev. A) Jan. 16, 2020
Application notes USB Power Delivery - Compliance Tests (Rev. A) Sep. 25, 2019
Application notes TPS65987/88 Hardware Design Guidelines (Rev. B) Aug. 23, 2019
White papers USB Type-C and USB power delivery power path design considerations (Rev. A) Jun. 12, 2019
Application notes TPS65987/8 Power and Data Role Swaps Jun. 10, 2019
Application notes TPS6598x Dead Battery Application Note Dec. 20, 2018
Application notes TPS65987 and TPS65988 SPI Flash Firmware Update Over I2C (Rev. A) Oct. 17, 2018
Technical articles USB Type-C™ and USB Power Delivery – no assembly required Oct. 04, 2018
Application notes TPS65987D and TPS65988 User Alternate Modes (Rev. A) Sep. 14, 2018
User guides TPS65987DDH and TPS65988DH Host Interface Technical Reference Manual (Rev. B) Sep. 14, 2018
Application notes TPS6598x Thunderbolt Alternate Mode (Rev. A) Sep. 04, 2018
User guides USB-C-PD-DUO-EVM User's Guide Aug. 27, 2018
White papers Fast role swap power architecture white paper Aug. 20, 2018
User guides TPS6598x Application Customization Tool (Rev. B) Jul. 31, 2018
Application notes TPS6598x DisplayPort Alternate Mode (Rev. B) Jul. 31, 2018
Application notes TPS65988 and TPS65987D PD3.0 Fast Role Swap Jul. 30, 2018
Application notes TPS65987/88 I2C Master Programming Jul. 25, 2018
User guides Power DUO Sink 200 W USB-C PD Reference Design Jul. 12, 2018
User guides Power DUO Source 200 W USB-C PD Reference Design Jul. 12, 2018
Application notes TPS65987/88 GPIO Events Jul. 11, 2018
Application notes TPS65987D, TPS65988 Power Path Performance and Protection May 30, 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
199
Description
What you need to get started

Step 1: Order the TPS65987EVM and read the user's guide
Step 2: Watch the EVM tutorial
Step 3: Watch the TPS6598X GUI tool videos
Step 4: Download the TPS6598X GUI

The TPS65987EVM design is targeted for USB Type-C and Power Delivery (PD) Applications. This EVM features (...)
Features
  • USB Power delivery (PD) testing and verification
  • USB Type-C testing and verification
  • TPS65987D has two internal power paths with OVP, OCP and RCP
  • TPD6S300A provide short-to-VBUS protection for CC1/2 and SBU1/2 lines
  • Display port alternate mode and USB data verification (when used with 10G-EXPANSION-EVM (...)
EVALUATION BOARDS Download
document-generic User guide
149
Description
What you need to get started:

Step 1: Order the USB-C-PD-DUO-EVM and read the user's guide
Step 2: Watch the EVM tutorial
Step 3: Watch the TPS6598X GUI tool videos
Step 4: Download the TPS6598X GUI


The USB-C-PD-DUO-EVM is a complete USB PD Source and Sink reference design that allows users to (...)
Features
  • Up to 200W Source or Sink
  • PD3.0 Compliant
  • Built in SPI/I2C Debugger and Programmer
  • Fully Configurable for any USB Type-C and Power Delivery Application

Software development

IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
TPS6598x configuration tool
TPS6598X-CONFIG What you need to get started:

Step 1: Watch the TPS6598X GUI tool videos
Step 2: Download the TPS6598X GUI
Step 3: Order the USB-C-PD-DUO-EVM and read the user's guide
Step 4: Watch the EVM Tutorial


The TPS6598x configuration tool assists in the design phase by providing a GUI interface to configure (...)

Features
  • Update a preexisting firmware image or start with a default configuration
  • Migrate the configuration of a previous firmware revision to the latest firmware release
  • Configure a variety of settings
    • Data port roles
    • Power port role
    • Power profiles
    • Alternate modes such as DisplayPort
    • GPIO mappings
  • Save in a (...)

Design tools & simulation

SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOLS Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
GERBER FILES Download
SLVC770.ZIP (3868 KB)

Reference designs

REFERENCE DESIGNS Download
Power DUO Sink 200W USB-C PD Reference Design
TIDA-050014 — The Power DUO Sink 200W USB-C PD Reference Design is a complete USB PD Sink reference design that allows users to select their USB PD sink voltage.
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Power DUO Source 200W USB-C PD Reference Design
TIDA-050012 — The Power DUO Source 200 W USB-C PD Reference Design is a complete USB PD Source reference design that allows users to select their USB PD source voltage.
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
22-W/in3, 93.1% peak efficiency, 100-W USB-PD 3.0 AC/DC adapter reference design with Si MOSFET
TIDA-010047 — This fully-tested reference design is a high-efficiency, high-power-density, AC/DC adapter solution with a wide input voltage range (100- to 240-V AC) for laptop adapters and smartphone charger applications. This design consists of a front-end transition-mode (TM) power factor correction (PFC (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
VQFN (RSH) 56 View options

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos