Startseite Schnittstelle Ethernet-ICs Ethernet-PHYs
Startseite
Schnittstelle
Ethernet-ICs
Ethernet-PHYs
NEU

DP83TD530-Q1

VORSCHAU

10BASE-T1S OA PMD-Transceiver

Jetzt bestellen
Datenblatt

DP83TD530-Q1

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

Datarate (Mbps) 10BASE-T1S Interface type OA 3-pin Rating Automotive Number of ports Single Features IEEE 802.3cg, OA TC14 specification-compliant, Single supply, Wettable flank package I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 125
Datarate (Mbps) 10BASE-T1S Interface type OA 3-pin Rating Automotive Number of ports Single Features IEEE 802.3cg, OA TC14 specification-compliant, Single supply, Wettable flank package I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 125
VSON (DRB) 8 9 mm² 3 x 3
  • IEEE 802.3cg compliant 10Mbps 10BASE-T1S
    • Multidrop or point-to-point half-duplex
    • Supports >25m cable and >16 nodes depending on channel
  • Host controller interface: OA compliant 3-pin interface
  • AEC-Q100 qualified for automotive applications:
    • Temperature: –40 to 125°C, TA (grade 1)
  • Single supply operation from 3.3V with 1.8/2.5/3.3V options for I/O voltage
  • OA TC10 local and remote wake-up support
  • Support OA TC14 PHY features when paired with appropriate external host
    • Topology discovery
    • Signal Quality Indicator (SQI)
    • Harness Defect Detection (HDD)
  • Robust PHY architecture with protection and fault detection features
    • Bus wires short to GND or 48V VBAT protection
    • Overtemperature, undervoltage detection
    • ±8kV HBM ESD for MDI pins
    • ±8kV ISO10605 /IEC61000-4-2 ESD contact discharge on MDI pins
    • Extended CMV support for MDI pins
    • OA PMA, and EMC compliant
  • IEEE 802.3cg compliant 10Mbps 10BASE-T1S
    • Multidrop or point-to-point half-duplex
    • Supports >25m cable and >16 nodes depending on channel
  • Host controller interface: OA compliant 3-pin interface
  • AEC-Q100 qualified for automotive applications:
    • Temperature: –40 to 125°C, TA (grade 1)
  • Single supply operation from 3.3V with 1.8/2.5/3.3V options for I/O voltage
  • OA TC10 local and remote wake-up support
  • Support OA TC14 PHY features when paired with appropriate external host
    • Topology discovery
    • Signal Quality Indicator (SQI)
    • Harness Defect Detection (HDD)
  • Robust PHY architecture with protection and fault detection features
    • Bus wires short to GND or 48V VBAT protection
    • Overtemperature, undervoltage detection
    • ±8kV HBM ESD for MDI pins
    • ±8kV ISO10605 /IEC61000-4-2 ESD contact discharge on MDI pins
    • Extended CMV support for MDI pins
    • OA PMA, and EMC compliant

The DP83TD530-Q1 is 10BASE-T1S OA TC-14 compliant PMD transceiver. This device provides full analog front end functionality while relying on the host system for MAC, digital PHY, and management functions. This solution, similar to the CAN transceiver approach, features a simple and cost effective 3-pin clock-less interface between the host controller and the PMD transceiver chip. The device supports 10Mbps multi-drop or point-to-point half-duplex communication over unshielded twisted pair cables with extended common mode voltage (CMV) tolerance. The device communicates to a host controller or switch using OA-3pin interface. The host must have the 10BASE-T1S digital PHY incorporated.

The DP83TD530-Q1 incorporates TC10 wake/sleep features to enable efficient system-level power consumption. The device supports remote wake-up over the Ethernet data line.

The DP83TD530-Q1 is equipped with diagnostic features such as cable fault detection, undervoltage and overtemperature monitoring to streamline system development and maintenance.

The DP83TD530-Q1 is 10BASE-T1S OA TC-14 compliant PMD transceiver. This device provides full analog front end functionality while relying on the host system for MAC, digital PHY, and management functions. This solution, similar to the CAN transceiver approach, features a simple and cost effective 3-pin clock-less interface between the host controller and the PMD transceiver chip. The device supports 10Mbps multi-drop or point-to-point half-duplex communication over unshielded twisted pair cables with extended common mode voltage (CMV) tolerance. The device communicates to a host controller or switch using OA-3pin interface. The host must have the 10BASE-T1S digital PHY incorporated.

The DP83TD530-Q1 incorporates TC10 wake/sleep features to enable efficient system-level power consumption. The device supports remote wake-up over the Ethernet data line.

The DP83TD530-Q1 is equipped with diagnostic features such as cable fault detection, undervoltage and overtemperature monitoring to streamline system development and maintenance.
filter Andere Ethernet-PHYs suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet DP83TD530-Q1 Automotive 10BASE-T1S Multidrop OA PMD Transceiver with TC10 datasheet PDF | HTML 03 Dez 2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DP83TD530EVM — DP83TD530EVM evaluation module

This User’s Guide discusses how to properly operate and configure the DP83TD530EVM. For best layout practices, schematic files, and Bill of Materials, see the associated support documents.

Benutzerhandbuch: PDF | HTML
Anfordern
Anwendungssoftware und Frameworks

DP83TD535-Q1-DESIGN — 10BASE-T1S Automotive PHY with OA 3-pin interface

10BASE-T1S Automotive PHY with 3-pin interface
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Ethernet-PHYs
Anfordern
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese Design- und Simulationssuite mit vollem Funktionsumfang verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
View Options
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VSON (DRB) 8 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos