Home Power management DC/DC switching regulators Step-up (boost) regulators Boost converters (integrated switch)
Home
Power management
DC/DC switching regulators
Step-up (boost) regulators
Boost converters (integrated switch)
NEW

TPS61033

ACTIVE

5-V, 5-A boost converter with power good, output discharge and PFM/PWM control

Order now
Data sheet

TPS61033

ACTIVE
Data sheet Order now

Product details

Topology Boost Vin (min) (V) 1.8 Vin (max) (V) 5.5 Vout (min) (V) 2.2 Vout (max) (V) 5.5 Switch current limit (typ) (A) 5.88 Type Converter Regulated outputs (#) 1 Switching frequency (min) (kHz) 2000 Switching frequency (max) (kHz) 2800 Iq (typ) (mA) 0.018 Features Bypass Mode Pass-through Mode, Enable, Forced PWM, Frequency synchronization, Light Load Efficiency, Load Disconnect, Output discharge, Power good, Spread Spectrum, Synchronous Rectification, UVLO Fixed Duty cycle (max) (%) 90 Operating temperature range (°C) -40 to 125 Rating Catalog
Topology Boost Vin (min) (V) 1.8 Vin (max) (V) 5.5 Vout (min) (V) 2.2 Vout (max) (V) 5.5 Switch current limit (typ) (A) 5.88 Type Converter Regulated outputs (#) 1 Switching frequency (min) (kHz) 2000 Switching frequency (max) (kHz) 2800 Iq (typ) (mA) 0.018 Features Bypass Mode Pass-through Mode, Enable, Forced PWM, Frequency synchronization, Light Load Efficiency, Load Disconnect, Output discharge, Power good, Spread Spectrum, Synchronous Rectification, UVLO Fixed Duty cycle (max) (%) 90 Operating temperature range (°C) -40 to 125 Rating Catalog
SOT-5X3 (DRL) 8 3.36 mm² 2.1 x 1.6
  • Input voltage range: 1.8 V to 5.5 V
  • Output voltage range: 2.2 V to 5.5 V
    • When FB connect to VIN output voltage fixed 5.0 V
  • Two valley switching current limit options
    • TPS61033: 5.5-A typical
    • TPS610333: 1.85-A typical
  • High efficiency and power capability
    • Two 25-mΩ (LS) / 46-mΩ (HS) MOSFETs
    • Support up to 2.4 MHz with small L-C
    • Up to 93.42% efficiency at VIN = 3.3V, VOUT = 5V, and IOUT = 1A
    • Up to 90.78% efficiency at VIN = 3.3V, VOUT = 5V, and IOUT = 2A
  • Extend the system operating time
    • Typical 20-µA quiescent current into VIN pin
    • Typical 5.3µA quiescent current into VOUT pin
    • Typical 0.1-µA shutdown current
  • ±1.5% Reference voltage accuracy over –40°C to +125°C
  • Power good output with window comparator
  • Pin-selectable auto PFM or forced PWM mode at light load
  • Pass-through mode when VIN > VOUT
  • Safety and robust operation features
    • True disconnection between input and output during shutdown
    • Output overvoltage and thermal shutdown protections
    • Output short-circuit protection
  • 2.1-mm × 1.6-mm SOT583 8-Pin package
  • Input voltage range: 1.8 V to 5.5 V
  • Output voltage range: 2.2 V to 5.5 V
    • When FB connect to VIN output voltage fixed 5.0 V
  • Two valley switching current limit options
    • TPS61033: 5.5-A typical
    • TPS610333: 1.85-A typical
  • High efficiency and power capability
    • Two 25-mΩ (LS) / 46-mΩ (HS) MOSFETs
    • Support up to 2.4 MHz with small L-C
    • Up to 93.42% efficiency at VIN = 3.3V, VOUT = 5V, and IOUT = 1A
    • Up to 90.78% efficiency at VIN = 3.3V, VOUT = 5V, and IOUT = 2A
  • Extend the system operating time
    • Typical 20-µA quiescent current into VIN pin
    • Typical 5.3µA quiescent current into VOUT pin
    • Typical 0.1-µA shutdown current
  • ±1.5% Reference voltage accuracy over –40°C to +125°C
  • Power good output with window comparator
  • Pin-selectable auto PFM or forced PWM mode at light load
  • Pass-through mode when VIN > VOUT
  • Safety and robust operation features
    • True disconnection between input and output during shutdown
    • Output overvoltage and thermal shutdown protections
    • Output short-circuit protection
  • 2.1-mm × 1.6-mm SOT583 8-Pin package

The TPS61033 is a synchronous boost converter. The device provides a power supply solution for portable equipment and smart devices powered by various batteries and other power supply. The TPS61033 has 5.5-A (typical) valley switch current limit and TPS610333 has 1.85-A (typical) valley switch current limit over full temperature range.

The TPS61033 uses adaptive constant on-time valley-current-control topology to regulate the output voltage and operates at 2.4-MHz switching frequency. There are two optional modes at light load by configuring the MODE pin: auto PFM mode and forced PWM to balance the efficiency and noise immunity in light load. The TPS61033 consumes a 20-µA quiescent current from VIN at light load condition. During shutdown, the TPS61033 is completely disconnected from the input power and only consumes a 0.1-µA current to achieve long battery life. The TPS61033 has 5.75-V output overvoltage protection, output short circuit protection, and thermal shutdown protection.

The TPS61033 offers a very small solution size with 2.1-mm × 1.6-mm SOT583 package and minimum amount of external components.

The TPS61033 is a synchronous boost converter. The device provides a power supply solution for portable equipment and smart devices powered by various batteries and other power supply. The TPS61033 has 5.5-A (typical) valley switch current limit and TPS610333 has 1.85-A (typical) valley switch current limit over full temperature range.

The TPS61033 uses adaptive constant on-time valley-current-control topology to regulate the output voltage and operates at 2.4-MHz switching frequency. There are two optional modes at light load by configuring the MODE pin: auto PFM mode and forced PWM to balance the efficiency and noise immunity in light load. The TPS61033 consumes a 20-µA quiescent current from VIN at light load condition. During shutdown, the TPS61033 is completely disconnected from the input power and only consumes a 0.1-µA current to achieve long battery life. The TPS61033 has 5.75-V output overvoltage protection, output short circuit protection, and thermal shutdown protection.

The TPS61033 offers a very small solution size with 2.1-mm × 1.6-mm SOT583 package and minimum amount of external components.
open-in-new Find other Boost converters (integrated switch)
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* Data sheet TPS61033 5.5-V 5.5-A 2.4-MHz Fully-Integrated Synchronous Boost Converter, with Output Discharge Function datasheet (Rev. A) PDF | HTML 16 Mar 2023
EVM User's guide TPS61033EVM-105 Evaluation Module PDF | HTML 13 Mar 2023
Certificate TPS61033EVM-105 EU RoHS Declaration of Conformity (DoC) (Rev. A) 10 Jan 2023
Certificate TPS61033EVM EU RoHS Declaration of Conformity (DoC) 20 Oct 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS61033EVM — TPS61033 evaluation module for 5-V, 5-A boost converter with PG and PFM/PWM control

The TPS61033 is a synchronous boost converter providing a power supply solution for portable equipment and smart devices powered by various batteries and other power supply. During shutdown, the TPS61033 is completely disconnected from the input power and only consumes a 0.1-μA current to (...)

User guide: PDF | HTML
Not available on TI.com
Simulation model

TPS61033 Encrypted PSpice Model

SLVMDZ9.ZIP (129 KB) - PSpice Model
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins Download
SOT-5X3 (DRL) 8 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos