NEU

DP83TD555J-Q1

Name: DP83TD555J-Q1
Brand: TI
SKU: DP83TD555J-Q1
Price: 3.3 USD

VORSCHAU

10BASE-T1S SPI-PHY mit integriertem MAC

Jetzt bestellen

Datenblatt

document-pdfAcrobat DP83TD555J-Q1 Automotive 10BASE-T1S Multidrop OA SPI MAC-PHY Ethernet Transceiver datasheet (Englisch) PDF | HTML

DP83TD555J-Q1

VORSCHAU

Datenblatt

Jetzt bestellen

Produktdetails

Datarate (Mbps)

10BASE-T1S

Interface type

SPI

Rating

Automotive

Number of ports

Single

Features

IEEE 1588v2/802.1AS time synchronization, IEEE 802.3cg, Single supply, TC10, Wettable flank package

I/O supply voltage (typ) (V)

1.8, 2.5, 3.3

Operating temperature range (°C)

-40 to 125

Datarate (Mbps)

10BASE-T1S

Interface type

SPI

Rating

Automotive

Number of ports

Single

Features

IEEE 1588v2/802.1AS time synchronization, IEEE 802.3cg, Single supply, TC10, Wettable flank package

I/O supply voltage (typ) (V)

1.8, 2.5, 3.3

Operating temperature range (°C)

-40 to 125

— (—)

—

See data sheet

IEEE 802.3cg compliant 10Mbps 10BASE-T1S
- Multidrop or point-to-point half-duplex
- Supports >25m cable and >16 nodes depending on channel
Host controller interface: OA TC10, TC14 compliant SPI up to 25MHz
Integtrated IEEE 802.3 half-duplex MAC with Ethertype, VLAN, and DMAC ingress filtering
AEC-Q100 qualified for automotive applications:
- Temperature: –40 to 125°C, TA (grade 1)
Physical Layer Collision Avoidance (PLCA) with burst mode support
TSN with IEEE 802.1AS
Remote PHY GPIO control
Single supply operation from 3.3V with 1.8/2.5/3.3V options for I/O voltage
OA TC10 local and remote wake-up support
- Low power wake pins: VBAT, WAKE and INH
- OA compliant ultra-low sleep current
- 12/24/48V direct VBAT support
OA TC14 PHY features:
- Topology discovery
- Signal Quality Indicator (SQI)
- Harness Defect Detection (HDD)
Robust PHY architecture with protection and fault detection features
- Bus wires short to GND or 48V VBAT protection
- Overtemperature, undervoltage detection
- ±8kV HBM ESD for MDI pins
- ±8kV ISO10605 /IEC61000-4-2 ESD contact discharge on MDI pins
- Extended CMV support for MDI pins
- OA PMA, PCS, PLCA, and EMC compliant

IEEE 802.3cg compliant 10Mbps 10BASE-T1S
- Multidrop or point-to-point half-duplex
- Supports >25m cable and >16 nodes depending on channel
Host controller interface: OA TC10, TC14 compliant SPI up to 25MHz
Integtrated IEEE 802.3 half-duplex MAC with Ethertype, VLAN, and DMAC ingress filtering
AEC-Q100 qualified for automotive applications:
- Temperature: –40 to 125°C, TA (grade 1)
Physical Layer Collision Avoidance (PLCA) with burst mode support
TSN with IEEE 802.1AS
Remote PHY GPIO control
Single supply operation from 3.3V with 1.8/2.5/3.3V options for I/O voltage
OA TC10 local and remote wake-up support
- Low power wake pins: VBAT, WAKE and INH
- OA compliant ultra-low sleep current
- 12/24/48V direct VBAT support
OA TC14 PHY features:
- Topology discovery
- Signal Quality Indicator (SQI)
- Harness Defect Detection (HDD)
Robust PHY architecture with protection and fault detection features
- Bus wires short to GND or 48V VBAT protection
- Overtemperature, undervoltage detection
- ±8kV HBM ESD for MDI pins
- ±8kV ISO10605 /IEC61000-4-2 ESD contact discharge on MDI pins
- Extended CMV support for MDI pins
- OA PMA, PCS, PLCA, and EMC compliant

The DP83TD555J-Q1 is an IEEE802.3cg 10BASE-T1S and Open Alliance (OA) TC10, TC14 compliant Serial Peripheral Interface (SPI) MAC-PHY Ethernet transceiver. The device supports 10Mbps multi-drop or point-to-point half-duplex communication over unshielded twisted pair cables with extended common mode voltage tolerance. The device communicates to a host controller or switch using OA SPI.

The DP83TD555J-Q1 integrates IEEE802.3 Media Access Controller (MAC) that enables microcontrollers with SPI to seamlessly connect to Ethernet networks using the 10BASE-T1S bus.

The DP83TD555J-Q1 incorporates TC10 wake/sleep features to enable efficient system-level power consumption. The device supports remote wake-up over the Ethernet data line. When a wake-up event is detected, the DP83TD555J-Q1 initiates system start-up by driving INH high. The device also integrates IEEE 1588v2 /802.1AS to enable accurate time synchronization and hardware timestamping for time-critical automotive and industrial applications.

The DP83TD555J-Q1 is equipped with diagnostic features such as cable fault detection, undervoltage and overtemperature monitoring to streamline system development and maintenance.

The DP83TD555J-Q1 is an IEEE802.3cg 10BASE-T1S and Open Alliance (OA) TC10, TC14 compliant Serial Peripheral Interface (SPI) MAC-PHY Ethernet transceiver. The device supports 10Mbps multi-drop or point-to-point half-duplex communication over unshielded twisted pair cables with extended common mode voltage tolerance. The device communicates to a host controller or switch using OA SPI.

The DP83TD555J-Q1 integrates IEEE802.3 Media Access Controller (MAC) that enables microcontrollers with SPI to seamlessly connect to Ethernet networks using the 10BASE-T1S bus.

The DP83TD555J-Q1 incorporates TC10 wake/sleep features to enable efficient system-level power consumption. The device supports remote wake-up over the Ethernet data line. When a wake-up event is detected, the DP83TD555J-Q1 initiates system start-up by driving INH high. The device also integrates IEEE 1588v2 /802.1AS to enable accurate time synchronization and hardware timestamping for time-critical automotive and industrial applications.

The DP83TD555J-Q1 is equipped with diagnostic features such as cable fault detection, undervoltage and overtemperature monitoring to streamline system development and maintenance.

filter

Andere Ethernet-PHYs suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	DP83TD555J-Q1 Automotive 10BASE-T1S Multidrop OA SPI MAC-PHY Ethernet Transceiver datasheet	PDF \| HTML	15 Dez 2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DP83TD555EVM — DP83TD555 – Evaluierungsmodul

Das DP83TD555EVM unterstützt das 10BASE-T1S-Ethernet-Protokoll auf der medienabhängigen Schnittstelle über einen Schraubklemmenanschluss. Dieses EVM ist an der SPI-Schnittstelle mit MikroBUS-Anschluss ausgestattet, der mehrere EP-Ökosysteme von TI, Rapberry PI und andere MCU-Ökosysteme auf dem (...)

Benutzerhandbuch: PDF | HTML

Anfordern

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese Design- und Simulationssuite mit vollem Funktionsumfang verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
— (—)	—

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

DP83TD555J-Q1

10BASE-T1S SPI-PHY mit integriertem MAC

DP83TD555J-Q1

Produktdetails

Technische Dokumentation

Design und Entwicklung

DP83TD555EVM — DP83TD555 – Evaluierungsmodul

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos