首頁 電源管理 LED 驅動器 汽車 LED 驅動器
首頁
電源管理
LED 驅動器
汽車 LED 驅動器
最新

TPS92541-Q1

現行

車用 65V 同步升壓控制器和 2A 單通道同步 CC/CV 降壓轉換器

立即訂購
產品規格表

TPS92541-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Topology Boost Controller, Buck Controller Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 65 Vout (min) (V) 1 Vout (max) (V) 65 Iout (max) (A) 2 Iq (typ) (mA) 2000 Switching frequency (max) (kHz) 1000 Features Fault Detection, LED Open Detection, LED Short Detection, Precise dimming control, Thermal Error Flag, Thermal shutdown
Number of channels 1 Topology Boost Controller, Buck Controller Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 65 Vout (min) (V) 1 Vout (max) (V) 65 Iout (max) (A) 2 Iq (typ) (mA) 2000 Switching frequency (max) (kHz) 1000 Features Fault Detection, LED Open Detection, LED Short Detection, Precise dimming control, Thermal Error Flag, Thermal shutdown
HTQFP (PHP) 48 81 mm² 9 x 9 HTQFP (PKD) 48 81 mm² 9 x 9
  • AEC-Q100 qualified for automotive applications
    • Grade 1: –40°C to 125°C ambient operating temperature
    • Device HBM classification level H1C
    • Device CDM classification level C5
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
  • 4.5V to 65V wide input voltage range
  • Synchronous Buck with integrated switches
  • Configurable Constant Voltage (CV) and Constant Current (CC) operation
    • Up to 2A continuous output current with 4% accuracy
    • 4% regulation accuracy (voltage and current mode)
  • Synchronous BOOST controller
    • Programmable output voltage up to 65V
  • BOOST and BUCK spread-spectrum for EMI mitigation
  • BUCK switch thermal protection
  • UART serial communication
    • Internal oscillator for system clock
    • LMM compatible
  • Internal EEPROM
    • Default settings
    • Customer calibration data
  • AEC-Q100 qualified for automotive applications
    • Grade 1: –40°C to 125°C ambient operating temperature
    • Device HBM classification level H1C
    • Device CDM classification level C5
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
  • 4.5V to 65V wide input voltage range
  • Synchronous Buck with integrated switches
  • Configurable Constant Voltage (CV) and Constant Current (CC) operation
    • Up to 2A continuous output current with 4% accuracy
    • 4% regulation accuracy (voltage and current mode)
  • Synchronous BOOST controller
    • Programmable output voltage up to 65V
  • BOOST and BUCK spread-spectrum for EMI mitigation
  • BUCK switch thermal protection
  • UART serial communication
    • Internal oscillator for system clock
    • LMM compatible
  • Internal EEPROM
    • Default settings
    • Customer calibration data

The TPS92541-Q1 device contains a synchronous BOOST controller and a monolithic synchronous buck LED driver with a wide 4.5V to 65V operating BUCK input voltage range.

The synchronous BOOST controller implements a peak current-mode controller to operate in constant voltage mode. The Boost can be programmed to operate as dual-phase, or three-phase together with other TPS92541-Q1 devices. The output voltage can be programmed using a programmable 8-bit DAC. The BOOST controller incorporates programmable frequency modulation technique for EMI reduction.

The monolithic synchronous BUCK implements an adaptive on-time average current mode control and is designed to generate constant voltage (CV) or constant current (CC) output. In the CC mode, the BUCK is compatible with shunt FET dimming techniques and LED matrix manager-based dynamic beam headlamps. In CV mode, the adaptive on-time control enables high bandwidth operation with fast transient response. The adaptive on-time control provides near constant switching frequency that can be set between 100kHz and 1.0MHz. Inductor current sensing and closed-loop feedback enable better than ±4% accuracy over wide input voltage, output voltage and ambient temperature range. In CC mode, the BUCK can independently modulate LED current using both analog or PWM dimming techniques.

The TPS92541-Q1 includes an internal oscillator. The UART serial interface is compatible with TPS9266x, and TPS9254x devices. The internal EEPROM can store system defaults as well as calibration and lighting module data. The seven configurable MPIOs and DIOs can be set as digital inputs or outputs, or ADC inputs for applications with system temperature compensation, LED binning and coding, etc.

The TPS92541-Q1 is available in a 7.0mm × 7.0mm thermally-enhanced 48-pin HTQFP package.

The TPS92541-Q1 device contains a synchronous BOOST controller and a monolithic synchronous buck LED driver with a wide 4.5V to 65V operating BUCK input voltage range.

The synchronous BOOST controller implements a peak current-mode controller to operate in constant voltage mode. The Boost can be programmed to operate as dual-phase, or three-phase together with other TPS92541-Q1 devices. The output voltage can be programmed using a programmable 8-bit DAC. The BOOST controller incorporates programmable frequency modulation technique for EMI reduction.

The monolithic synchronous BUCK implements an adaptive on-time average current mode control and is designed to generate constant voltage (CV) or constant current (CC) output. In the CC mode, the BUCK is compatible with shunt FET dimming techniques and LED matrix manager-based dynamic beam headlamps. In CV mode, the adaptive on-time control enables high bandwidth operation with fast transient response. The adaptive on-time control provides near constant switching frequency that can be set between 100kHz and 1.0MHz. Inductor current sensing and closed-loop feedback enable better than ±4% accuracy over wide input voltage, output voltage and ambient temperature range. In CC mode, the BUCK can independently modulate LED current using both analog or PWM dimming techniques.

The TPS92541-Q1 includes an internal oscillator. The UART serial interface is compatible with TPS9266x, and TPS9254x devices. The internal EEPROM can store system defaults as well as calibration and lighting module data. The seven configurable MPIOs and DIOs can be set as digital inputs or outputs, or ADC inputs for applications with system temperature compensation, LED binning and coding, etc.

The TPS92541-Q1 is available in a 7.0mm × 7.0mm thermally-enhanced 48-pin HTQFP package.
filter 尋找其它 汽車 LED 驅動器
下載 觀看有字幕稿的影片 影片

索取更多資訊

提供完整產品規格表和其它資訊。立即索取

提供功能安全手冊、報告和定量分析報告 - 需要 NDA。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TPS92541-Q1 65V Automotive Synchronous Boost Controller, and 2A Synchronous CC/CV Buck Converter datasheet (Rev. A) PDF | HTML 2025年 10月 9日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LEDMCUEVM-132 — 適用 LED 評估模組的 MSP432E401Y MCU 通訊板

LEDMCUEVM-132 搭載支援匯流排上多個裝置的 SPI 通訊、LMM 系列裝置的 UART 通訊、用於 UART 控制 LMM 系列裝置的 CAN 收發器、4 個用於調光的 PWM 訊號、多個 IO、隔離式 5-V 電源、數位隔離器、以及配備收發器的標準 CAN 匯流排。

使用指南: PDF | HTML
要求
開發板

TPS92541EVM — TPS92541-Q1 評估模組

TPS92543-Q1 和 TPS92541-Q1 裝置實作在定電壓 (CV) 模式下具有尖峰電流模式控制器的同步升壓控制器，以及具適應性開啟時間平均電流模式控制的單晶片同步降壓 LED 驅動器。TPS92541-Q1 設計為與分流 FET 調光技術和基於 LED 矩陣管理器的動態光束頭燈相容。適應性開啟時間控制提供接近恆定的切換頻率，可設定在 100kHz 和 1MHz 之間。電感器電流感測及閉迴路回饋可在廣泛輸入電壓、輸出電壓及環境溫度範圍中實現優於 ±4% 的精確度。
要求
驅動程式或資料庫

TPS9254X-DESIGN-RESOURCES — TPS9254x design resources

TPS9254x Design Resources
支援產品和硬體

支援產品和硬體

產品
汽車 LED 驅動器
TPS92541-Q1 — 車用 65V 同步升壓控制器和 2A 單通道同步 CC/CV 降壓轉換器 TPS92542-Q1 — 車用、65V 同步升壓控制器和雙通道 2A 同步 CC/CV 降壓轉換器 TPS92543-Q1 — 配備 2A 同步 CC 降壓與旁路 FET 控制器的車用 65V 同步升壓控制器 TPS92544-Q1 — 車用 65V 同步升壓控制器 2A 同步 CC 降壓和步進馬達梯形動作控制功能
要求
驅動程式或資料庫

TPS9254X-FS-NDA — TPS9254x functional safety documentation - NDA restrictions

TPS9254x functional safety documentation - NDA restrictions
支援產品和硬體

支援產品和硬體

產品
汽車 LED 驅動器
TPS92541-Q1 — 車用 65V 同步升壓控制器和 2A 單通道同步 CC/CV 降壓轉換器 TPS92542-Q1 — 車用、65V 同步升壓控制器和雙通道 2A 同步 CC/CV 降壓轉換器 TPS92543-Q1 — 配備 2A 同步 CC 降壓與旁路 FET 控制器的車用 65V 同步升壓控制器 TPS92544-Q1 — 車用 65V 同步升壓控制器 2A 同步 CC 降壓和步進馬達梯形動作控制功能
要求
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTQFP (PHP) 48 Ultra Librarian
HTQFP (PKD) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片