首頁 介面 USB IC USB Type-C 與 USB 電源傳輸 IC
首頁
介面
USB IC
USB Type-C 與 USB 電源傳輸 IC

TPS25750

現行

具有預先配置 GUI 的高度整合 USB Type-C ® 和 USB PD 控制器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相似於所比較的產品
最新 TPS25751 預覽 USB Type-C® and USB Power Delivery (PD) controller with integrated power switches Supports PD3.1 with liquid detection and PPS support

TPS25750

現行
產品規格表 立即訂購

產品詳細資料

Function Type-C Type PD controller Power role DRP, Sink Alternate mode No External power-path control NFET Data role DFP, DRD, DRP Internal power path 20 V 5 A, 5 V 3 A Rating Catalog Dead battery support Yes Operating temperature range (°C) -40 to 125
Function Type-C Type PD controller Power role DRP, Sink Alternate mode No External power-path control NFET Data role DFP, DRD, DRP Internal power path 20 V 5 A, 5 V 3 A Rating Catalog Dead battery support Yes Operating temperature range (°C) -40 to 125
VQFN (RSM) 32 16 mm² 4 x 4 WQFN (RJK) 38 24 mm² 6 x 4

  • Integrated fully managed power paths

    • Integrated 5-V, 3-A, 36-mΩ sourcing switch (TPS25750S/D)

    • Integrated 28-V, 7-A, 16-mΩ bi-directional load switch (TPS25750D only)

  • Standalone USB Type-C PD solution

    • No firmware development or external micro-controller needed

  • Integrated robust power path protection

    • Integrated reverse current protection, overvoltage protection, and slew rate control the high-voltage bi-directional power path

    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for the 5V/3A source power path
    • 26-V tolerant CC pins for robust protection when connected to non-compliant devices
  • Optimized for power applications
    • Integrated I2C control for TI battery chargers
    • Web-based GUI and pre-configured firmware
    • Optimized for power consumer only (sink) (UFP) applications
    • Optimized for power provider (source) and power consumer (sink) (DRP) applications
  • USB Type-C power delivery (PD) controller
    • 10 configurable GPIOs
    • BC1.2 charging support
    • USB PD 3.0 compliant
    • USB Type-C specification complaint
    • Cable attach and orientation detection
    • Integrated VCONN switch
    • Physical layer and policy engine
    • 3.3-V LDO output for dead battery support
    • Power supply from 3.3 V or VBUS source

  • Integrated fully managed power paths

    • Integrated 5-V, 3-A, 36-mΩ sourcing switch (TPS25750S/D)

    • Integrated 28-V, 7-A, 16-mΩ bi-directional load switch (TPS25750D only)

  • Standalone USB Type-C PD solution

    • No firmware development or external micro-controller needed

  • Integrated robust power path protection

    • Integrated reverse current protection, overvoltage protection, and slew rate control the high-voltage bi-directional power path

    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for the 5V/3A source power path
    • 26-V tolerant CC pins for robust protection when connected to non-compliant devices
  • Optimized for power applications
    • Integrated I2C control for TI battery chargers
    • Web-based GUI and pre-configured firmware
    • Optimized for power consumer only (sink) (UFP) applications
    • Optimized for power provider (source) and power consumer (sink) (DRP) applications
  • USB Type-C power delivery (PD) controller
    • 10 configurable GPIOs
    • BC1.2 charging support
    • USB PD 3.0 compliant
    • USB Type-C specification complaint
    • Cable attach and orientation detection
    • Integrated VCONN switch
    • Physical layer and policy engine
    • 3.3-V LDO output for dead battery support
    • Power supply from 3.3 V or VBUS source

The TPS25750 is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for applications supporting USB-C PD Power. The TPS25750 integrates fully managed power paths with robust protection for a complete USB-C PD solution. The TPS25750 also integrates control for external battery charger ICs for added ease of use and reduced time to market. The intuitive web based GUI will ask the user a few simple questions on the applications needs using clear block diagrams and simple multiple-choice questions. As a result, the GUI will create the configuration image for the user’s application, reducing much of the complexity associated with competitive USB PD solutions.

The TPS25750 is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for applications supporting USB-C PD Power. The TPS25750 integrates fully managed power paths with robust protection for a complete USB-C PD solution. The TPS25750 also integrates control for external battery charger ICs for added ease of use and reduced time to market. The intuitive web based GUI will ask the user a few simple questions on the applications needs using clear block diagrams and simple multiple-choice questions. As a result, the GUI will create the configuration image for the user’s application, reducing much of the complexity associated with competitive USB PD solutions.
open-in-new 尋找其它 USB Type-C 與 USB 電源傳輸 IC
下載 觀看有字幕稿的影片 影片
Information

要求更多資訊

  • TPS25750 圖形使用者介面 (GUI) 可使用。開始開發
  • 若您設計的電池供電系統為 45 W 以下、請考慮新增我們的搭配裝置配套裝置 BQ25792 或 BQ25790 以完成您的設計。
  • 若您設計的電池供電系統為 45 W 以上、請考慮新增我們的搭配裝置 BQ25731 以完成您的設計

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet TPS25750 USB Type-C and USB PD Controller with Integrated Power Switches datasheet (Rev. A) 2020年 11月 12日
User guide TPS25750 Host Interface Technical Reference Manual (Rev. A) PDF | HTML 2022年 7月 12日
White paper A Primer on USB Type-C and Power Delivery Applications and Requirements (Rev. B) PDF | HTML 2022年 3月 25日
User guide TPS25750 Application Customization Tool User's Guide PDF | HTML 2021年 2月 17日
Technical article Adding USB Type-C® with USB Power Delivery to battery-powered applications PDF | HTML 2020年 11月 11日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS25750EVM — TPS25750 高度整合式 USB Type-C® 和 USB PD 控制器評估模組

TPS25750EVM 是適合單埠 USB Type-C® 與法規範以及電源傳輸 (PD) 應用的完整參考設計。方便使用者開發各種電源設定檔，並可偵錯現有的 USB Type-C 及電源傳輸系統。

使用指南: PDF | HTML
檢視選項
開發板

USB-PD-CHG-EVM-01 — 整合式 USB Type-C® 電力傳輸 (PD) 和 2-4 芯電池 EVM 的充電參考設計

USB-PD-CHG-EVM-01 評估模組 (EVM) 可用來一起評估 BQ25798 裝置與 TPS25750 裝置。BQ25798 是採用 HOTROD (QFN) 封裝的整合式切換模式降壓升壓電池充電管理裝置，適用 3.6-24-V 輸入的 1 至 4 串聯電池芯鋰離子與鋰聚合物電池。TPS25750 為一款 USB Type-C 與 PD 控制器，可在內部供應和汲取 20-V/5-A 電流。I2C 序列介面可讓 PD 控制器驅動電池充電器，同時由主機驅動，讓這套組合成為真正靈活的解決方案

使用指南: PDF | HTML
TI.com 無法提供
開發模組 (EVM) 的 GUI

USBCPD-APPLICATION-CUSTOMIZATION-TOOL — Application customization tool for TI USB-C® PD controllers

The USBCPD-APPLICATION-CUSTOMIZATION-TOOL enables application-specific device configuration and programming of certain USB Power Delivery controllers. The GUI is compatible with the corresponding hardware evaluation modules (EVMs) as well as custom hardware designs using the generated application (...)

支援產品和硬體

支援產品和硬體

產品
USB Type-C 與 USB 電源傳輸 IC
TPS25751 — USB Type-C® and USB Power Delivery (PD) controller with integrated power switches TPS25750 — 具有預先配置 GUI 的高度整合 USB Type-C ® 和 USB PD 控制器
硬體開發
開發板
TPS25751EVM — TPS25751 評估模組 TPS25750EVM — TPS25750 高度整合式 USB Type-C® 和 USB PD 控制器評估模組
啟動
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
檢視選項
參考設計

TIDA-050047 — 整合式 USB Type-C® 電力傳輸 (PD) 和 2-4 芯電池的充電參考設計

此參考設計可在 5 A 電流下充電至 20 V，無需任何外部 FET，進而大幅縮小解決方案尺寸，並降低總 BOM 成本。此外也不需要微處理器，因為 TPS25750 電力傳輸 (PD) 控制器會處理與 BQ25798 電池充電器 IC 的 I2C 通訊。此 I2C 功能與 TPS25750 Web 架構 GUI 可大幅簡化韌體開發程序。
Design guide: PDF
電路圖: PDF
參考設計

PMP41013 — 適用於一至五節電池的整合式 USB Type-C® PD 雙向充電參考設計

此參考設計是一款整合 USB Type-C® 電力輸送 (PD) 和充電參考設計 (使用一至五節電池)，適合 USB Type-C 埠的電動工具充電器、真空吸塵器、可攜式充電器等領域之應用。
Test report: PDF
封裝 引腳 下載
VQFN (RSM) 32 檢視選項
WQFN (RJK) 38 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片