產品詳細資料

Number of ADC channels 8 Analog inputs 0 Digital audio interface I2S, L, TDM Control interface I2C, SPI Sampling rate (max) (kHz) 768 ADC SNR (typ) (dB) 127 Rating Catalog Analog outputs 0 Operating temperature range (°C) -40 to 125
Number of ADC channels 8 Analog inputs 0 Digital audio interface I2S, L, TDM Control interface I2C, SPI Sampling rate (max) (kHz) 768 ADC SNR (typ) (dB) 127 Rating Catalog Analog outputs 0 Operating temperature range (°C) -40 to 125
WQFN (RTW) 24 16 mm² 4 x 4
  • 8-channel PDM microphones simultaneous conversion
  • PDM input to TDM or I2S output converter performance:
    • 127-dB dynamic range (DR) with high performance 5th order PDM input
    • 117-dB dynamic range (DR) with high performance 4th order PDM input
  • Channel summing mode, DR performance with high performance 4th order PDM input:
    • 120-dB, 2-channel summing
    • 123-dB, 4-channel summing
  • Programmable PDM clock output :
    • 768 kHz to 6.144 MHz
  • Programmable output sample rate (fS) :
    • 8 kHz to 768 kHz
  • Programmable channel settings:
    • Digital volume control: –100 dB to 27 dB
    • Gain calibration with 0.1-dB resolution
    • Phase calibration with 163-ns resolution
  • Microphone bias or supply voltage generation
  • Low-latency signal processing filter selection
  • Programmable HPF and biquad digital filters
  • I2C or SPI controls
  • Integrated high-performance audio PLL
  • Automatic clock divider setting configurations
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16 bits, 20 bits, 24 bits, or 32 bits
    • Master or slave interface
  • Single-supply operation: 3.3 V or 1.8 V
  • I/O-supply operation: 3.3 V or 1.8 V
  • Power consumption for 1.8-V supply:
    • 2.9 mW/channel at 16-kHz sample rate
    • 2.5 mW/channel at 48-kHz sample rate
  • 8-channel PDM microphones simultaneous conversion
  • PDM input to TDM or I2S output converter performance:
    • 127-dB dynamic range (DR) with high performance 5th order PDM input
    • 117-dB dynamic range (DR) with high performance 4th order PDM input
  • Channel summing mode, DR performance with high performance 4th order PDM input:
    • 120-dB, 2-channel summing
    • 123-dB, 4-channel summing
  • Programmable PDM clock output :
    • 768 kHz to 6.144 MHz
  • Programmable output sample rate (fS) :
    • 8 kHz to 768 kHz
  • Programmable channel settings:
    • Digital volume control: –100 dB to 27 dB
    • Gain calibration with 0.1-dB resolution
    • Phase calibration with 163-ns resolution
  • Microphone bias or supply voltage generation
  • Low-latency signal processing filter selection
  • Programmable HPF and biquad digital filters
  • I2C or SPI controls
  • Integrated high-performance audio PLL
  • Automatic clock divider setting configurations
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16 bits, 20 bits, 24 bits, or 32 bits
    • Master or slave interface
  • Single-supply operation: 3.3 V or 1.8 V
  • I/O-supply operation: 3.3 V or 1.8 V
  • Power consumption for 1.8-V supply:
    • 2.9 mW/channel at 16-kHz sample rate
    • 2.5 mW/channel at 48-kHz sample rate

The PCMD3180 is a high-performance, pulse-density-modulation (PDM) input to time-division multiplexing (TDM) or I2S output converter that supports simultaneous sampling of up to eight digital channels for the PDM microphone input. The device integrates programable digital volume control, a microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for output sample rates up to 768 kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI interface. Additionally, the PCMD3180 supports master and slave mode selection for the audio bus interface operation. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3 V or 1.8 V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.

The PCMD3180 is specified from –40°C to +125°C, and is offered in a 24-pin WQFN package.

The PCMD3180 is a high-performance, pulse-density-modulation (PDM) input to time-division multiplexing (TDM) or I2S output converter that supports simultaneous sampling of up to eight digital channels for the PDM microphone input. The device integrates programable digital volume control, a microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for output sample rates up to 768 kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI interface. Additionally, the PCMD3180 supports master and slave mode selection for the audio bus interface operation. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3 V or 1.8 V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.

The PCMD3180 is specified from –40°C to +125°C, and is offered in a 24-pin WQFN package.

下載 觀看有字幕稿的影片 影片
Information

要求更多資訊

提供 PurePath™ Console 3、PCMD3180 GUI 和其他設計資源。立即索取

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品
PCMD3140 現行 四通道 PDM 輸入至 TDM 或 I²S 輸出轉換器 Identical performance; supports four digital microphones, smaller package

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet PCMD3180 Octal-Channel, PDM Input to TDM or I2S Output Converter datasheet PDF | HTML 2019年 8月 14日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADC3140EVM-PDK — TLV320ADC3140 四通道 768-kHz Burr-Brown™ 音訊 ADC 評估模組

The ADC3140EVM-PDK is an evaluation module (EVM) that allows the user to test the capabilities of the TLV320ADC3140 device, which is a quad-channel, high-performance audio analog-to-digital converter (ADC). TLV320ADC3140 is intended for voice-activated systems, professional (...)

使用指南: PDF
驅動程式或資料庫

PCMD31XX-DRIVERS — PCMD31xx ADC 系列 Linux 驅動程式支援

These Linux drivers support our low-power audio analog-to-digital converters (ADCs) in the PCMD31xx device family, and include both .c and .h files. The "Go to third party" buttons below will allow you to downlod the appropriate drivers from git.kernal.org.

Linux main line status
Available in Linux (...)
支援軟體

SBAC292 PCMD31x0 C Source Headers

支援產品和硬體

支援產品和硬體

產品
音訊 ADC
PCMD3140 四通道 PDM 輸入至 TDM 或 I²S 輸出轉換器 PCMD3180 八通道脈衝密度調變輸入至 TDM 或 I²S 輸出轉換器
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 引腳 下載
WQFN (RTW) 24 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片