TPS51117

ACTIVE

1.8V to 28V Input Sync Step Down Controller w/ DCAP™ Mode, Optimized for Light Load Efficiency

Top

Product details

Parameters

Vin (Min) (V) 1.8 Vin (Max) (V) 28 Vout (Min) (V) 0.76 Vout (Max) (V) 5.5 Iout (Max) (A) 10 Iq (Typ) (mA) 0.4 Iq (Typ) (uA) 400 Switching frequency (Min) (kHz) 100 Switching frequency (Max) (kHz) 550 Features Enable, Power Good, Pre-Bias Start-Up, Synchronous Rectification Operating temperature range (C) -40 to 85 Regulated outputs (#) 1 Number of Phases 1 Rating Catalog open-in-new Find other Buck controllers (external switch)

Package | Pins | Size

TSSOP (PW) 14 32 mm² 5 x 6.4 VQFN (RGY) 14 12 mm² 3.5 x 3.5 open-in-new Find other Buck controllers (external switch)

Features

  • High Efficiency, Low Power Consumption, 4.5-µA
    Typical Shutdown Current
  • Fixed Frequency Emulated On-Time Control,
    Adjustable from 100 kHz to 550 kHz
  • D-CAP™ Mode With 100-ns Load Step Response
  • < 1% Initial Reference Accuracy
  • Output Voltage Range: 0.75 V to 5.5 V
  • Wide Input Voltage Range: 1.8 V to 28 V
  • Selectable Auto-Skip/PWM-Only Operation
  • Temperature Compensated (4500 ppm/°C)
    Low-Side RDS(on) Overcurrent Sensing
  • Negative Overcurrent Limit
  • Integrated Boost Diode
  • Integrated OVP/UVP and Thermal Shutdown
  • Powergood Signal
  • Internal 1.2-ms Voltage Soft-Start
  • Integrated Output Discharge (Soft-Stop)
  • APPLICATIONS
    • Notebook Computers
    • I/O Supplies
    • System Power Supplies

All other trademarks are the property of their respective owners

open-in-new Find other Buck controllers (external switch)

Description

The TPS51117 device is a cost-effective, synchronous buck controller for POL voltage regulation in notebook PC applications. The controller is dedicated for the operation of the Adaptive On-Time D-CAP mode. This mode provides ease-of-use, low external component count, and fast transient response. Auto-skip mode for high efficiency down to the milliampere load range, or PWM-only mode for low-noise operation is selectable.

The current-sensing scheme for positive overcurrent and negative overcurrent protection is loss-less low-side RDS(on) sensing plus temperature compensation. The device receives a 5-V (4.5 V to 5.5 V) supply from another regulator such as the TPS51120 or TPS51020. The conversion input can be either VBAT or a 5-V rail, ranging from 1.8 V to 28 V, and the output voltage range is from 0.75 V to 5.5 V.

The TPS51117 is available in a 14-pin VQFN or a 14-pin TSSOP package and is specified from –40°C to 85°C.

open-in-new Find other Buck controllers (external switch)
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 3
Type Title Date
* Datasheet TPS51117 Single Synchronous Step-Down Controller datasheet (Rev. C) May 15, 2015
Technical articles Embedded Computers with TI Power in a myriad of applications May 15, 2010
User guides High Performance Synchronous Buck EVM Using the TPS51117 (Rev. A) Apr. 01, 2009

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Design tools & simulation

SIMULATION MODELS Download
SLVJ001D.ZIP (43 KB) - PSpice Model
SIMULATION MODELS Download
SLVJ002C.TSC (403 KB) - TINA-TI Reference Design
SIMULATION MODELS Download
SLVM020A.ZIP (35 KB) - TINA-TI Spice Model
SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

CAD/CAE symbols

Package Pins Download
TSSOP (PW) 14 View options
VQFN (RGY) 14 View options

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos