Top

Product details

Parameters

Output options Adjustable Output, Fixed Output Iout (Max) (A) 0.5 Vin (Max) (V) 10 Vin (Min) (V) 2.7 Vout (Max) (V) 5.5 Vout (Min) (V) 1.5 Fixed output options (V) 1.5, 1.6, 1.8, 2.5, 3.3 Noise (uVrms) 53 Iq (Typ) (mA) 0.08 Thermal resistance θJA (°C/W) 43 Load capacitance (Min) (µF) 10 Rating Catalog Regulated outputs (#) 1 Features Enable, Power Good Accuracy (%) 2 PSRR @ 100 KHz (dB) 29 Dropout voltage (Vdo) (Typ) (mV) 169 Operating temperature range (C) -40 to 125, -40 to 85 open-in-new Find other Linear regulators (LDO)

Package | Pins | Size

HTSSOP (PWP) 20 42 mm² 6.5 x 6.4 SOIC (D) 8 19 mm² 3.91 x 4.9 open-in-new Find other Linear regulators (LDO)

Features

  • Open Drain Power-On Reset with 200ms Delay (TPS775xx)
  • Open Drain Power Good (TPS776xx)
  • 500mA Low-Dropout Voltage Regulator
  • Available in Fixed Output and Adjustable Versions
  • Dropout Voltage to 169mV (Typ) at 500mA (TPS77x33)
  • Ultralow 85µA Typical Quiescent Current
  • Fast Transient Response
  • 2% Tolerance Over Specified Conditions for Fixed-Output Versions
  • 8-Pin SOIC and 20-Pin TSSOP PowerPAD™ (PWP) Packages
  • Thermal Shutdown Protection
  • APPLICATIONS
    • FPGA Power
    • DSP Core and I/O Voltages

PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

open-in-new Find other Linear regulators (LDO)

Description

The TPS775xx and TPS776xx devices are designed to have a fast transient response and be stable with a 10µF low ESR capacitor. This combination provides high performance at a reasonable cost.

Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 169mV at an output current of 500mA for the TPS77x33) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85µA over the full range of output current, 0mA to 500mA). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to 1µA at TJ = +25°C.

The RESET output of the TPS775xx initiates a reset in microcomputer and microprocessor systems in the event of an undervoltage condition. An internal comparator in the TPS775xx monitors the output voltage of the regulator to detect an undervoltage condition on the regulated output voltage.

Power good (PG) of the TPS776xx is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

The TPS775xx and TPS776xx are offered in 1.5V, 1.6V (TPS77516 only), 1.8V, 2.5V, 2.8V (TPS77628 only), and 3.3V fixed-voltage versions and in an adjustable version (programmable over the range of 1.5V to 5.5V for the TPS77501 and 1.2V to 5.5V for the TPS77601). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS775xx and TPS776xx families are available in 8-pin SOIC and 20-pin TSSOP packages.

open-in-new Find other Linear regulators (LDO)
Download
Similar products you might be interested in
open-in-new Compare products
Similar but not functionally equivalent to the compared device:
TPS7A26 ACTIVE 500-mA, 18-V, ultra-low-IQ, high-accuracy, adjustable low-dropout voltage regulator with power good An 18-V, 500-mA LDO regulator with power-good and ultra-low IQ (2.5 μA)

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 8
Type Title Date
* Datasheet Fast-Transient Response 500mA LDO Voltage Regulators w/RESET Output & PG Output datasheet (Rev. J) Mar. 31, 2009
Application note LDO Noise Demystified (Rev. B) Aug. 18, 2020
Technical articles LDO basics: capacitor vs. capacitance Aug. 01, 2018
Technical articles LDO Basics: Preventing reverse current Jul. 25, 2018
Application note PowerPAD™ Thermally Enhanced Package (Rev. H) Jul. 06, 2018
Technical articles LDO basics: introduction to quiescent current Jun. 20, 2018
Application note LDO PSRR Measurement Simplified (Rev. A) Aug. 09, 2017
Technical articles LDO basics: noise – part 1 Jun. 14, 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

CAD/CAE symbols

Package Pins Download
HTSSOP (PWP) 20 View options
SOIC (D) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos