DRV2605L

ACTIVE

Haptic Driver for ERM and LRA with Built-In Library and Smart Loop Architecture

Top

Product details

Parameters

Haptic actuator type ERM, LRA Features Integrated Haptic Effects, Smart Loop Input signal PWM, Analog, I2C Vs (Min) (V) 2 Vs (Max) (V) 5.2 Vout (Max) (V p-p) 10.4 Iq (Typ) (mA) 0.5 Shutdown current (Typ) (uA) 4 Startup time (ms) 0.7 Operating temperature range (C) -40 to 85 open-in-new Find other Haptic motor drivers

Package | Pins | Size

DSBGA (YZF) 9 3 mm² 1.48 x 1.48 VSSOP (DGS) 10 9 mm² 3 x 3 open-in-new Find other Haptic motor drivers

Features

  • Flexible Haptic and Vibration Driver
    • LRA (Linear Resonance Actuator)
    • ERM (Eccentric Rotating Mass)
  • I2C-Controlled Digital Playback Engine
    • Waveform Sequencer and Trigger
    • Real-Time Playback Mode through I2C
    • I2C Dual-Mode Drive (Open and Closed Loop)
  • Smart-Loop Architecture (Patent Pending Control Algorithm)
    • Automatic Overdrive and Braking
    • Automatic Resonance Tracking and Reporting (LRA Only)
    • Automatic Actuator Diagnostic
    • Automatic Level Calibration
    • Wide Support for Actuator Models
  • Licensed Immersion TouchSense® 2200 Features:
    • Integrated Immersion Effect Library
    • Audio-to-Vibe
  • Drive Compensation Over Battery Discharge
  • Wide Voltage Operation (2 V to 5.2 V)
  • Efficient Differential Switching Output Drive
  • PWM Input with 0% to 100% Duty-Cycle Control Range
  • Hardware Trigger Input
  • Fast Startup Time
  • 1.8-V Compatible, VDD-Tolerant Digital Interface

All trademarks are the property of their respective owners.

open-in-new Find other Haptic motor drivers

Description

The DRV2605L device is a low-voltage haptic driver that includes a haptic-effect library and provides a closed-loop actuator-control system for high-quality tactile feedback for ERM and LRA. This schema helps improve actuator performance in terms of acceleration consistency, start time, and brake time and is accessible through a shared I2C compatible bus or PWM input signal.

The DRV2605L device offers a licensed version of TouchSense 2200 software from Immersion which eliminates the requirement to design haptic waveforms because the software includes over 100 licensed effects (6 ERM libraries and 1 LRA library) and audio-to-vibe features.

Additionally, the real-time playback mode allows the host processor to bypass the library playback engine and play waveforms directly from the host through I2C.

The smart-loop architecture inside the DRV2605L device allows simple auto-resonant drive for the LRA as well as feedback-optimized ERM drive allowing for automatic overdrive and braking. The smart-loop architecture creates a simplified input waveform interface as well as reliable motor control and consistent motor performance. The DRV2605L device also features automatic transition to an open-loop system in the event that an LRA actuator is not generating a valid back-EMF voltage. When the LRA generates a valid back-EMF voltage, the DRV2605L device automatically synchronizes with the LRA. The DRV2605L also allows for open-loop driving through the use of internally-generated PWM. Additionally, the audio-to-vibe mode automatically converts an audio input signal to meaningful tactile effects.

For an important notice regarding Immersion software, see the Legal Notice section.

open-in-new Find other Haptic motor drivers
Download

Technical documentation

= Featured
No results found. Please clear your search and try again. View all 17
Type Title Date
* Datasheet DRV2605L 2- to 5.2-V Haptic Driver for LRA and ERM with Effect Library and Smart-Loop Architecture datasheet (Rev. D) Mar. 28, 2018
User guides Haptic Control Console GUI (Rev. A) Jun. 04, 2018
Application notes Piezo Haptics With Integrated Waveforms: DRV2605L-Q1 and DRV2700 Sep. 27, 2017
User guides Touch Remote Control Reference Design With CapTIvate Technology (Rev. A) Dec. 06, 2016
Technical articles Touch it. Talk to it. Remote control solutions that will change how you interact with the world Jun. 29, 2016
User guides Access Control Panel With BLE, Cap Touch, and Software Integration Ref Design Feb. 27, 2016
Technical articles Solving the problems of mechanical buttons and capacitive touch sensors Feb. 06, 2015
User guides Low-Voltage Battery Buck-Boost Haptic Driver Design Guide Jan. 12, 2015
Technical articles Haptics: More actuators needed? No problem. Dec. 03, 2014
User guides DRV2605L Multi-Driver ERM, LRA Haptics Evaluation Kit Nov. 17, 2014
Technical articles A user interface that says "hello" Nov. 05, 2014
Application notes Haptic Implementation Considerations for Mobile and Wearable Devices Nov. 03, 2014
Application notes LRA Actuators: How to Move Them? Nov. 03, 2014
More literature Haptic Solutions for Wearable Devices (Rev. A) Sep. 30, 2014
User guides DRV2605LDGS Haptic Driver Mini Board Aug. 13, 2014
User guides DRV2605L ERM and LRA Haptic Driver Evaluation Kit (Rev. A) Jun. 10, 2014
Application notes Haptic Energy Consumption Jun. 04, 2014

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
Description

This MSP430™ CapTIvate™ demonstration board (CAPTIVATE-PHONE) is a simple evaluation platform for mutual capacitance capacitive touch sensors using a variety of configurations in a real-world application.  The sensor panel demonstrates how to matrix mutual capacitance touch sensors (...)

Features
  • Interfaces to CapTIvate ecosystem MCU boards
  • Implements 29 capactive touch elements using just 12 CapTIvate IOs
  • Contains 17 buttons, two 4-element sliders, one 3-element wheel, and one guard channel
  • Implements a guard channel for palm rejection
  • Provides haptic feedback using the TI DRV2605L haptic (...)
EVALUATION BOARDS Download
document-generic User guide
$49.00
Description

The DRV-USBCOM-EVM is a USB to multiple protocol board for configuring and controlling Haptic Evaluation Kits using Haptic Control Console.   The board supports I2C, SPI, GPIO, and PWM control for analog and digital pin control functions.

Features

• Standalone USB communication board to interface with Haptic Control Console software

• USB adapter board for control of Haptic Feedback Evaluation Kits (EVMs)

• Supports USB to I2C, SPI, GPIO, and PWM communication

• Upgradable Firmware via USB

• Includes a programmable MSP430F5510

EVALUATION BOARDS Download
document-generic User guide
$49.00
Description

The DRV2605LDGSEVM-M is a 16.33x8.97mm breakout board for the DRV2605L Haptic Driver in MSOP package. It contains the DRV2605L with Smart Loop Algorithm, embedded TouchSense 2200(TM) effects library licensed from Immersion, and adds extended actuator support for Eccentric Rotating Mass (ERM) and (...)

Features
  • DRV2605L with Smart Loop Algorithm
  • Leaded MSOP (DGS) Package 
  • TouchSense 2200™ Effects Library licensed from Immersion
  • Breakout headers for quick prototyping and integration
  • Haptic and Touch Feedback Applications
EVALUATION BOARDS Download
document-generic User guide
$149.00
Description

The DRV2605LEVM-CT is a complete reference design for the DRV2605L ERM and LRA haptics driver.  It contains the DRV2605L with Smart Loop Algorithm, embedded TouchSense 2200 effects library licensed from Immersion, and adds extended actuator support for ERMs and LRAs.  The board includes (...)

Features
  1. DRV2605L with Smart Loop Algorithm
  2. TouchSense 2200™ Effects Library licensed from Immersion
  3. Extended actuator support
  4. ERM and LRA actuators included onboard
  5. Programmable MSP430G2553 with capacitive touch buttons
EVALUATION BOARDS Download
document-generic User guide
$149.00
Description

The DRV2605LEVM-MD evaluation module demonstrates the use of up to eight DRV2605L ERM and LRA drivers for applications that require multiple actuators for either localized and/or strong haptic feedback.  The module includes eight DRV2605L ERM and LRA haptic drivers with an embedded waveform (...)

Features
  • Quick prototyping for localized haptic feedback applications
  • Operate multiple actuators simultaneously to create stronger vibration feedback
  • Contains 8x DRV2605L ERM and LRA Haptic Drivers with embedded waveform library
  • Independent or synchronized control of the eight DRV2605L drivers
  • Standalone or USB (...)

Software development

APPLICATION SOFTWARE & FRAMEWORKS Download
Haptics Control Console Software
HAPTICS-CONSOLE Haptic Control Console is an evaluation and development suite for TI Haptic Drivers.  Haptic Control console supports the evaluation of TI haptic drivers and 3rd party haptic actuators for developing advanced tactile feedback.

Simply connect TI Haptic Driver evaluation modules (EVM) to Haptic Control (...)

Features
  • Supports evaluation of haptic actuators including ERM, LRA, and Piezo actuators.
  • Includes device management features including a quick setup console, complete register map access, and RAM management.
  • Works with TI evaluation boards or can be connected directly to TI haptic drivers on custom boards.
  • USB (...)
DRIVERS & LIBRARIES Download
Linux Driver for DRV260x
DRV260XSW-LINUX The Linux driver supports the DRV260X series of haptic motor drivers. The Linux driver supports communication through the I2C bus and interfaces with the input sub-system for a forced feedback response.

 

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported (...)

Reference designs

REFERENCE DESIGNS Download
Access Control Panel With Bluetooth Low Energy and Capacitive Touch Reference Design
TIDM-1004 — This reference design demonstrates using the SimpleLink™ MSP432™ software development kit (SDK) with the SimpleLink MSP432™ MCU, SimpleLink Bluetooth® low energy CC2650MODA network processor, and MSP430FR2633 MCU with CapTIvate™ technology in an access control panel (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Capacitive Touch Remote Control Reference Design With CapTIvate™ Technology
TIDM-CAPTIVATE-REMOTECONTROL — The touch remote control enabled with CapTIvate™ technology demonstrates a capacitive-touch solution based on a single MSP430™ microcontroller (MCU) with CapTIvate technology. This design uses self- and mutual-capacitance technology to enable a multifunctional, capacitive-touch panel (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Inductive Touch Stainless Steel Keypad Reference Design for Waterproof/Noise Immune HMI Applications
TIDA-01102 — This 16-button stainless steel keypad, which utilizes TI's inductive touch technology, demonstrates highly sensitive buttons on a single piece of 0.6mm thick stainless steel metal.  The design utilizes a MUXed approach to implement many buttons with a single LDC1614. The design is (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Touch on Metal Buttons With Integrated Haptic Feedback Reference Design
TIDA-00314 This TI Design uses Texas Instruments' inductance-to-digital converter technology to provide a high-precision method to sense button presses on a metal surface and TI's Haptic Drivers provide high quality haptics feedback to the user. TIDA-00314 demonstrates techniques for system design (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
DSBGA (YZF) 9 View options
VSSOP (DGS) 10 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Haptics in Everyday Life

Video demonstrates the many potential industrial, home, office, personal and automotive applications where haptics will improve machine and human interaction.

Posted: 14-Nov-2014
Duration: 03:20

What will you create with TI's Haptic Technolgy?

Related videos