DS36C200

現行

雙高速雙向差動收發器

產品詳細資料

Function Transceiver Protocols LVDS Number of transmitters 2 Number of receivers 2 Supply voltage (V) 5 Signaling rate (MBits) 100 Input signal LVDS, TTL Output signal LVDS, TTL Rating Catalog Operating temperature range (°C) 0 to 70
Function Transceiver Protocols LVDS Number of transmitters 2 Number of receivers 2 Supply voltage (V) 5 Signaling rate (MBits) 100 Input signal LVDS, TTL Output signal LVDS, TTL Rating Catalog Operating temperature range (°C) 0 to 70
SOIC (D) 14 51.9 mm² 8.65 x 6
  • Optimized for DSS to DVHS Interface Link
  • Compatible IEEE 1394 Signaling Voltage Levels
  • Operates Above 100 Mbps
  • Bi-directional Transceivers
  • 14-lead SOIC Package
  • Ultra Low Power Dissipation
  • ±100 mV Receiver Sensitivity
  • Low Differential Output Swing Typical 210 mV
  • High Impedance During Power Off

All trademarks are the property of their respective owners.

  • Optimized for DSS to DVHS Interface Link
  • Compatible IEEE 1394 Signaling Voltage Levels
  • Operates Above 100 Mbps
  • Bi-directional Transceivers
  • 14-lead SOIC Package
  • Ultra Low Power Dissipation
  • ±100 mV Receiver Sensitivity
  • Low Differential Output Swing Typical 210 mV
  • High Impedance During Power Off

All trademarks are the property of their respective owners.

The DS36C200 is a dual transceiver device optimized for high data rate and low power applications. This device provides a single chip solution for a dual high speed bi-directional interface. Also, both control pins may be routed together for single bit control of datastreams. Both control pins are adjacent to each other for ease of routing them together. The DS36C200 is compatible with IEEE 1394 physical layer and may be used as an economical solution with some considerations. Please reference the application information on 1394 for more information. The device is in a 14-lead small outline package. The differential driver outputs provides low EMI with its low output swings typically 210 mV. The receiver offers ±100 mV threshold sensitivity, in addition to common-mode noise protection.

The DS36C200 is a dual transceiver device optimized for high data rate and low power applications. This device provides a single chip solution for a dual high speed bi-directional interface. Also, both control pins may be routed together for single bit control of datastreams. Both control pins are adjacent to each other for ease of routing them together. The DS36C200 is compatible with IEEE 1394 physical layer and may be used as an economical solution with some considerations. Please reference the application information on 1394 for more information. The device is in a 14-lead small outline package. The differential driver outputs provides low EMI with its low output swings typically 210 mV. The receiver offers ±100 mV threshold sensitivity, in addition to common-mode noise protection.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet DS36C200 Dual High Speed Bi-Directional Differential Transceiver datasheet (Rev. D) 2013年 4月 15日
Application brief How Far, How Fast Can You Operate LVDS Drivers and Receivers? 2018年 8月 3日
Application note An Overview of LVDS Technology 1998年 10月 5日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

DS36C200 IBIS Model

SNLM072.ZIP (4 KB) - IBIS Model
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 引腳 下載
SOIC (D) 14 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片