TPS5402

現行

具整合式 MOSFET 且具 3.5V 至 28V 輸入 1.7A 輸出非同步降壓穩壓器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 1.7 Vin (max) (V) 28 Vin (min) (V) 3.5 Vout (max) (V) 26 Vout (min) (V) 0.8 Features Adjustable soft start, Fixed Output, Light-load efficiency, Spread Spectrum EMI features Spread Spectrum Control mode current mode Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1100 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 100 Duty cycle (max) (%) 93 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 1.7 Vin (max) (V) 28 Vin (min) (V) 3.5 Vout (max) (V) 26 Vout (min) (V) 0.8 Features Adjustable soft start, Fixed Output, Light-load efficiency, Spread Spectrum EMI features Spread Spectrum Control mode current mode Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1100 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 100 Duty cycle (max) (%) 93 Type Converter
SOIC (D) 8 29.4 mm² 4.9 x 6
  • 3.5-V to 28-V Wide Input Voltage Range
  • Up to 1.7-A Maximum Continuous Output Loading Current
  • Pulse Skipping Mode to Achieve High Light Load Efficiency
  • High Light Load Efficiency
  • Frequency Spread Spectrum to Reduce EMI
  • Adjustable 50-kHz to 1.1-MHz Switching Frequency Set by an External Resistor
    (Leave pin ROSC floating. Set frequency to 120 kHz and ground connection to 70 kHz)
  • Frequency Spread Spectrum to Ease EMI Issue
  • Peak Current-Mode Control
  • Cycle-by-CycleOver Current Protection
  • External Soft Start
  • Available in SOIC8 Package
  • 3.5-V to 28-V Wide Input Voltage Range
  • Up to 1.7-A Maximum Continuous Output Loading Current
  • Pulse Skipping Mode to Achieve High Light Load Efficiency
  • High Light Load Efficiency
  • Frequency Spread Spectrum to Reduce EMI
  • Adjustable 50-kHz to 1.1-MHz Switching Frequency Set by an External Resistor
    (Leave pin ROSC floating. Set frequency to 120 kHz and ground connection to 70 kHz)
  • Frequency Spread Spectrum to Ease EMI Issue
  • Peak Current-Mode Control
  • Cycle-by-CycleOver Current Protection
  • External Soft Start
  • Available in SOIC8 Package

The TPS5402 is a monolithic non-synchronous buck regulator with wide operating input voltage range from 3.5 V to 28 V. Current mode control with internal slope compensation is implemented to reduce component count.

TPS5402 also features a light load pulse skipping mode, which allows for a power loss reduction from the input power supply to the system at light loading.

The switching frequency of the converters can be set from 50 kHz to 1.1 MHz with an external resistor. Frequency spread spectrum operation is introduced for EMI reduction.

A cycle-by-cycle current limit with frequency fold back protects the IC at over loading condition.

The TPS5402 is a monolithic non-synchronous buck regulator with wide operating input voltage range from 3.5 V to 28 V. Current mode control with internal slope compensation is implemented to reduce component count.

TPS5402 also features a light load pulse skipping mode, which allows for a power loss reduction from the input power supply to the system at light loading.

The switching frequency of the converters can be set from 50 kHz to 1.1 MHz with an external resistor. Frequency spread spectrum operation is introduced for EMI reduction.

A cycle-by-cycle current limit with frequency fold back protects the IC at over loading condition.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet Monolithic Non-Synchronous Step-Down Regulator With Integrated MOSFET . datasheet 2012年 9月 12日
User guide TPS5402EVM Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2021年 11月 1日
Application note Lead-Acid Charger and LED Driver using TPS5402 (Rev. A) 2013年 6月 13日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS5402EVM — TPS5402 評估模組

The TPS5402EVM is a fully assembled and tested circuit for evaluating the TPS5402 non-synchronous step-down SWIFT™ converter. The EVM converts a 3.5-V to 28-V input voltage to a regulated 3.3-V output voltage that delivers up to 1.7 A. The TPS5402EVM is designed with an external fixed (...)

使用指南: PDF | HTML
TI.com 無法提供
參考設計

TIDEP0025 — 適用於工業通訊和馬達控制的單晶片驅動

This reference design implements hardware interface based on the HEIDENHAIN EnDat 2.2 standard for position or rotary encoders. The platform also allows you to implement real-time EtherCAT communications standards in a broad range of industrial automation equipment. It enables designs with a low (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDEP0039 — 適用於 AM437x 通訊開發平台的 Sercos III 從屬功能參考設計

The TIDEP0039 Sercos III Slave For AM437x Communication Development Platform Reference Design combines the AM437x Sitara processor family from Texas Instruments (TI) and the Sercos III media access control (MAC) layer into a single system-on-chip (SoC) solution. Targeted for Sercos III slave (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDEP0022 — 具有整合式 BiSS C 主介面的 ARM MPU 參考設計

Implementation of BiSS C Master protocol on Industrial Communication Sub-System (PRU-ICSS). The design provides full documentation and source code for Programmable Realtime Unit (PRU).
Design guide: PDF
電路圖: PDF
參考設計

TIDEP0035 — 具有整合式 HIPERFACE DSL 主介面的 ARM MPU 參考設計

此參考設計在工業通訊子系統 (PRU-ICSS) 上實作 HIPERFACE DSL 主協定。雙線介面允許將位置回饋線路整合至馬達纜線中。  它由 AM437x PRU-ICSS 韌體和 TIDA-00177 收發器參考設計組成。
Design guide: PDF
電路圖: PDF
參考設計

TIDEP0050 — EnDat 2.2 系統參考設計

This reference design implements EnDat 2.2 Master protocol stack and hardware interface based on HEIDENHAIN EnDat 2.2 standard for position or rotary encoders. The design is composed of EnDat 2.2 Master protocol stack, half-duplex communications using RS-485 transceivers and the line termination (...)
Design guide: PDF
電路圖: PDF
參考設計

PMP4408 — 離線 AC/DC 120W 多輸出返馳電源供應參考設計

The PMP4408 is a universal AC input, 120W flyback converter reference design. The LM5023 Quasi Resonant Flyback converter was chosen to get 2 high-efficiency isolated outputs. Additionally a downstream Buck converter, the TPS5402 enables 2 high-efficiency non-isolated outputs. The QR Flyback design (...)
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片