The LM3674 step-down DC-DC converter is optimized for powering low-voltage circuits from a single Li-Ion cell battery and input voltage rails from 2.7 V to 5.5 V. It provides up to 600-mA load current over the entire input voltage range. There are several fixed output voltages and adjustable output voltage versions.

The device offers superior features and performance for mobile phones and similar portable systems. During the Pulse Width Modulation (PWM) mode, the device operates at a fixed-frequency of 2 MHz (typical). Internal synchronous rectification provides high efficiency during the PWM mode operation. In shutdown mode, the device turns off and reduces battery consumption to 0.01 µA (typical).

The LM3674 is available in a 5-pin SOT-23 package. A high switching frequency of 2 MHz (typical) allows use of only three tiny external surface-mount components, an inductor and two ceramic capacitors.

open-in-new

Find other Buck converters (integrated switch)

Download

Technical documentation

= Top documentation for this product selected by TI

No results found. Please clear your search and try again.

View all 5

	Type	Title	Date
*	Datasheet	LM3674 2-MHz, 600-mA Step-Down DC-DC Converter in SOT-23 datasheet (Rev. G)	Apr. 24, 2015
	Technical articles	Minimize the impact of the MLCC shortage on your power application	Mar. 29, 2019
	Application note	A Topical Index of TI Low Power Buck DC/DC Application Notes	Jan. 17, 2018
	User guide	2-Port USB 3.0 Hub (TIDA-00287)	Aug. 01, 2014
	User guide	AN-1427 LM3674 Evaluation Board (Rev. K)	Apr. 30, 2013

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download

2MHz, 600mA Step-Down DC-DC Converter in SOT 23-5

LM3674MF-1.8EV

document-generic

User guide

Description

The LM3674 evaluation board is a working demonstration of a step down DC-DC converter. The application note contains information about the evaluation board. The LM3674 step-down DC-DC converter is optimized for powering low voltage circuits from a single Li-Ion cell battery and input voltage rails (...)

Features

600mA max load current
Input voltage range from 2.7V to 5.5V
Available in fixed and adjustable output voltages ranging from 1.0V to 3.3V
Operates from a single Li-Ion cell Battery
Internal synchronous rectification for high efficiency
Internal soft start
0.01 microA typical shutdown current
2 MHz PWM fixed (...)

View details

Design tools & simulation

SIMULATION TOOL Download

PSpice® for TI design and simulation tool

PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

Request

Features

Leverages Cadence PSpice Technology
Preinstalled library with a suite of digital models to enable worst-case timing analysis
Dynamic updates ensure you have access to most current device models
Optimized for simulation speed without loss of accuracy
Supports simultaneous analysis of multiple products
(...)

View details

Reference designs

REFERENCE DESIGNS Download

2-Port USB 3.0 hub reference design

TIDA-00287 — This verified reference design is a two-port, USB 3.0 compliant hub. It provides simultaneous SuperSpeed and high-speed/full-speed connections on the upstream port and provides SuperSpeed, high-speed, full-speed, or low-speed connections on the downstream ports.

The hub design provides power control (...)

document-generic

Schematic

document-generic

User guide