Home Energiemanagement Mehrkanal-ICs (PMICs)
Home
Energiemanagement
Mehrkanal-ICs (PMICs)
NEU

TPS650372-Q1

VORSCHAU

Kamera-PMIC für die Automobilindustrie mit drei Abwärtswandlern und einem LDO-Regler in QFN-Gehäuse

Jetzt bestellen
Datenblatt

TPS650372-Q1

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

Processor supplier OmniVision, Sony, onsemi Processor name IMX62x, IMX728, IMXx24, IMXx90 Product type Camera sensor Regulated outputs (#) 4 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 1 Vin (min) (V) 4 Vin (max) (V) 35 Vout (min) (V) 0.6 Vout (max) (V) 5.5 Iout (max) (A) 2.5 Configurability Factory programmable TI functional safety category Functional Safety-Compliant Features ASIL B, Buck Step Down Converter, Single LDO Rating Automotive Operating temperature range (°C) to
Processor supplier OmniVision, Sony, onsemi Processor name IMX62x, IMX728, IMXx24, IMXx90 Product type Camera sensor Regulated outputs (#) 4 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 1 Vin (min) (V) 4 Vin (max) (V) 35 Vout (min) (V) 0.6 Vout (max) (V) 5.5 Iout (max) (A) 2.5 Configurability Factory programmable TI functional safety category Functional Safety-Compliant Features ASIL B, Buck Step Down Converter, Single LDO Rating Automotive Operating temperature range (°C) to
WQFN-HR (VAT) 18 7.5 mm² (3 mm × 2.5 mm)
  • Qualified for automotive applications
  • AEC-Q100 qualified with following results:
    • Device operates from 4V to 18V input supply
    • Input supply 36V tolerant
    • Device temperature grade 1: -40°C to +125°C
  • Functional Safety -Compliant targeted
    • Developed for functional safety applications
    • Documentation to aid ISO26262 and IEC61508 system design available upon product release
    • Systematic capability and hardware integrity up to ASIL-B targeted
    • Under/overvoltage monitors with Built-In Self-Test
    • Temperature warning and thermal shutdown
  • Mid-VIN step-down converter BUCK1
    • VIN range from 4V to 18V
    • VOUT range from 3V to 5V
    • Output current up to 1.5A for normal operation
    • Output current up to 2.5A for heater mode (limited temperature and VSYS)
    • 2.2MHz switching frequency
  • Two Low-VIN step-down converters BUCK2, BUCK3:
    • VIN range from 2.5V to 5.5V
    • VOUT range from 0.8V to 1.8V
    • Output current 2A for BUCK2, 1A for BUCK3
    • 2.2MHz or 4.4MHz switching frequency
  • One low dropout (LDO) regulator:
    • VIN range from 2.5V to 5.5V
    • VOUT range from 1.2V to 3.3V
    • Up to 300mA output current
    • Low noise and high PSRR
  • 3mm × 2.5mm 18-pin WQFN-HR with wettable flanks
  • Qualified for automotive applications
  • AEC-Q100 qualified with following results:
    • Device operates from 4V to 18V input supply
    • Input supply 36V tolerant
    • Device temperature grade 1: -40°C to +125°C
  • Functional Safety -Compliant targeted
    • Developed for functional safety applications
    • Documentation to aid ISO26262 and IEC61508 system design available upon product release
    • Systematic capability and hardware integrity up to ASIL-B targeted
    • Under/overvoltage monitors with Built-In Self-Test
    • Temperature warning and thermal shutdown
  • Mid-VIN step-down converter BUCK1
    • VIN range from 4V to 18V
    • VOUT range from 3V to 5V
    • Output current up to 1.5A for normal operation
    • Output current up to 2.5A for heater mode (limited temperature and VSYS)
    • 2.2MHz switching frequency
  • Two Low-VIN step-down converters BUCK2, BUCK3:
    • VIN range from 2.5V to 5.5V
    • VOUT range from 0.8V to 1.8V
    • Output current 2A for BUCK2, 1A for BUCK3
    • 2.2MHz or 4.4MHz switching frequency
  • One low dropout (LDO) regulator:
    • VIN range from 2.5V to 5.5V
    • VOUT range from 1.2V to 3.3V
    • Up to 300mA output current
    • Low noise and high PSRR
  • 3mm × 2.5mm 18-pin WQFN-HR with wettable flanks

The TPS65037x-Q1 device is a highly integrated power management IC for automotive camera modules. This device combines three step-down converters and one low-dropout (LDO) regulator. The BUCK1 step-down converter operating input voltage range is up to 18V. The device can tolerate input voltage up to 36V (not recommended for a prolonged time period). All converters operate in a forced fixed-frequency PWM mode and support optional Spread-Spectrum Modulation (SSM) for EMI reduction. The LDO can supply 300mA and operate with an input voltage range from 2.5V to 5.5V. The TPS65037x-Q1 supports I2C control interface with interrupt pin or, alternatively, three GPIOs.

The TPS65037x-Q1 is available in a 18-pin WQFN-HR package (3mm × 2.5mm).

The TPS65037x-Q1 device is a highly integrated power management IC for automotive camera modules. This device combines three step-down converters and one low-dropout (LDO) regulator. The BUCK1 step-down converter operating input voltage range is up to 18V. The device can tolerate input voltage up to 36V (not recommended for a prolonged time period). All converters operate in a forced fixed-frequency PWM mode and support optional Spread-Spectrum Modulation (SSM) for EMI reduction. The LDO can supply 300mA and operate with an input voltage range from 2.5V to 5.5V. The TPS65037x-Q1 supports I2C control interface with interrupt pin or, alternatively, three GPIOs.

The TPS65037x-Q1 is available in a 18-pin WQFN-HR package (3mm × 2.5mm).
filter Andere Mehrkanal-ICs (PMICs) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS65037x-Q1 Automotive Camera PMIC datasheet PDF | HTML 07.01.2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS65037EVM — TPS65037x-Q1-Evaluierungsmodul

Das TPS65037EVM ist eine Evaluierungsplatine für die Power-Management-IC-Bausteine (PMIC) der Serie TPS65037x-Q1. Das EVM enthält einen integrierten USB-zu-I2C-Adapter, Stromversorgungsklemmen und Jumper für alle DC-Reglereingänge und -ausgänge sowie Prüfpunkte für übliche Messungen.
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
GUI für Evaluierungsmodul (EVM)

TPS65037X-GUI — Grafische Benutzerschnittstelle (GUI) TPS65037X

Graphical user interface used to communicate with the TPS65037X PMIC through I2C and evaluate device functionality and performance.
Unterstützte Produkte und Hardware
Zertifizierung

TPS65037EVM-DOC-CERT — TPS65037EVM EU Declaration of Conformity (DoC)

TPS65037EVM EU Declaration of Conformity (DoC)
Unterstützte Produkte und Hardware
Designtool

TPS65037X-Q1-FS — TPS65037X-Q1-FS-Ordner

TPS65037x-Q1 series functional safety documents
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN-HR (VAT) 18 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos