TUSB1044
- Protocol agnostic reversible 4 channel linear redriver supporting up to 10Gbps
- USB Type-C with USB 3.1 Gen 2 and DisplayPort 2.1 as alternate mode
- Supports processors with USB 3.1 and DisplayPort mux integrated for Type-C applications
- Supports signal conditioning inside Type-C cable
- Cross-point mux for SBU signals
- Linear equalization up to 11dB at 4.05GHz
- GPIO and I2C control for channel direction and equalization
- Advanced power management by monitoring USB power states and snooping DP link training
- Configuration through GPIO or I2C
- Hot-plug capable
- Single 3.3V supply
- Industrial temperature: –40°C to 85°C (TUSB1044I)
- Commercial temperature: 0°C to 70°C (TUSB1044)
- 4mm × 6mm, 0.4mm Pitch, 40-pin QFN package
The TUSB1044 is a USB Type-C Alt Mode redriver switch supporting data rates up to 10Gbps. This protocol-agnostic linear redriver is capable of supporting USB Type-C Alt Mode interfaces including DisplayPort.
The TUSB1044 provides several levels of receive linear equalization to compensate for inter-symbol interference (ISI) due to cable and board trace loss. Operates on a single 3.3V supply and comes in a commercial and industrial temperature range.
All four lanes of the TUSB1044 are reversible making it a versatile signal conditioner that can be used in many applications.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 9 類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TUSB1044 USB TYPE-C™ 10Gbps Multi-Protocol Bidirectional Linear Redriver datasheet (Rev. D) | PDF | HTML | 2024年 4月 8日 |
EVM User's guide | TUSB1044 Evaluation Module User's Guide (Rev. C) | PDF | HTML | 2024年 4月 15日 | |
Application note | TUSB1044 I2C Mode Control and Tuning with TPS6598x and TPS6599x | PDF | HTML | 2021年 9月 28日 | |
Application note | TUSB1044 Configuration Guidelines | 2018年 12月 17日 | ||
White paper | USB3.x Linear Redriver Signal Conditioning Theory and Practical Tuning Method | 2018年 8月 1日 | ||
White paper | Strengthening the USB Type-C signal chain through redrivers | 2017年 8月 21日 | ||
White paper | Alternate Mode for USB Type-C™: Going Beyond USB | 2016年 9月 26日 | ||
White paper | Transition existing products from USB 2.0 OTG to USB Type-C | 2015年 7月 10日 | ||
White paper | Low-cost implementation of USB Type-C | 2015年 7月 7日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TUSB1044RNQEVM — USB Type-C 替代模式訊號轉接驅動器達 10G 評估模組
The TUSB1044 is a USB Type-C Alt Mode redriver switch supporting data rates up to 10 Gbps. This protocol-agnostic linear redriver is capable of supporting USB Type-C Alt Mode interfaces including DisplayPort.
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
參考設計
TIDA-010248 — USB Type-C® 電力輸送和訊號調節器參考設計
此 USB Type-C 電力輸送 (PD) 和 USB Type-C 訊號調節器參考設計提供 5 V 至 20 V 輸出,最大輸出功率 3 A,總輸出功率 60 W。訊號調節器支援 USB 3.2 (10 Gbps)、USB 3.2 x 2 (20 Gbps) 及 DisplayPort 1.4 (8.1 Gbps)。此參考設計適合應用在工業 PC 和 HMI。
Design guide: PDF
封裝 | 引腳 | 下載 |
---|---|---|
WQFN (RNQ) | 40 | 檢視選項 |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。